Abstract
Metallic osmium (Os) is one of the most exceptional elemental materials, having, at ambient pressure, the highest known density and one of the highest cohesive energies and melting temperatures1. It is also very incompressible2,3,4, but its high-pressure behaviour is not well understood because it has been studied2,3,4,5,6 so far only at pressures below 75 gigapascals. Here we report powder X-ray diffraction measurements on Os at multi-megabar pressures using both conventional and double-stage diamond anvil cells7, with accurate pressure determination ensured by first obtaining self-consistent equations of state of gold, platinum, and tungsten in static experiments up to 500 gigapascals. These measurements allow us to show that Os retains its hexagonal close-packed structure upon compression to over 770 gigapascals. But although its molar volume monotonically decreases with pressure, the unit cell parameter ratio of Os exhibits anomalies at approximately 150 gigapascals and 440 gigapascals. Dynamical mean-field theory calculations suggest that the former anomaly is a signature of the topological change of the Fermi surface for valence electrons. However, the anomaly at 440 gigapascals might be related to an electronic transition associated with pressure-induced interactions between core electrons. The ability to affect the core electrons under static high-pressure experimental conditions, even for incompressible metals such as Os, opens up opportunities to search for new states of matter under extreme compression.
This is a preview of subscription content, access via your institution
Access options
Subscribe to this journal
Receive 51 print issues and online access
$199.00 per year
only $3.90 per issue
Buy this article
- Purchase on Springer Link
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
References
Young, D. A. Phase Diagrams of the Elements (Univ. of California Press, 1991)
Kenichi, T. Bulk modulus of osmium: high-pressure powder x-ray diffraction experiments under quasihydrostatic conditions. Phys. Rev. B 70, 012101 (2004)
Occelli, F. et al. Experimental evidence for a high-pressure isostructural phase transition in osmium. Phys. Rev. Lett. 93, 095502 (2004)
Cynn, H., Klepeis, J. E., Yoo, C.-S. & Young, D. A. Osmium has the lowest experimentally determined compressibility. Phys. Rev. Lett. 88, 135701 (2002)
Armentrout, M. M. & Kavner, A. Incompressibility of osmium metal at ultrahigh pressures and temperatures. J. Appl. Phys. 107, 093528 (2010)
Godwal, B. K., Yan, J., Clark, S. M. & Jeanloz, R. High-pressure behavior of osmium: an analog for iron in Earth’s core. J. Appl. Phys. 111, 112608 (2012)
Dubrovinsky, L., Dubrovinskaia, N., Prakapenka, V. & Abakumov, A. Implementation of micro-ball nanodiamond anvils for high-pressure studies above 6 Mbar. Nature Commun. 3, 1163 (2012)
Occelli, F., Loubeyre, P. & Letoullec, R. Properties of diamond under hydrostatic pressures up to 140 GPa. Nature Mater. 2, 151–154 (2003)
Voronin, G. A., Pantea, C., Zerda, T. W., Wang, L. & Zhao, Y. Thermal equation-of-state of osmium: a synchrotron X-ray diffraction study. J. Phys. Chem. Solids 66, 706–710 (2005)
Lifshitz, I. M. Zh. Eksp. Teor. Fiz. 38, 1569 (1960); Anomalies of electron characteristics of a metal in the high-pressure region. Sov. Phys. JETP 11, 1130 (1960)
Weinberger, M. B., Tolbert, S. H. & Kavner, A. Osmium metal studied under high pressure and nonhydrostatic stress. Phys. Rev. Lett. 100, 045506 (2008)
Ma, Y. M. et al. Electronic and crystal structures of osmium under high pressure. Phys. Rev. B 72, 174103 (2005)
