Abstract
The HerA ATPase cooperates with the NurA nuclease and the Mre11–Rad50 complex for the repair of double-strand DNA breaks in thermophilic archaea. Here we extend our structural knowledge of this minimal end-resection apparatus by presenting the first crystal structure of hexameric HerA. The full-length structure visualizes at atomic resolution the N-terminal HerA-ATP synthase domain and a conserved C-terminal extension, which acts as a physical brace between adjacent protomers. The brace also interacts in trans with nucleotide-binding residues of the neighbouring subunit. Our observations support a model in which the coaxial interaction of the HerA ring with the toroidal NurA dimer generates a continuous channel traversing the complex. HerA-driven translocation would propel the DNA towards the narrow annulus of NurA, leading to duplex melting and nucleolytic digestion. This system differs substantially from the bacterial end-resection paradigms. Our findings suggest a novel mode of DNA-end processing by this integrated archaeal helicase–nuclease machine.
Similar content being viewed by others
Introduction
Ring-shaped helicases and translocases harness the chemical energy liberated from the hydrolysis of nucleotide triphosphate (NTP) and convert it into mechanical motion along DNA or RNA substrates, which they encircle1,2,3,4,5. The archaeal HerA and bacterial FtsK proteins are the founding members of a superfamily of ASCE (additional strand conserved E) RecA-like ATPases6 with identified functions in chromosome segregation during cell division, conjugation or DNA repair events7. In addition, viral homologues in this clade are responsible for packaging genetic material into the capsid following replication7,8,9. Common to all ASCE-fold proteins, the nucleotide-binding site is formed at the junction between two protomers, and thus a hexameric complex will most commonly utilize six catalytic sites10. The major contribution to nucleotide binding is provided by highly conserved cis-acting amino acids (harboured within the classic Walker A and B motifs11) located on the first subunit, while trans-acting elements donated from a second neighbouring subunit complete the site. These trans-acting residues are generally positively charged amino acids, and are often (but not exclusively) arginines, and thus commonly referred to as arginine fingers or sensors10,12; their role is to enhance NTP binding and catalysis, and to stabilize multimeric assembly. In addition, these residues play key roles in communicating the occupancy of the NTP-binding site, and the hydrolysis state of the nucleotide, from one subunit to the next.
In all thermophilic archaea, HerA is found clustered within an operon that also encodes for the NurA nuclease and the highly conserved Mre11 and Rad50 DNA repair proteins7,13,14,15,16,17. The HerA protein forms a strong physical association with NurA16,18,19 and the resulting HerA–NurA complex is competent to digest double-stranded (ds)DNA substrates14,16,19. In eukaryotic organisms, the Mre11–Rad50 complex recognizes and binds to double-stranded breaks in the DNA, before recruiting specific helicase and nuclease components to promote repair by homologous recombination (HR)20,21,22. The integrated activity of these dedicated helicase–nuclease systems is responsible for DNA end-resection. This process generates the 3′ single-stranded tails that are then coated by the Rad51 recombinase, to initiate strand invasion and HR-driven DNA repair. The operonic linkage of HerA, NurA, Mre11 and Rad50 suggests that the HerA–NurA complex may play analogous roles to the eukaryotic helicase and nuclease components that work downstream of the Mre11–Rad50 complex, to perform the DNA end-resection in archaeal organisms7,14,19,21. To date, the emerging structural and biochemical evidence from archaeal systems is supportive of this concept13,14,15,16,17,18,19.
In this study, we present the crystal structure of the HerA hexameric assembly from the thermophilic archaeon Sufolobus solfataricus, in complex with adenosine 5′—(β,γ-imido)triphosphate (AMP-PNP), a non-hydrolysable analogue of adenosine triphosphate (ATP). The HerA ring forms a toroid with an ~25-Å-wide central channel that is broad enough to accommodate B-form dsDNA. The hexameric assembly observed in the structure is stabilized by protrusions from both the N- and a C termini of each subunit, which embrace the neighbouring protomer to promote multimerization. Furthermore, while the C-terminal extension appears to be intrinsically linked to the catalytic nucleotide-binding site, the N-terminal appendage provides an exposed hydrophobic surface, which is crucial for NurA binding. Although the HerA hexamer appears ideally suited for translocating along a DNA duplex, the narrower annulus of the NurA dimer16,18 likely acts as a ‘ploughshare’23,24, resulting in separation of the DNA strands during archaeal DNA repair events. Combining structural and functional data, we propose a model for DNA translocation and processing by this putative archaeal DNA end-resection apparatus.
Results
Structure solution and architecture of the HerA hexamer
Initial efforts to crystallize S. solfataricus HerA (Sso2251) yielded only poorly diffracting crystals. Two strategies were therefore employed, in combination, to improve crystal quality. The first was to mutate methionine residues 51 and 82 to leucine, to suppress an observed heterogeneity in start-codon usage. The second strategy involved the mutagenesis of solvent-exposed residues, such as lysine and glutamate, to minimize surface side-chain entropy and favour growth of well-ordered crystals. This HerA construct harboured a total of 10 amino-acid substitutions (HerAm10: full details are given in Supplementary Methods; Supplementary Table 1), while retaining catalytic activity (Supplementary Fig. 1). The HerAm10 protein yielded highly diffracting crystals that were used to determine the X-ray structure of HerA at 2.85 Å (PDB ID 4D2I; data collection and refinement statistics given in Supplementary Table 2).
