Abstract
Solar-driven, sorption-based atmospheric water harvesting (AWH) offers a cost-effective solution to freshwater scarcity in arid areas. Creating AWH devices capable of performing multiple adsorption–desorption cycles per day is crucial for increasing water production rates matching human water requirements. However, achieving rapid-cycling AWH in passive harvesters has been challenging due to sorbents’ slow water adsorption–desorption dynamics. Here we report an MOF-derived nanoporous carbon, a sorbent endowed with fast sorption kinetics and excellent photothermal properties, for high-yield AWH. The optimized structure (40% adsorption sites and ~1.0 nm pore size) has superior sorption kinetics due to the minimized diffusion resistance. Moreover, the carbonaceous sorbent exhibits fast desorption kinetics enabled by efficient solar-thermal heating and high thermal conductivity. A rapid-cycling water harvester based on nanoporous carbon derived from metal–organic frameworks can produce 0.18 L kgcarbon−1 h−1 of water at 30% relative humidity under one-sun illumination. The proposed design strategy is helpful to develop high-yield, solar-driven AWH for advanced freshwater-generation systems.
This is a preview of subscription content, access via your institution
Access options
Access Nature and 54 other Nature Portfolio journals
Get Nature+, our best-value online-access subscription
$29.99 / 30 days
cancel any time
Subscribe to this journal
Receive 12 print issues and online access
$259.00 per year
only $21.58 per issue
Buy this article
- Purchase on Springer Link
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
Data availability
The data that support the plots within this paper and other findings of this study are available from the corresponding authors upon reasonable request.
References
World Health Organization. Progress on Household Drinking Water, Sanitation and Hygiene 2000-2017: Special Focus on Inequalities (World Health Organization, 2019).
Hanikel, N., Prévot, M. S. & Yaghi, O. M. MOF water harvesters. Nat. Nanotechnol. 15, 348–355 (2020).
Lord, J. et al. Global potential for harvesting drinking water from air using solar energy. Nature 598, 611–617 (2021).
Hanikel, N. et al. Evolution of water structures in metal-organic frameworks for improved atmospheric water harvesting. Science 374, 454–459 (2021).
Kim, H. et al. Water harvesting from air with metal-organic frameworks powered by natural sunlight. Science 356, 430–434 (2017).
Ejeian, M. & Wang, R. Adsorption-based atmospheric water harvesting. Joule 5, 1678–1703 (2021).
Tu, Y., Wang, R., Zhang, Y. & Wang, J. Progress and expectation of atmospheric water harvesting. Joule 2, 1452–1475 (2018).
Xu, W. & Yaghi, O. M. Metal–organic frameworks for water harvesting from air, anywhere, anytime. ACS Cent. Sci. 6, 1348–1354 (2020).
LaPotin, A., Kim, H., Rao, S. R. & Wang, E. N. Adsorption-based atmospheric water harvesting: impact of material and component properties on system-level performance. Acc. Chem. Res. 52, 1588–1597 (2019).
Qi, H. et al. An interfacial solar-driven atmospheric water generator based on a liquid sorbent with simultaneous adsorption–desorption. Adv. Mater. 31, 1903378 (2019).
Wang, X. et al. An interfacial solar heating assisted liquid sorbent atmospheric water generator. Angew. Chem. Int. Ed. 58, 12054–12058 (2019).
Zhou, X., Lu, H., Zhao, F. & Yu, G. Atmospheric water harvesting: a review of material and structural designs. ACS Mater. Lett. 2, 671–684 (2020).
Kalmutzki, M. J., Diercks, C. S. & Yaghi, O. M. Metal–organic frameworks for water harvesting from air. Adv. Mater. 30, 1704304 (2018).
Fathieh, F. et al. Practical water production from desert air. Sci. Adv. 4, eaat3198 (2018).
Hanikel, N. et al. Rapid cycling and exceptional yield in a metal-organic framework water harvester. ACS Cent. Sci. 5, 1699–1706 (2019).
Anderson, R. J. et al. NMR methods for characterizing the pore structures and hydrogen storage properties of microporous carbons. J. Am. Chem. Soc. 132, 8618–8626 (2010).
Dillon, A. C. & Heben, M. J. Hydrogen storage using carbon adsorbents: past, present and future. Appl. Phys. A 72, 133–142 (2001).
Dang, S., Zhu, Q.-L. & Xu, Q. Nanomaterials derived from metal–organic frameworks. Nat. Rev. Mater. 3, 17075 (2017).
Bhadra, B. N., Lee, J. K., Cho, C. W. & Jhung, S. H. Remarkably efficient adsorbent for the removal of bisphenol A from water: Bio-MOF-1-derived porous carbon. Chem. Eng. J. 343, 225–234 (2018).
Hao, G.-P. et al. Unusual ultra-hydrophilic, porous carbon cuboids for atmospheric-water capture. Angew. Chem. Int. Ed. 54, 1941–1945 (2015).
Song, Y. et al. Nucleation and growth process of water adsorption in micropores of activated carbon revealed by NMR. J. Phys. Chem. C 121, 8504–8509 (2017).