Koudela, D., Richter, M., Möbius, A., Koepernik, K. & Eschrig, H. Lifshitz transitions and elastic properties of osmium under pressure. Phys. Rev. B 74, 214103 (2006)
Liang, Y. & Fang, Z. First-principles study of osmium under high pressure. J. Phys. Condens. Matter 18, 8749–8759 (2006)
Kenichi, T. Structural study of Zn and Cd to ultrahigh pressures. Phys. Rev. B 56, 5170–5179 (1997)
Kenichi, T. Absence of the c/a anomaly in Zn under high pressure with a helium-pressure medium. Phys. Rev. B 60, 6171–6174 (1999)
Klotz, S., Braden, M. & Besson, J. M. Is there an electronic topological transition in zinc under high pressure? Phys. Rev. Lett. 81, 1239–1242 (1998)
Steinle-Neumann, G., Stixrude, L. & Cohen, R. Absence of lattice strain anomalies at the electronic topological transition in zinc at high pressure. Phys. Rev. B 63, 054103 (2001)
Glazyrin, K. et al. Importance of correlation effects in hcp iron revealed by a pressure-induced electronic topological transition. Phys. Rev. Lett. 110, 117206 (2013)
Yokoo, M. et al. Ultrahigh-pressure scales for gold and platinum at pressures up to 550 GPa. Phys. Rev. B 80, 104114 (2009)
Smith, R. F. et al. Ramp compression of diamond to five terapascals. Nature 511, 330–333 (2014)
Dorogokupets, P. I. & Dewaele, A. Equations of state of MgO, Au, Pt, NaCl-B1, and NaCl-B2: internally consistent high-temperature pressure scales. High Press. Res. 27, 431–446 (2007)
Sokolova, T. S., Dorogokupets, P. I. & Litasov, K. D. Self-consistent pressure scales based on the equations of state for ruby, diamond, MgO, B2–NaCl, as well as Au, Pt, and other metals to 4 Mbar and 3000 K. Russ. Geol. Geophys. 54, 181–199 (2013)
Holmes, N. C., Moriarty, J. A., Gathers, G. R. & Nellis, W. J. The equation of state of platinum to 660 GPa. J. Appl. Phys. 66, 2962–2967 (1989)
Kotliar, G. et al. Electronic structure calculations with dynamical mean-field theory. Rev. Mod. Phys. 78, 865–951 (2006)
Martin, R. M. Electronic Structure: Basic Theory and Practical Methods 210 (Cambridge Univ. Press, 2004)
Katsnelson, M. I. & Trefilov, A. V. The effect of van der Waals and Born-Mayer interactions of ionic cores on the atomic properties of the alkali metals. Fiz. Tverdogo Tela 30, 3299–3310 (1988)
Karaziya, R. I. The collapse of the excited electron orbit and the peculiarities of the atomic spectra. Usp. Fiziol. Nauk 135, 79–115 (1981)
Matsuoka, T. & Shimizu, K. Direct observation of a pressure-induced metal-to-semiconductor transition in lithium. Nature 458, 186–189 (2009)
Ma, Y. et al. Transparent dense sodium. Nature 458, 182–185 (2009)
Georges, A., Kotliar, G., Krauth, W. & Rozenberg, M. J. Dynamical mean-field theory of strongly correlated fermion systems and the limit of infinite dimensions. Rev. Mod. Phys. 68, 13–125 (1996)
Boehnke, L. et al. Orthogonal polynomial representation of imaginary-time Green’s functions. Phys. Rev. B 84, 075145 (2011)
Aichhorn, M. et al. Dynamical mean-field theory within an augmented plane-wave framework: assessing electronic correlations in the iron pnictide LaFeAsO. Phys. Rev. B 80, 085101 (2009)
Aichhorn, M., Pourovskii, L. & Georges, A. Importance of electronic correlations for structural and magnetic properties of the iron pnictide superconductor LaFeAsO. Phys. Rev. B 84, 054529 (2011)
Gull, E. et al. Continuous-time Monte Carlo methods for quantum impurity models. Rev. Mod. Phys. 83, 349–404 (2011)
Beach, K. S. D. Identifying the maximum entropy method as a special limit of stochastic analytical continuation. Preprint at http://arxiv.org/abs/cond-mat/0403055 (2004)
Solovyev, I. V., Dederichs, P. H. & Anisimov, V. I. Corrected atomic limit in the local-density approximation and the electronic structure of d impurities in Rb. Phys. Rev. B 50, 16861–16871 (1994)