Full-length HerAm10 crystallized in spacegroup R3:H, with two protomers in the asymmetric unit, each bound to one AMP-PNP molecule (Supplementary Fig. 2a,c). The hexameric ring, considered as the functionally relevant oligomeric assembly of HerA, is generated by the threefold crystallographic symmetry (Fig. 1a,c–f). Overall, the HerA ring has a compact architecture with dimensions of ~100 Å across and ~100 Å in height; a central channel of ~25 Å in diameter is well suited for accommodating approximately three turns of B-form dsDNA. The entire chain of the HerA protomer was visible in the electron density map, with the exclusion of 23 amino acids at the C terminus, which were disordered. Thus, our crystallographic model visualizes all three domains of the HerA protomer: the N-terminal β-barrel domain, the central RecA-like catalytic core and a flanking four-helix bundle (Fig. 1b). The tripartite structure of the HerA protomer adopts an extended conformation, so that each domain of the protomer makes extensive interactions with the same domain of adjacent chains in the hexameric ring. The four-helix bundles arrange to form the putative entrance to the pore, providing a positively charged surface suitable for guiding DNA into the channel (Fig. 1e,f). Structural homology searches using the PDBeFold SSM server ( http://www.ebi.ac.uk/msd-srv/ssm/) identified Thermoanaerobacter pseudethanolicus VirB4 (an ATPase of the bacterial Type IV secretion system) as the closest structural homologue of HerA (PDB ID 4AG5 (ref. 25), with an r.m.s.d. of 2.9 Å over 275 Cα atoms of the RecA-like and helix bundle domains; Supplementary Fig. 2b).
In agreement with earlier bioinformatic predictions7 the first 104 amino acids of the HerA protein form a six-stranded β-barrel domain (absent from the VirB4 protomer; Supplementary Fig. 2b), which bears clear similarity to the β-barrel fold seen at the N terminus of the bovine F1-ATP synthase26, PDB ID 1BMF). The HerA HAS (HerA and ATP synthase7) β-barrel domains form an N-terminal toroidal crown, assembled on top of the central hexameric ring of RecA-like domains. Uniquely to the HAS domain of HerA, a helical extension originating between the 4th and 5th strands of each β-barrel (Figs 1a–d and 2a,b) packs against the top of the adjacent HAS barrel, apparently stabilizing the hexameric assembly.
While the extension from the HAS domain fastens the N-terminal crown of the assembly, a C-terminal protrusion also stabilizes the hexamer by traversing the nucleotide-binding site to embrace the RecA-like domain of the neighbouring protomer (Fig. 1a,b). Thus, protrusions from both the N- and C termini engage in inter-subunit contacts that contribute to stabilizing the multimeric assembly (Fig. 1a–d). In addition, the C-terminal extension associates with the catalytic nucleotide-binding site of the neighbouring subunit; this critical interaction is discussed in detail below.
The HAS domain mediates the interaction with NurA
Inspection of the protomer-bridging α-helical extension at the top of the HAS barrel revealed a hydrophobic patch formed by residues L51 (mutated from M51 in the HerAm10), M56, I61 and L65 (Fig. 2a,b). As we had previously established that the HAS domain was crucial for the interaction with the NurA nuclease16, we reasoned that this exposed hydrophobic site might mediate the association with NurA. We therefore performed site-directed mutagenesis of these four hydrophobic residues, reversing their chemical nature by mutation to the charged residue glutamic acid. As predicted, the individual mutations resulted in a significantly weakened interaction with NurA, as determined by analytical gel filtration chromatography (Fig. 2c; Supplementary Fig. 3). Thus, we propose that the α-helical extension of the HAS domain performs two essential and complementary roles, by providing an exposed hydrophobic surface for interaction with NurA, and stabilizing the hexameric assembly by homotypic in trans interaction with the HAS barrel of the adjacent subunit.
The C-terminal ‘brace’ interacts with the ATP-binding site
The RecA-like ATPase domain is located in the middle of the HerA protomer and consists of a central seven-strand parallel β-sheet surrounded by eight α-helices (Fig. 1b). The β-sheet terminates with four additional antiparallel strands7,27, folded as a separate, distorted sheet-like structure. Extending from this feature, the aforementioned C-terminal protrusion traverses the active site to embrace the adjacent protomer (Fig. 3a).
A similar protrusion (referred to as a ‘brace’) has previously been shown to stabilize hexameric assembly in the E1 papillomavirus replicative helicase28. Indeed, a basic model of this E1 brace was also proposed, based on small-angle X-ray scattering (SAXS) measurements28. Our crystallographic analysis provides a view of the HerA brace at atomic resolution, revealing novel features. A series of conserved hydrophobic contacts keeps the brace pinned to the two HerA protomers, while a conserved glycine residue (G465) provides flexibility to the arrangement (Fig. 3a). The hydrophobic positioning of the brace helps orient a conserved aspartate (D471) towards the nucleotide-binding site, at the cleft between protomers (Fig. 3a).
Structural superposition of the nucleotide-binding sites of both the HerA and E1 proteins revealed further interesting similarities (Fig. 3b). Although E1 belongs to the AAA+, rather than the RecA-like family of ATPases29,30, the arrangement of catalytic residues surrounding the nucleotide-binding cleft is comparable in E1 and HerA (Fig. 3b and PDB ID 2GXA31). Since the E1 ring-shaped ATPase represents a paradigm for DNA translocation, we decided to explore potential mechanistic similarities between these two proteins.
The structural superposition of HerA and E1 revealed conservation of the key cis-acting residues that form the P-loop (ATP phosphate group-binding loop) of the Walker A motif, and the acidic catalytic elements of the Walker B motif on the first subunit. In addition, three basic residues donated in trans from the neighbouring subunit are also conserved in the E1 and HerA structures (Fig. 3b). In all ring-shaped ASCE ATPases, trans-acting residues facilitate catalysis by stabilizing the transition state during nucleotide hydrolysis1,3,10,12. In both the HerA and E1 structures, the middle of the three basic trans-acting residues (R142 and R538, respectively) associates with the nucleotide γ-phosphate mimic (Fig. 3b), apparently positioning it for nucleophilic attack. In the AMP-PNP-bound state observed in the HerA structure, the second trans-acting arginine, R381, forms a salt bridge with E356 of the Walker B motif. This interaction is deemed necessary for both stable interface formation and water activation prior to catalysis1.
Intriguingly, in the HerA structure the R142 trans-acting residue also forms a salt bridge with the previously described aspartate D471 (Fig. 3b), harboured on the C-terminal brace of the neighbouring protomer (Fig. 3a,b). A similar acidic residue (D497) interacts with the equivalent arginine in the E1 structure (R538), although this aspartate acts in-cis from the same chain (Fig. 3b). Nevertheless, the equivalent arrangement of these acidic residues at the nucleotide-binding sites of both enzymes suggests a common function. Since the HerA brace interacts with the R142 trans-acting residue of the adjacent protomer at the nucleotide-binding cleft, it seems plausible that this extension also plays important functional roles in the chemo-mechanical cycle.