Liu, L. et al. Water adsorption on carbon—a review. Adv. Colloid Interface Sci. 250, 64–78 (2017).
Humplik, T., Raj, R., Maroo, S. C., Laoui, T. & Wang, E. N. Effect of hydrophilic defects on water transport in MFI zeolites. Langmuir 30, 6446–6453 (2014).
Heinke, L. & Kärger, J. Correlating surface permeability with intracrystalline diffusivity in nanoporous solids. Phys. Rev. Lett. 106, 074501 (2011).
Wang, H.-J., Kleinhammes, A., McNicholas, T. P., Liu, J. & Wu, Y. Water adsorption in nanoporous carbon characterized by in situ NMR: measurements of pore size and pore size distribution. J. Phys. Chem. C 118, 8474–8480 (2014).
McNicholas, T. P. et al. H2 storage in microporous carbons from PEEK precursors. J. Phys. Chem. C 114, 13902–13908 (2010).
Ganguly, A., Sharma, S., Papakonstantinou, P. & Hamilton, J. Probing the thermal deoxygenation of graphene oxide using high-resolution in situ X-ray-based spectroscopies. J. Phys. Chem. C 115, 17009–17019 (2011).
Duan, X. et al. Metal-free carbon materials for CO2 electrochemical reduction. Adv. Mater. 29, 1701784 (2017).
Kaneko, K. Water capture in carbon cuboids. Nat. Chem. 7, 194–196 (2015).
Thommes, M. et al. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC technical report). Pure Appl. Chem. 87, 1051–1069 (2015).
Mao, H. et al. Revealing molecular mechanisms in hierarchical nanoporous carbon via nuclear magnetic resonance. Matter 3, 2093–2107 (2020).
Kloutse, F. A., Zacharia, R., Cossement, D. & Chahine, R. Specific heat capacities of MOF-5, Cu-BTC, Fe-BTC, MOF-177 and MIL-53 (Al) over wide temperature ranges: measurements and application of empirical group contribution method. Microporous Mesoporous Mater. 217, 1–5 (2015).
Mu, B. & Walton, K. S. Thermal analysis and heat capacity study of metal–organic frameworks. J. Phys. Chem. C 115, 22748–22754 (2011).
Qiu, L., Murashov, V. & White, M. A. Zeolite 4A: heat capacity and thermodynamic properties. Solid State Sci. 2, 841–846 (2000).
Haechler, I. et al. Exploiting radiative cooling for uninterrupted 24-hour water harvesting from the atmosphere. Sci. Adv. 7, eabf3978 (2021).
Wang, J. et al. Water harvesting from the atmosphere in arid areas with manganese dioxide. Environ. Sci. Technol. Lett. 7, 48–53 (2020).
Acknowledgements
We thank S. Liu (Wuhan National High Magnetic Field Center) for the NMR tests; L. Zheng, S. Bao and G. Wen (Nanjing University) for the water isotherm tests; and S. Yuan (Nanjing University) for the determination of the MOF structure. We also acknowledge the micro-fabrication centre of the National Laboratory of Solid State Microstructures (NLSSM) for their technical support. J.Z. acknowledges support from the XPLORER PRIZE. This work was jointly supported by the National Natural Science Foundation of China (nos. 61735008, 52003116, 52102262, 22005139, 12022403 and 51925204), National Key Research and Development Program of China (no. 2021YFA1400700), Natural Science Foundation of Jiangsu Province (no. BK20200340), Program for Innovative Talents and Entrepreneur in Jiangsu province, and Jiangsu Planned Projects for Postdoctoral Research Funds (no. 2020Z018). We are grateful to the High Performance Computing Center (HPCC) of Nanjing University for performing the numerical calculations involving the blade cluster system in this paper.
Author information
Authors and Affiliations
Contributions
Y.S., N.X. and J.Z. conceived and designed the project. Y.S., H.Q. and W.Z. performed the material preparation and characterization. G.L. performed the calculations. All the authors contributed to the writing of the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Nanotechnology thanks the anonymous reviewers for their contribution to the peer review of this work.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Supplementary Information
Supplementary Sections 1–19 and Figs. 1–20.
Rights and permissions
About this article
Cite this article
Song, Y., Xu, N., Liu, G. et al. High-yield solar-driven atmospheric water harvesting of metal–organic-framework-derived nanoporous carbon with fast-diffusion water channels. Nat. Nanotechnol. 17, 857–863 (2022). https://doi.org/10.1038/s41565-022-01135-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41565-022-01135-y
This article is cited by
-
Double-walled Al-based MOF with large microporous specific surface area for trace benzene adsorption
Nature Communications (2024)
-
Sustainable moisture energy
Nature Reviews Materials (2024)
-
Biomimetic surface engineering for sustainable water harvesting systems
Nature Water (2023)
-
MOF water harvester produces water from Death Valley desert air in ambient sunlight
Nature Water (2023)
-
Scalable and efficient solar-driven atmospheric water harvesting enabled by bidirectionally aligned and hierarchically structured nanocomposites
Nature Water (2023)