Czyżyk, M. T. & Sawatzky, G. A. Local-density functional and on-site correlations: the electronic structure of La2CuO4 and LaCuO3 . Phys. Rev. B 49, 14211–14228 (1994)
Hohenberg, P. & Kohn, W. Inhomogeneous electron gas. Phys. Rev. 136, B864–B871 (1964)
Blaha, P., Schwarz, K., Madsen, G., Kvasnicka, D. & Luitz, J. WIEN2k, An Augmented Plane Wave + Local Orbitals Program for Calculating Crystal Properties (Karlheinz Schwarz, Techn. Universität Wien, Austria, 2001)
Wills, J. M. et al. Full-Potential Electronic Structure Method (Springer, 2010)
Armiento, R. & Mattsson, A. E. Functional designed to include surface effects in self-consistent density functional theory. Phys. Rev. B 72, 085108 (2005)
Mattsson, A. E. & Armiento, R. Implementing and testing the AM05 spin density functional. Phys. Rev. B 79, 155101 (2009)
Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996); erratum. 78, 1396 (1997)
Haas, P., Tran, F. & Blaha, P. Calculation of the lattice constant of solids with semilocal functional. Phys. Rev. B 79, 085104 (2009); erratum. 79, 209902 (2009)
Ruban, A. V. & Abrikosov, I. A. Configurational thermodynamics of alloys from first-principles: effective cluster interactions. Rep. Prog. Phys. 71, 046501 (2008)
Pourovskii, L. V. et al. Impact of electronic correlations on the equation of state and transport in ε-Fe. Phys. Rev. B 90, 155120 (2014)
Katsnelson, M. I. & Trefilov, A. V. Fermi-liquid theory of electronic topological transitions and screening anomalies in metals. Phys. Rev. B 61, 1643–1645 (2000)
Nizhankovskiĭ, V. I. et al. Anisotropy of the thermal expansion of titanium due to proximity to an electronic topological transition. JETP Lett. 59, 733–737 (1994)
Souvatzis, P., Eriksson, O. & Katsnelson, M. I. Anomalous thermal expansion in alpha-titanium. Phys. Rev. Lett. 99, 015901 (2007)
Vaks, V. G. et al. Pre-transition softening and anomalous pressure dependence of shear constants in alkali and alkaline-earth metals due to band-structure effects. J. Phys. Condens. Matter 3, 1409–1428 (1991)
Rehr, J. J., Zaremba, E. & Kohn, W. van der Waals forces in the noble metals. Phys. Rev. B 12, 2062–2066 (1975)
Vonsovsky, S. V., Katsnelson, M. I. & Trefilov, A. V. Localized and itinerant behavior of electrons in metals. Phys. Met. Metallogr. 76, 247–299 (1993)
Dewaele, A., Loubeyre, P. & Mezouar, M. Equations of state of six metals above 94 GPa. Phys. Rev. B 70, 094112 (2004)
Litasov, K. D. et al. Thermal equation of state to 33.5 GPa and 1673 K and thermodynamic properties of tungsten. J. Appl. Phys. 113, 133505 (2013)
Sahu, B. R. & Kleinman, L. Osmium is not harder than diamond. Phys. Rev. B 72, 113106 (2005)
Dorfman, S. M., Prakapenka, V. B., Meng, Y. & Duffy, T. S. Intercomparison of pressure standards (Au, Pt, Mo, MgO, NaCl and Ne) to 2.5 Mbar. J. Geophys. Res. 117, B08210 (2012); errata. 117, B11204 (2012)
Fei, Y. et al. Toward an internally consistent pressure scale. Proc. Natl Acad. Sci. USA 104, 9182–9186 (2007)
Acknowledgements
L.D. and N.D. acknowledge financial support from the Deutsche Forschungsgemeinschaft (DFG) and the Federal Ministry of Education and Research (BMBF), Germany. N.D. thanks the DFG for funding through the Heisenberg Program and the DFG project number DU 954-8/1, and the BMBF for grant number 5K13WC3 (Verbundprojekt O5K2013, Teilprojekt 2, PT-DESY). M.E., Q.F., and I.A.A. acknowledge support from the Swedish Foundation for Strategic Research programme SRL grant numbers 10-0026, the Swedish Research Council (VR) grant numbers 621-2011- 4426, the Swedish Government Strategic Research Area Grant Swedish e-Science Research Centre (SeRC), and in Materials Science “Advanced