Mutational analysis of the nucleotide-binding site
Having identified the key amino acids conserved at the ATP-binding site of HerA, we performed site-directed mutagenesis to examine their role in catalysis. We mutated the P-loop lysine of the Walker A motif (K154A), the trans-acting arginine residues (R142A and R381A) and the aspartate 471 on the C-terminal brace (D471A), switching to alanine in each case. Three different functional assays were employed to investigate the effect of these substitutions: an ATPase assay (Fig. 4a), to measure ATP hydrolysis by the wild-type (WT) and mutant HerA–NurA complexes16; a DNA destruction assay (Fig. 4b; Supplementary Fig. 4), to examine the ability of the HerA–NurA complex to translocate and digest a linear 5.3-kb dsDNA substrate; and a DNA-unwinding assay by a nuclease-inactivated HerA–D58A NurA complex, using short radiolabelled oligonucleotide substrates (Fig. 4c; Supplementary Fig. 5), as described in our previous study16.
We had previously shown that NurA association was required for HerA catalytic activity16, and therefore the HerA–NurA complex was used in all three assays. Consistent with our previous work16, the WT complex displayed an approximately twofold higher level of ATPase activity on blunt- relative to overhang dsDNA substrates (Fig. 4a). Furthermore, no activity was detectable in the absence of the DNA substrate, in keeping with our previous results16. In addition, the K154A Walker A mutation11 resulted in the complete loss of activity in all functional assays, as expected (Fig. 4a; Fig. 4b, lanes 6–10; Fig. 4c, lane 4).
In contrast, mutation of the R142 trans-acting residue generated unanticipated results. The proximity of this residue to the terminal phosphate of the AMP-PNP in the structure was indicative of a role in catalysis; similar arrangements in other multimeric ATPases have been proposed to stabilize the transition state during nucleotide hydrolysis1. However, rather than inhibiting the complex, the R142A mutation appeared to stimulate the catalytic activity of the HerA–NurA complex (Fig. 4a; Fig. 4b, lanes 11–15; Fig. 4c, lane 5). The most notable effect was observed in the ATPase assay: while activity increased relative to the WT complex for all three DNA substrates, stimulation was most pronounced on the substrates with overhangs (Fig. 4a). Thus, while the WT complex processed blunt-ended substrates more efficiently than those with overhangs, this difference was not observed in the R142A mutant, and a similar high level of ATPase activity was seen on both types of substrate. Intriguingly, the R142A mutation also resulted in a subtle increase in ATPase activity in the absence of a DNA substrate. Taken together, these observations suggest that the R142 residue performs a more regulatory function in the chemo-mechanical cycle of the HerA–NurA complex, rather than a lead role in catalysis.
In contrast, the R381A mutation had an inhibitory effect on the activity of the complex, but to a different extent in the various assays. Thus, the R381A HerA mutant complex was incapable of DNA unwinding (Fig. 4c, lane 6) and its ATPase activity was severely impaired, while its activity in the DNA destruction assay was also reduced, but not abrogated (Fig. 4a; Fig. 4b, lanes 16–20). Intriguingly, R381 did not interact directly with the AMP-PNP moiety in the crystal structure, suggesting a possible conformational reconfiguration of the ATP-binding site during catalysis. Indeed, sequence alignments of HerA with other hexameric RecA-like helicases revealed that the R381 residue is equivalent to the arginine finger residue of TrwB (R375), VirB4 (R496) and FtsK (R620) (Fig. 5)7,25,32,33,34. In both TrwB and VirB4 this trans-acting arginine residue has been shown to be mobile, positioning at the nucleotide-binding site to interact with the ATP terminal phosphate during hydrolysis25,32. Taken together, the results of the functional assays for R142 and R381 suggest a partial functional redundancy between the two trans-acting arginines. Indeed, a complete loss of ATPase activity was only observed with a double alanine mutation of both arginines, R142A/R381A (Fig. 4a).
The brace influences the catalytic activity of HerA–NurA
The direct interaction of the C-terminal brace with trans-acting R142 prompted us to investigate its role in the activity of the HerA–NurA complex. Alanine mutation of the conserved D471 caused a severe impairment in the DNA destruction assays (Fig. 4b, lanes 26–30). In addition, a triplex displacement assay, which specifically measured the ability of the complex to translocate on dsDNA and sterically exclude a Hoogstein-bonded triplex strand16,35, confirmed that the D471A mutant resulted in reduced levels of DNA translocation (Fig. 4d, lane 5). Furthermore, premature truncation of the C-terminal tail by introduction of a stop codon at G465 produced a more severe inhibition (Fig. 4d, lane 6). In contrast, ATPase activity increased as a result of the D471A mutation on all dsDNA substrates (Fig. 4a), with a most pronounced enhancement on the substrates with overhangs. Consequently, the resultant level of ATPase activity was now similar on all of the DNA substrates, as was observed with the R142A mutant (Fig. 4a). These data suggest that the D471 residue on the C-terminal brace is not required for the hydrolysis of ATP per se, but instead seems to assist in the conversion of ATP hydrolysis into DNA translocation.
The roles of D471 and R142 in ATP hydrolysis were investigated further by generating a R142A/D471A double mutant. Whereas the WT complex required engagement of a DNA substrate for the activation of nucleotide hydrolysis, the ATPase activity of the R142A/D471A double mutant became independent of DNA. This substrate-independent ATP turnover was comparable to the activity observed with the WT complex on blunt-ended DNA (Fig. 4a). Thus, the DNA dependence of ATP hydrolysis observed in the WT complex appears to be mediated by interaction between R142 and D471. In contrast, a HerA–NurA complex containing the double R381A/D471A HerA mutant was completely inactive in the absence of a DNA substrate (Fig. 4a). We noted, however, that DNA substrates with single-stranded overhangs elicited a small rise in ATPase activity in this double mutant, relative to the R381A single mutant. Taken together, the results of the functional analysis suggest that the C-terminal brace of HerA has an important yet complex role in coupling ATP hydrolysis to mechanical work.
A putative DNA-binding loop is linked to the active site
In hexameric ATPases, the concerted movement of pore-lining DNA-binding loops has been shown to drive translocation along DNA substrates31,36,37. Closer inspection of the channel in the HerA ring revealed the presence of a loop spanning residues F360 to L368 and lining the inner surface of the central pore. The loop was located at the opposite end of the kinked α-helix bearing the trans-acting R381 residue (Fig. 6a,b). Alanine mutation of the conserved loop residue K363, which projects into the central pore38, resulted in impaired DNA processing in the destruction assays, and inhibition was also observed in the helicase assays (Fig. 4b, lanes 21–25; Fig. 4c, lane 7). Conversely, ATPase activity actually increased in the K363A mutant, particularly on the substrates with single-stranded overhangs, as we observed with the R142A and D471A mutants (Fig. 4a). The partial uncoupling of ATP hydrolysis from mechanical work appears consistent with a role for K363 in DNA translocation.
The order of ATP hydrolysis events around the HerA ring
We also investigated whether the sequence of ATP hydrolysis at the six nucleotide-binding sites of the hexameric ring followed an ordered and sequential pattern of events during translocation of the HerA–NurA complex along the DNA, as in previously published models of other multimeric helicases31,37,39,40. A mutant-doping approach, as described in previous studies34,41,42, was adopted, where the WT HerA protein was mixed with the catalytically inactive K154A mutant, resulting in the formation of heterologous HerA rings (Supplementary Fig. 6). We followed the effect of K154A doping using the DNA-unwinding assay. Increasing the ratio of K154A to WT HerA resulted in an exponential drop in the proportion of unwound DNA substrate (Fig. 7a,b). This result indicated that the introduction of a single mutant subunit within the HerA ring rendered the complex incompetent for DNA unwinding. Thus, productive unwinding of DNA substrates requires a coordinated series of ATP hydrolysis events around the active sites of the HerA ring, as has been reported for other hexameric ATPases34,41,42.
Small-angle X-ray scattering analysis of the HerA–NurA complex
The structure-based mutagenesis data presented here are in agreement with the coaxial arrangement for the HerA–NurA complex predicted in our previously published study16, where the NurA dimer docks on top of the HAS-barrel face of the HerA hexamer. We note that the exposed hydrophobic patches on the surface of NurA16 and HerA, identified by mutagenesis, appear suitably aligned to mediate this interaction (Supplementary Fig. 7). To provide further insight into the mechanism of DNA-end processing by the HerA–NurA complex, we analysed its three-dimensional architecture by SAXS. SAXS analysis of the HerA–NurA complex resulted in the generation of a molecular envelope that is compatible with the predicted coaxial arrangement of the individual HerA and NurA components (see Fig. 8a). Closer inspection of the envelope confirmed a pore-like cavity in the density, permitting unambiguous docking of the hexameric HerA crystal structure (see Fig. 8b). Combining this observation with knowledge of the reciprocal hydrophobic interaction surfaces on HerA and NurA enabled subsequent docking of the dimeric NurA crystal structure16 into the remaining density. SAXS data processing and model-generation steps are summarized in Fig. 8c–f, and full details of the experimental procedures and data analyses are provided in the Methods section.
Discussion
Ring-shaped multimeric ATPases regulate a wide variety of crucial biological processes such as DNA replication, transcription and repair in cellular and viral systems1,3,4,43,44. In all cases, the energy liberated from NTP binding and hydrolysis triggers conformational changes that result in mechanical work on the substrate. Similarly, the hexameric ring of the archaeal HerA ATPase harnesses the energy generated from nucleotide hydrolysis to translocate the HerA–NurA complex along DNA substrates14,19,21. To date, our understanding of DNA-end processing in preparation for DNA repair is restricted by our limited structural and mechanistic insight into the helicase–nuclease systems that are predisposed to this task. We have focused our attention on the archaeal HerA–NurA helicase–nuclease complex, which is encoded together with the Mre11–Rad50 complex within a conserved operon of thermophilic archaea7,14,17. Recent evidence shows that DNA-end processing in this archaeal system is substantially different from the established paradigms in the field, such as the bacterial RecBCD, AddAB or AdnAB complexes24,45,46.
When taken together, the data presented here lead us to propose a possible mechanism for DNA-end processing by the HerA–NurA complex (Fig. 9a–d). Mutagenesis mapping of the reciprocal interaction surfaces for nuclease and helicase (Fig. 2b)16, and the SAXS analysis of the HerA–NurA complex are compatible with a concentric arrangement of the NurA toroid with the HAS domain ‘crown’ of the HerA ring (Fig. 8d; Supplementary Fig. 7). Docking of these two annular components would form a coaxial structure, able to thread the DNA substrate through the HerA motor and towards the NurA nuclease. We surmise that DNA would enter the HerA ring via the positively charged face formed by the helix bundle domains, leading to a central channel capable of accommodating up to three turns of B-form dsDNA (Figs 1f and 9a). As the DNA substrate exits the HerA channel, it would then be processed by the dimeric NurA nuclease. Since the NurA toroid is too narrow to accommodate B-form dsDNA16, the dimeric nuclease would act as a molecular ‘ploughshare’23 by melting the DNA duplex and guiding each strand towards its two active sites. High-affinity binding of the single-stranded DNA by NurA16 is likely to reduce substrate slippage, and enhance processive translocation. Similarly, the E1 papillomavirus helicase has been reported to utilize an analogous, although integral, DNA-binding domain to enhance DNA unwinding, by preventing unproductive sliding47.