Functional Materials” (AFM). The work was supported by the Ministry of Education and Science of the Russian Federation (grant number 14.Y26.31.0005). The simulations were carried out using supercomputer resources provided by the Swedish national infrastructure for computing (SNIC). M.I.K. acknowledges financial support from the ERC Advanced grant number 338957 FEMTO/NANO and from NWO via a Spinoza Prize. Portions of this work were performed at GeoSoilEnviroCARS (Sector 13), Advanced Photon Source (APS), Argonne National Laboratory. GeoSoilEnviroCARS is supported by the National Science Foundation - Earth Sciences (EAR-1128799) and Department of Energy - GeoSciences (DE-FG02-94ER14466). This research used resources of the Advanced Photon Source, a US Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under contract number DE-AC02-06CH11357.
Author information
Authors and Affiliations
Contributions
L.D., N.D., E.B., M.B., V.P., C.P., K.G., H.-P.L., and M. H. conducted the experiments. L.D. and N.D. processed the experimental data. M.E., Q.F., L.V.P., M.I.K., J.M.W., and I.A.A. performed the theoretical analysis. The manuscript was written by L.D. and I.A.A. with contributions from all other authors. All the authors commented on drafts and have approved the final version of the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Extended data figures and tables
Extended Data Figure 1 Equations of state of W.
a, Comparison of different EOSs of W reported in Dewaele et al.54, Sokolova et al.23, and Litasov et al.55, and this work. Although the curves agree for pressures up to about 50 GPa, there is a substantial discrepancy for pressures around 0.5 TPa. b, Pressure dependence of the unit cell volume of W. Experimental data points (red solid dots represent data collected using a Au–W mixture, green diamonds using a Pt–W mixture) were fitted using the third-order Birch–Murnaghan EOS (blue solid line, V0 = 31.674(3) Å3 per unit cell, K300 = 307(2) GPa, K′ = 4.53(4)); data are equally well fitted with the Vinet EOS (V0 = 31.686(7) Å3 per unit cell, K300 = 302(1) GPa, K′ = 4.82(3)).
Extended Data Figure 2 Examples of the full-profile (GSAS) treated diffraction patterns.
a, Au–Pt mixture collected in a dsDAC at 482(5) GPa (Au pressure scale from ref. 20). Even at pressures in the proximity of 5 Mbar, powder X-ray diffraction data are sufficient to clearly resolve peaks of Au and Pt, and accurately determine lattice parameters of both metals. b, W–Pt mixture, unsuccessful experiment in a dsDAC. According to the W EOS, the pressure is 461(7) GPa, whereas according to the Pt EOS, it is 559(10) GPa. This inconsistency in pressures is a result of an inhomogeneous distribution of the two metals between secondary anvils in the dsDAC; such data cannot be used for constraining EOSs. This observation also shows that very large pressure gradients are possible in dsDACs. c, Mixture of Os (a = 2.5404(6) Å, c = 4.0386(10) Å), W (a = 2.9133(5) Å), and Au (a = 3.6657(6) Å) collected in a conventional DAC (Ne used as the pressure transmitting medium) at a pressure of 134(2) GPa.
Extended Data Figure 3 Experimental dependence of the unit cell volume of Os on pressure in comparison with EOSs reported in the literature.
The magenta line is from Occelli et al.3 (K300 = 421 GPa, K′ = 4.0) and the green line is from Cynn et al.4 (K300 = 463 GPa, K′ = 2.8). These data have been re-fitted using the ruby pressure scale as suggested in refs 20, 22 and references therein. Experimental data points (solid red dots) were fitted using the third-order Birch–Murnaghan EOS (blue line, V0 = 28.02(4) Å3 per unit cell, K300 = 399(6) GPa, K′ = 4.04(4)).