It should be noted that the HerA planar ring observed in the AMP-PNP-bound structure might undergo conformational changes during DNA translocation. In other ring-shaped multimeric ATPases, catalytic activity is driven by an ordered series of events at the nucleotide-binding sites, alternating between ATP-bound, adenosine diphosphate-bound and empty states. This often coincides with the ‘staircasing’ of the DNA-binding loops, or the protomers themselves, to match the pitch of the sugar–phosphate backbone of the DNA31,37,38. In other oligomeric motor protein systems, movements of substrate-binding loops are associated with occupancy and the hydrolysis state of NTP at the nucleotide-binding site, and thus mediate the conversion of chemical energy into mechanical work31,36,37,39,48. Indeed, DNA-binding loop movement in the P4 hexameric bacteriophage ϕ12 ATPase has also been associated with trans-acting arginine finger positioning36. In the HerA hexamer, the proximity of the equivalent R381 trans-acting arginine to the putative DNA-binding loop, harbouring K363 (Fig. 6), suggests that structural changes at the ATP-binding site are transmitted to the substrate-binding channel. Thus, local changes in the positioning of R381, as a result of ATP binding, hydrolysis and release, could result in DNA-binding loop movement, and substrate translocation, similar to reported mechanisms in other multimeric ATPases1,3,4,10,12 (Fig. 9b,c).
The C-terminal brace observed in the HerA structure is critical for DNA processing by the HerA–NurA complex. An analogous C-terminal brace has been previously visualized at low resolution by SAXS in the papillomavirus E1 helicase, and has been shown to maintain multimeric assembly28. In HerA, this brace also appears to regulate the catalytic events at the ATP-binding sites of the hexamer. The conserved brace aspartate 471 forms a salt bridge with the R142 trans-acting arginine from the adjacent subunit (Figs 3a and 9b,c). Formation of this salt bridge is likely to dissipate the negative charge on the arginine residue, reducing catalytic potential. Indeed, a D471A mutant exhibits increased ATP turnover, although it is unable to process DNA efficiently (Fig. 4a,b). The brace therefore appears to play a role in coupling the chemical events at the catalytic sites into mechanical motion along the DNA. It is tempting to speculate that the C-terminal brace may act as a molecular ‘timing-belt’ to ensure an ordered and sequential propagation of ATP hydrolysis during directional DNA translocation (Fig. 9b,c).
The R142–D471 association also seems to regulate the ATPase activity of the HerA–NurA complex in response to substrate engagement. Nucleotide turnover in the WT complex is strictly dependent upon DNA binding and is modulated by DNA end-type: overhang substrates elicit only half the level of hydrolysis generated by blunt-ended molecules. Intriguingly, an R142A mutation alleviates this discrepancy by approximately doubling ATP turnover on overhang DNA (Fig. 4a). Furthermore, the R142A–D471A mutant is competent to hydrolyse ATP even in the absence of a substrate (Fig. 4a). We therefore propose that the R142–D471 interaction captured in our structure might exclude the second arginine finger (R381) from optimal positioning at the active site, until dsDNA is engaged.
Our study has revealed the first crystallographic structure of the HerA hexameric ATPase. This completes our structural knowledge of the four individual components of the minimal archaeal end-resection apparatus19 encoded by the Mre11–Rad50 operon16,18,49,50,51. Clearly, additional structural and functional studies will be required to elucidate the precise mechanisms that underpin translocation and substrate processing by the HerA–NurA complex. In particular, it remains uncertain how DNA end-resection might be regulated to generate the 3′ single-stranded tails required for HR. It is also unknown how the Mre11–Rad50 DNA repair complex, conserved in eukaryotes and archaea, is involved in the recruitment, or modulation, of the HerA–NurA complex. Future analyses using archaeal models should provide us with new insights into the mechanisms that drive HerA and other multimeric ring-shaped translocases. In addition, these studies should improve our understanding of the helicase–nuclease systems that regulate DNA end-resection, a process essential for HR-mediated DNA repair in all domains of life.
Methods
Protein purification
Untagged native herA and nurA open-reading frames cloned into the pET30 expression vector were purified as described previously16. Briefly, cell lysates were heat-clarified and soluble proteins were subsequently purified by affinity chromatography, using a Hi-Trap heparin column and size-exclusion chromatography over a Superdex 200 16/600 column. Mutant constructs were generated from the WT clones by site-directed mutagenesis (QuikChange, Stratagene). Full details are given in the Supplementary Methods.
Crystallization and X-ray structure determination
A preliminary, incomplete crystal structure of the HerA hexamer bound to AMP-PNP was determined by multi-wavelength anomalous dispersion using selenomethionine-labelled crystals and refined to a resolution of 3.4 Å. This partial structure was then used as a molecular replacement search model for a native data set, ultimately leading to a complete structure refined to 2.85 Å. Full details of crystallization, structure determination and subsequent refinement are given in the Supplementary Methods. Coordinates and structure factors have been deposited in the Protein Data Bank under entry ID 4D2I.
Size-exclusion chromatography (analytical gel filtration)
Physical interactions between the native NurA protein and either native or mutant HerA proteins were examined by size-exclusion chromatography using an analytical S200 HR 10/300 column (GE Healthcare) as described previously16. HerA–NurA complexes were formed at 60 °C, prior to the gel filtration analysis. Further experimental details are described in the Supplementary Methods.
Combined HerA–NurA DNA unwinding and nuclease assays
The catalytic activity of the native HerA–NurA complex, and also the mutant HerA proteins in complex with native NurA, was examined in a combined DNA-unwinding and digestion assay on a linear 5.5-kb dsDNA substrate (DNA destruction assay). Briefly, 2.5 μM of the HerA hexamer and 2.5 μM NurA dimer were mixed at 60 °C for 20 min to form the complex, before addition of the DNA substrate at 1.25 nM. Reactions were terminated with 0.4% SDS and 0.15 mg ml−1 proteinase K. Products were resolved on a 0.8% agarose gel and visualized with ethidium bromide stain. Further experimental details are described in the Supplementary Methods.
DNA-unwinding (helicase) reactions
DNA-unwinding reactions, using the D58A nuclease inactive NurA protein16. WT or mutant hexameric HerA (0.5 μM) and 0.5 μM dimeric D58A NurA were preincubated at 60 °C for 20 min before addition of a 10-nM 32P-labelled dsDNA substrate and incubated at 60 °C for 30 min. Reactions were terminated by the addition of 20 μl stop buffer (100 mM EDTA, 0.5% SDS, 0.1 % bromophenol blue and 50% glycerol), and separated on 12% SDS–polyacrylamide gel electrophoresis in 1 × TBE (Tris, Borate, EDTA), 0.2% SDS at 7.5 V cm−1. Gels were dried and results were visualized by phosphoimaging (GE Healthcare Typhoon system). Further experimental details are described in the Supplementary Methods.
ATPase methods
The turnover of ATP by mutant HerA–NurA complexes was determined as previously described in earlier work16, utilizing a proprietary malachite dye kit (Pi ColorLock Gold—Innova Biosciences) to monitor the release of inorganic phosphate (Pi). Variations to these methods are described in the Supplementary Data.
Triplex displacement assays
Triplex displacement assays were based on the method of Firman and Szczelkun35, but using a SwaI linearized form of the plasmid pLKS5, positioning the 22 nucleotide triplex-forming oligo (TFO) centrally within the 7,500-bp vector. The TFO was end labelled with γ-32P using polynucleotide kinase. Triplexes were formed as previously described16,35. WT or mutant HerA and D58A NurA proteins were preincubated in reaction buffer (25 mM MES, 50 mM NaCl, 10 mM MgCl2, 0.5 mM spermidine and 3 mM ATP, pH 5.5) at 60 °C for 30 min and then cooled to 50 °C. Triplex (5 nM) was added to the HerA–NurA complex and incubated at 50 °C for appropriate time. Reactions were terminated by cooling on ice and addition of 6 × glycerol loading buffer (30% glycerol, 20 mM Tris pH 8, 0.25% bromophenol blue and 0.6% SDS). Products were resolved on 1% agarose gels in 40 mM tris-acetate, 5 mM sodium acetate, 1 mM MgCl2, pH 5.5 buffer at 120 V for 2.5 h at 4 °C, and viewed by phosphoimaging. Further experimental details are described in the Supplementary Methods.
Helicase complementation assays (mutant-doping assays)
Native and catalytically inactivated (K154A) HerA were mixed together at the ratios indicated and incubated at 60 °C for 20 min, to permit the formation of hybrid hexamers. Dimeric D58A (nuclease inactivated) NurA was then added and the reaction incubated for a further 20 min at 60 °C to allow the formation of the HerA–D58ANurA complex. The hybrid complexes were then used in the helicase assays as described above. Further experimental details are provided in the Supplementary Methods.
Small-angle X-ray scattering
SAXS data were collected at the SWING beamline of the SOLEIL synchrotron (Gif-sur-Yvette, France) using a robotic sample changer and an Agilent HPLC-coupled SAXS cell52,53. Prior to sample loading, 60 μl of the HerA–NurA complex (using HerA harbouring both M51L and M82L mutations, and NurAD58A) were formed by heating individual components together at 60 °C for 20 min, at a final concentration of 14.2 μM (assuming a 6:2 HerA:NurA stoichiometry), with a fourfold excess of NurAD58A dimer, in the presence of 0.2 mM ATP and 1 mM MgCl2. Approximately 50 μl protein was injected into the SAXS flow-through cell at a flow rate of 150 μl min−1 via a size-exclusion chromatography column (GE Superdex 200 Increase 3.2/300) pre-equilibrated with SAXS buffer (20 mM Hepes pH 7.0, 300 mM NaCl, 5% v/v glycerol, 0.2 mM ATP and 1 mM MgCl2). The quartz capillary cell (1.5 mm diameter, 10 μm wall thickness) was thermostated to 288 K during data collection. Both cell and detector (a 17 × 17 cm2 low-noise Aviex CCD) were housed in a vacuum chamber, with a sample-detector distance of 1.786 m. Approximately 250 frames of scattering data were collected at a wavelength (λ) of 1.022 Å during sample elution, with 1.5-s frame duration and 0.5-s dead time between frames. A dedicated in-house application (‘FOXTROT’) was used to average frames across the elution peak of the complex and subtract buffer scattering.
Averaged SAXS data were subsequently processed by components of the ATSAS package53. Briefly, in PRIMUS the forward scattering I(0) and the radius of gyration Rg were evaluated using the Guinier approximation: for small angles (q<1.3/Rg), I(q)=I(0) exp(−(1/3)(qRg)2). The indirect transform package GNOM confirmed these parameters from the entire data range and calculated the pair-distance distribution function P(r), enabling estimation of the maximum particle dimension, Dmax. The ab initio modelling program DAMMIF was used for low-resolution shape analysis, with 20 independent models generated in the ‘slow’ mode and subsequently averaged and filtered by DAMAVER. The latter program also yielded a value of normalized spatial discrepancy, used to determine similarities between different models and identify outliers. A molecular envelope was generated from the filtered averaged bead model using the pdb2vol component of the Situs package54. Crystallographic models of HerA (PDB code: 4D2I) and NurA (PDB code: 2YGK16) were manually docked into the molecular envelope and visualized using the UCSF Chimera package55,56.
Additional information
How to cite this article: Rzechorzek, N. J. et al. Structure of the hexameric HerA ATPase reveals a mechanism of translocation-coupled DNA-end processing in archaea. Nat. Commun. 5:5506 doi: 10.1038/ncomms6506 (2014).
Accession codes: The coordinates and structure factors of the S. solfataricus HerA crystal structure have been deposited in the Protein Data Bank under accession code 4D2I.
Accession codes
References
Enemark, E. J. & Joshua-Tor, L. On helicases and other motor proteins. Curr. Opin. Struct. Biol. 18, 243–257 (2008).
Kainov, D. E., Tuma, R. & Mancini, E. J. Hexameric molecular motors: P4 packaging ATPase unravels the mechanism. Cell. Mol. Life Sci. 63, 1095–1105 (2006).
Singleton, M. R., Dillingham, M. S. & Wigley, D. B. Structure and mechanism of helicases and nucleic acid translocases. Annu. Rev. Biochem. 76, 23–50 (2007).
Lyubimov, A. Y., Strycharska, M. & Berger, J. M. The nuts and bolts of ring-translocase structure and mechanism. Curr. Opin. Struct. Biol. 21, 240–248 (2011).
Thomsen, N. D. & Berger, J. M. Structural frameworks for considering microbial protein- and nucleic acid-dependent motor ATPases. Mol. Microbiol. 69, 1071–1090 (2008).