Extended Data Figure 4 Electronic band structure of Os at moderate compressions along the high-symmetry lines in the hcp Brillouin zone.
Energies are given relative to the Fermi energy, which is taken to be zero. Calculations are carried out at pressures of 0 GPa (a, b), 97.5 GPa (c, d), and 134 GPa (e, f). a, c, e, The k -resolved spectral functions A( k , ω) obtained with LDA+DMFT. b, d, f, The band structure obtained with LDA. In both cases, we used the experimental lattice parameters (a = 2.734 Å, c/a = 1.580 at 0 GPa; a = 2.578 Å, c/a = 1.589 at 97.5 GPa; a = 2.540 Å, c/a = 1.590 at 134 GPa). Our LDA+DMFT calculations predict that two ETTs occur in hcp Os upon compression. In a, a band at the Γ point is well below the Fermi energy at ambient pressure; however, it nearly touches the Fermi energy at 97.5 GPa, and the corresponding hole pocket has already appeared at 134 GPa, giving rise to a change of the Fermi surface topology, that is, to an electronic topological transition at about 101.5 GPa (Extended Data Fig. 5). Our LDA+DMFT calculations also indicate that another ETT at the L point should occur above 134 GPa, at about 183 GPa (Extended Data Fig. 5).
Extended Data Figure 5 The position of the relevant bands at the Γ (top) and L (bottom) points obtained from LDA+DMFT and LDA calculations as a function of pressure.
The positive values indicate appearance of the corresponding hole pockets. Energies are given relative to the Fermi energy. A closer examination of the band shape in the vicinity of the L point reveals that this hole pocket first appears along the L–H line and then extends to include the L point. To estimate more precisely the critical pressures for the ETTs, we plot the positions of the relevant bands at the Γ and L points with respect to the Fermi level and obtain the values of the critical pressures by interpolation. The LDA+DMFT calculations predict that the hole pockets at the Γ and L points appear at about 101.5 GPa and 183 GPa, respectively.
Extended Data Figure 6 k -resolved spectral functions A( k , ω) of Os at ultra-high compressions along the high-symmetry lines in the hcp Brillouin zone.
a, b, Calculations are carried out at pressures of 247 GPa (a) and 477 GPa (b) using LDA+DMFT. The experimental lattice parameters were used in the calculations (a = 2.449 Å, c/a = 1.596 at 247 GPa; a = 2.335 Å, c/a = 1.597 at 477 GPa). Energies are given relative to the Fermi energy, which is taken to be zero. Hole pockets are present at the Γ and L points at P = 247 GPa. Increasing the pressure to 477 GPa does not induce any new ETTs. Moreover, no features of the band structure suggest that new ETTs might be induced by further increase of the pressure within reasonable limits.
Extended Data Figure 7 Electronic band structure of Os at moderate compressions along the high-symmetry lines in the hcp Brillouin zone.
a–d, Band structure of Os at 0 GPa (a, b) and at 134 GPa (c, d). Energies are given relative to the Fermi energy. In a and c, spin–orbit coupling has been included, whereas in b and d, the energies were obtained with the scalar-relativistic approximation. Experimental lattice parameters were used in the calculations (see Extended Data Fig. 4). Bands are shown in different colours for clarity.
Extended Data Figure 8 Electronic band structure of Os at extreme compressions along the high-symmetry lines in the hcp Brillouin zone.
a–d, Band structure of Os at 247 GPa (a, b) and at 477 GPa (c, d). Energies are given relative to the Fermi energy. In a and c, spin-orbit coupling has been included, whereas in b and d, the energies were obtained with the scalar-relativistic approximation. Experimental lattice parameters were used in the calculations (see Extended Data Fig. 6).
Extended Data Figure 9 Comparison of the EOS for hcp Os calculated using different approximations within DFT with the experimental EOS measured in this work.