Leipe, D. D., Wolf, Y. I., Koonin, E. V. & Aravind, L. Classification and evolution of P-loop GTPases and related ATPases. J. Mol. Biol. 317, 41–72 (2002).
Iyer, L. M., Makarova, K. S., Koonin, E. V. & Aravind, L. Comparative genomics of the FtsK-HerA superfamily of pumping ATPases: implications for the origins of chromosome segregation, cell division and viral capsid packaging. Nucleic Acids Res. 32, 5260–5279 (2004).
Burroughs, A. M., Iyer, L. M. & Aravind, L. Comparative genomics and evolutionary trajectories of viral ATP dependent DNA-packaging systems. Genome Dyn. 3, 48–65 (2007).
Happonen, L. J. et al. The structure of the NTPase that powers DNA packaging into Sulfolobus turreted icosahedral virus 2. J. Virol. 87, 8388–8398 (2013).
Ogura, T., Whiteheart, S. W. & Wilkinson, A. J. Conserved arginine residues implicated in ATP hydrolysis, nucleotide-sensing, and inter-subunit interactions in AAA and AAA+ ATPases. J. Struct. Biol. 146, 106–112 (2004).
Walker, J. E., Saraste, M., Runswick, M. J. & Gay, N. J. Distantly related sequences in the alpha- and beta-subunits of ATP synthase, myosin, kinases and other ATP-requiring enzymes and a common nucleotide binding fold. EMBO J. 1, 945–951 (1982).
Crampton, D. J., Guo, S., Johnson, D. E. & Richardson, C. C. The arginine finger of bacteriophage T7 gene 4 helicase: role in energy coupling. Proc. Natl Acad. Sci. USA 101, 4373–4378 (2004).
Constantinesco, F., Forterre, P. & Elie, C. NurA, a novel 5′-3′ nuclease gene linked to rad50 and mre11 homologs of thermophilic Archaea. EMBO Rep. 3, 537–542 (2002).
Constantinesco, F., Forterre, P., Koonin, E. V., Aravind, L. & Elie, C. A bipolar DNA helicase gene, herA, clusters with rad50, mre11 and nurA genes in thermophilic archaea. Nucleic Acids Res. 32, 1439–1447 (2004).
Quaiser, A., Constantinesco, F., White, M. F., Forterre, P. & Elie, C. The Mre11 protein interacts with both Rad50 and the HerA bipolar helicase and is recruited to DNA following gamma irradiation in the archaeon Sulfolobus acidocaldarius. BMC Mol. Biol. 9, 25 (2008).
Blackwood, J. K. et al. Structural and functional insights into DNA-end processing by the archaeal HerA helicase-NurA nuclease complex. Nucleic Acids Res. 40, 3183–3196 (2012).
Manzan, A. et al. MlaA, a hexameric ATPase linked to the Mre11 complex in archaeal genomes. EMBO Rep. 5, 54–59 (2004).
Chae, J., Kim, Y. C. & Cho, Y. Crystal structure of the NurA-dAMP-Mn2+ complex. Nucleic Acids Res. 40, 2258–2270 (2012).
Hopkins, B. B. & Paull, T. T. The P. furiosus mre11/rad50 complex promotes 5' strand resection at a DNA double-strand break. Cell 135, 250–260 (2008).
Mimitou, E. P. & Symington, L. S. Nucleases and helicases take center stage in homologous recombination. Trends Biochem. Sci. 34, 264–272 (2009).
Blackwood, J. K. et al. End-resection at DNA double-strand breaks in the three domains of life. Biochem. Soc. Trans. 41, 314–320 (2013).
Huertas, P. DNA resection in eukaryotes: deciding how to fix the break. Nat. Struct. Mol. Biol. 17, 11–16 (2010).
Takahashi, T. S., Wigley, D. B. & Walter, J. C. Pumps, paradoxes and ploughshares: mechanism of the MCM2-7 DNA helicase. Trends Biochem. Sci. 30, 437–444 (2005).
Singleton, M. R., Dillingham, M. S., Gaudier, M., Kowalczykowski, S. C. & Wigley, D. B. Crystal structure of RecBCD enzyme reveals a machine for processing DNA breaks. Nature 432, 187–193 (2004).
Wallden, K. et al. Structure of the VirB4 ATPase, alone and bound to the core complex of a type IV secretion system. Proc. Natl Acad. Sci. USA 109, 11348–11353 (2012).
Abrahams, J. P., Leslie, A. G., Lutter, R. & Walker, J. E. Structure at 2.8 A resolution of F1-ATPase from bovine heart mitochondria. Nature 370, 621–628 (1994).
Story, R. M. & Steitz, T. A. Structure of the recA protein-ADP complex. Nature 355, 374–376 (1992).
Whelan, F. et al. A flexible brace maintains the assembly of a hexameric replicative helicase during DNA unwinding. Nucleic Acids Res. 40, 2271–2283 (2012).
Neuwald, A. F., Aravind, L., Spouge, J. L. & Koonin, E. V. AAA+: a class of chaperone-like ATPases associated with the assembly, operation, and disassembly of protein complexes. Genome Res. 9, 27–43 (1999).
Iyer, L. M., Leipe, D. D., Koonin, E. V. & Aravind, L. Evolutionary history and higher order classification of AAA+ ATPases. J. Struct. Biol. 146, 11–31 (2004).
Enemark, E. J. & Joshua-Tor, L. Mechanism of DNA translocation in a replicative hexameric helicase. Nature 442, 270–275 (2006).
de Paz, H. D. et al. Functional dissection of the conjugative coupling protein TrwB. J. Bacteriol. 192, 2655–2669 (2010).
Pena, A. et al. The hexameric structure of a conjugative VirB4 protein ATPase provides new insights for a functional and phylogenetic relationship with DNA translocases. J. Biol. Chem. 287, 39925–39932 (2012).
Massey, T. H., Mercogliano, C. P., Yates, J., Sherratt, D. J. & Lowe, J. Double-stranded DNA translocation: structure and mechanism of hexameric FtsK. Mol. Cell 23, 457–469 (2006).
Firman, K. & Szczelkun, M. D. Measuring motion on DNA by the type I restriction endonuclease EcoR124I using triplex displacement. EMBO J. 19, 2094–2102 (2000).