Shown are GGA calculations carried out by us using the RSPt method (black solid line) and by Sahu et al.56 (blue dashed line), as well as LDA calculations carried out by us using the Wien2k method (red solid line), by Cynn et al.4 (pink dashed line), and by Sahu et al.56 (red dashed line). The experimental EOS obtained in this work is shown with black circles. The different curves agree reasonably well for pressures up to about 50 GPa. In contrast, there is noticeable discrepancy at ultra-high pressure, and there is no theoretical EOS that accurately describes the experiment for pressures around 0.5 TPa. Local and semi-local approximations within DFT are insufficient to describe the P–V relationship of Os under extreme conditions. Part of the reason for the disagreement between theory and experiment might be related to the improper account of the many-electron effects within the theory. In principle, LDA and GGA work better at high pressure; however, errors that might be important at low pressure47 could propagate through the EOS to the whole pressure range, owing to the use of all the calculated points in the fitting of the energy versus volume data by, for example, the third-order Birch–Murnaghan EOS used in this work. To justify this statement, consider the calculated EOS parameters, summarized in Extended Data Table 1. The equilibrium volumes calculated by us differ from the experiment (Extended Data Table 1) by less than 1.5%. On the other hand, the overestimation of the calculated bulk moduli (B) and their pressure derivatives (B′) is greater, about 10%. Our EOS parameters are within the range of theoretical parameters available in the literature, which are fitted for P < 100 GPa (Extended Data Table 1). We deal with a highly incompressible metal, for which typical DFT errors in B, and especially in B′, translate into large differences in P–V relationships at ultra-high pressure. Even in this regime, the error in volume at a fixed pressure remains within typical DFT limits of about 2%–3%. However, the pressure calculated at fixed volume can differ by several tens of gigapascals. This difference is due to errors in B and B′ calculated at ambient pressure, coupled to a very high value of B. The use of more advanced theoretical methods could improve the calculated EOS. In ref. 47, a substantial reduction of B in isoelectronic hcp Fe is demonstrated using a LDA+DMFT approach. Here the effect is expected to be smaller, but may still be sufficient to improve the agreement with experiment. Our results demonstrate a need to further develop the electronic structure theory, with the experiment reported here providing a bench-mark for the theory. On the other hand, we consistently used experimental lattice parameters in the discussion of the electronic structure of Os in this study.
Extended Data Figure 10 Comparison of the ratio of the lattice parameters c/a for hcp Os.
The ratio is calculated using the RSPt method at T = 0 K with a PBE-GGA (red dashed line), and using Wien2k with a LDA (green line) and a PBE-GGA (blue line). The room-temperature experimental results obtained in this work are shown with filled black dots. Agreement between the calculated and experimental c/a ratio is typical for DFT calculations. The theoretical results do not show any peculiarity of the lattice-parameter ratio; however, the calculations are carried out at T = 0 K, whereas the experimental data are taken at room temperature. Therefore, a direct comparison between theory and experiment is nontrivial (Methods). In hcp metals, the effect of the electronic transitions on the lattice-parameter ratio should become visible at finite temperatures, owing to the peculiarities of the thermal expansion coefficients, which are anisotropic along different directions of the crystal lattice.
Rights and permissions
About this article
Cite this article
Dubrovinsky, L., Dubrovinskaia, N., Bykova, E. et al. The most incompressible metal osmium at static pressures above 750 gigapascals. Nature 525, 226–229 (2015). https://doi.org/10.1038/nature14681
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/nature14681
This article is cited by
-
Ultrasmall single-layered NbSe2 nanotubes flattened within a chemical-driven self-pressurized carbon nanotube
Nature Communications (2024)
-
Impurities analysis of high-purity osmium target for M-cathode application
Rare Metals (2023)
-
Application of high-pressure technology in exploring mechanical properties of high-entropy alloys
Tungsten (2023)
-
Thermal conductivity of materials under pressure
Nature Reviews Physics (2022)
-
Materials synthesis at terapascal static pressures
Nature (2022)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.