Kainov, D. E. et al. Structural basis of mechanochemical coupling in a hexameric molecular motor. J. Biol. Chem. 283, 3607–3617 (2008).
Thomsen, N. D. & Berger, J. M. Running in reverse: the structural basis for translocation polarity in hexameric helicases. Cell 139, 523–534 (2009).
Story, R. M., Weber, I. T. & Steitz, T. A. The structure of the E. coli recA protein monomer and polymer. Nature 355, 318–325 (1992).
Itsathitphaisarn, O., Wing, R. A., Eliason, W. K., Wang, J. & Steitz, T. A. The hexameric helicase DnaB adopts a nonplanar conformation during translocation. Cell 151, 267–277 (2012).
Singleton, M. R., Sawaya, M. R., Ellenberger, T. & Wigley, D. B. Crystal structure of T7 gene 4 ring helicase indicates a mechanism for sequential hydrolysis of nucleotides. Cell 101, 589–600 (2000).
Moreau, M. J., McGeoch, A. T., Lowe, A. R., Itzhaki, L. S. & Bell, S. D. ATPase site architecture and helicase mechanism of an archaeal MCM. Mol. Cell 28, 304–314 (2007).
Crampton, D. J., Mukherjee, S. & Richardson, C. C. DNA-induced switch from independent to sequential dTTP hydrolysis in the bacteriophage T7 DNA helicase. Mol. Cell 21, 165–174 (2006).
Casjens, S. R. The DNA-packaging nanomotor of tailed bacteriophages. Nat. Rev. Microbiol. 9, 647–657 (2011).
Hingorani, M. M. & O'Donnell, M. A tale of toroids in DNA metabolism. Nat. Rev. Mol. Cell Biol. 1, 22–30 (2000).
Sinha, K. M., Unciuleac, M. C., Glickman, M. S. & Shuman, S. AdnAB: a new DSB-resecting motor-nuclease from mycobacteria. Genes Dev. 23, 1423–1437 (2009).
Chedin, F. & Kowalczykowski, S. C. A novel family of regulated helicases/nucleases from Gram-positive bacteria: insights into the initiation of DNA recombination. Mol. Microbiol. 43, 823–834 (2002).
Lee, S. J. et al. Dynamic look at DNA unwinding by a replicative helicase. Proc. Natl Acad. Sci. USA 111, E827–E835 (2014).
Liao, J. C., Jeong, Y. J., Kim, D. E., Patel, S. S. & Oster, G. Mechanochemistry of t7 DNA helicase. J. Mol. Biol. 350, 452–475 (2005).
Lammens, K. et al. The Mre11:Rad50 structure shows an ATP-dependent molecular clamp in DNA double-strand break repair. Cell 145, 54–66 (2011).
Lim, H. S., Kim, J. S., Park, Y. B., Gwon, G. H. & Cho, Y. Crystal structure of the Mre11-Rad50-ATPgammaS complex: understanding the interplay between Mre11 and Rad50. Genes Dev. 25, 1091–1104 (2011).
Williams, G. J. et al. ABC ATPase signature helices in Rad50 link nucleotide state to Mre11 interface for DNA repair. Nat. Struct. Mol. Biol. 18, 423–431 (2011).
David, G. P. & J., Combined sampler robot and high-performance liquid chromatography: a fully automated system for biological small-angle X-ray scattering experiments at the Synchrotron SOLEIL SWING beamline. J. Appl. Cryst. 42, 892–900 (2009).
Petoukhov, M. V. et al. New developments in the ATSAS program package for small-angle scattering data analysis. J. Appl. Cryst. 45, 342–350 (2012).
Wriggers, W. Using Situs for the integration of multi-resolution structures. Biophys. Rev. 2, 21–27 (2010).
Pettersen, E. F. et al. UCSF Chimera--a visualization system for exploratory research and analysis. J. Comput. Chem. 25, 1605–1612 (2004).
Goddard, T. D., Huang, C. C. & Ferrin, T. E. Visualizing density maps with UCSF Chimera. J. Struct. Biol. 157, 281–287 (2007).
The PyMOL Molecular Graphics System, Version 1.5.0.4 Schrödinger, LLC.
Baker, N. A., Sept, D., Joseph, S., Holst, M. J. & McCammon, J. A. Electrostatics of nanosystems: application to microtubules and the ribosome. Proc. Natl Acad. Sci. USA 98, 10037–10041 (2001).
Dolinsky, T. J., Nielsen, J. E., McCammon, J. A. & Baker, N. A. PDB2PQR: an automated pipeline for the setup of Poisson-Boltzmann electrostatics calculations. Nucleic Acids Res. 32, W665–W667 (2004).
Acknowledgements
We would like to thank Meindert Lamers for help with collection and analysis of the SAXS data. We would also like to thank Owen Davies for advice with protein expression. The SAXS data collection was supported by funding from the European Community’s Seventh Framework Programme (FP7/2007–2013) under BioStruct-X (grant agreement no. 283570). Research in the N.P.R. laboratory is funded by the Medical Research Council (Career Development Award G0701443). Research in the L.P. laboratory is funded by a Wellcome Trust Senior Fellowship Award in Basic Biomedical Sciences (grant no. 08279/Z/07/Z). Work in the L.P. and N.P.R. laboratories is also supported by an Isaac Newton Trust Research Grant, and S.M.B. is supported by a BBSRC Doctoral Training Grant.
Author information
Authors and Affiliations
Contributions
N.J.R., L.P. and N.P.R. designed the study, analysed the data and wrote the manuscript. N.J.R., J.K.B., S.M.B., J.D.M. and N.P.R. collected and analysed the data.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Supplementary Information
Supplementary Figures 1-7, Supplementary Tables 1-2, Supplementary Methods and Supplementary References (PDF 1588 kb)
Rights and permissions
About this article
Cite this article
Rzechorzek, N., Blackwood, J., Bray, S. et al. Structure of the hexameric HerA ATPase reveals a mechanism of translocation-coupled DNA-end processing in archaea. Nat Commun 5, 5506 (2014). https://doi.org/10.1038/ncomms6506
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/ncomms6506
This article is cited by
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.