Abstract
The shear force along convergent plate boundary faults (megathrusts) determines the height of mountain ranges that can be mechanically sustained1,2,3,4. However, whether the true height of mountain ranges corresponds to this tectonically supported elevation is debated4,5,6,7. In particular, climate-dependent erosional processes are often assumed to exert a first-order control on mountain height5,6,7,8,9,10,11,12, although this assumption has remained difficult to validate12. Here we constrain the shear force along active megathrusts using their rheological properties and then determine the tectonically supported elevation using a force balance model. We show that the height of mountain ranges around the globe matches this elevation, irrespective of climatic conditions and the rate of erosion. This finding indicates that mountain ranges are close to force equilibrium and that their height is primarily controlled by the megathrust shear force. We conclude that temporal variations in mountain height reflect long-term changes in the force balance but are not indicative of a direct climate control on mountain elevation.
This is a preview of subscription content, access via your institution
Access options
Access Nature and 54 other Nature Portfolio journals
Get Nature+, our best-value online-access subscription
$29.99 / 30 days
cancel any time
Subscribe to this journal
Receive 51 print issues and online access
$199.00 per year
only $3.90 per issue
Buy this article
- Purchase on Springer Link
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
Data availability
All data used in this study are from the published literature as referenced14,15,16,17,18,47,55,56,57,58,59,60,61,62,63,64,65,66,67,68,69,70,71,72,73 in Extended Data Tables 1 and 2. The solutions of the rheological model and the force balance model are available at https://doi.org/10.5880/GFZ.4.1.2020.002.
Code availability
To create the maps in Extended Data Figs. 1–3, we used the Python package Matplotlib74 and MATLAB75. To create the swath profiles in Extended Data Figs. 6 and 7, we used TopoToolbox76. All force-balance calculations are based on the analytical expressions described in the Methods. The Python scripts used for the calculations of the shear force and the tectonically supported elevation are available from the corresponding author upon reasonable request.
Change history
08 July 2020
The online publication date in the printed version of this article was listed incorrectly as 10 June 2020; the date was correct online.
References
Husson, L. & Ricard, Y. Stress balance above subduction: application to the Andes. Earth Planet. Sci. Lett. 222, 1037–1050 (2004).
Wang, K. & He, J. Mechanics of low-stress forearcs: Nankai and Cascadia. J. Geophys. Res. 104, 15191–15205 (1999).
Lamb, S. Shear stresses on megathrusts: implications for mountain building behind subduction zones. J. Geophys. Res. 111, B07401 (2006).
Lamb, S. & Davis, P. Cenozoic climate change as a possible cause for the rise of the Andes. Nature 425, 792–797 (2003).
Champagnac, J. D., Molnar, P., Sue, C. & Herman, F. Tectonics, climate, and mountain topography. J. Geophys. Res. 117, B02403 (2012).
Brozović, N., Burbank, D. W. & Meigs, A. J. Climatic limits on landscape development in the northwestern Himalaya. Science 276, 571–574 (1997).
Egholm, D. L., Nielsen, S. B., Pedersen, V. K. & Lesemann, J.-E. Glacial effects limiting mountain height. Nature 460, 884–887 (2009).
Whipple, K. X. & Meade, B. J. Orogen response to changes in climatic and tectonic forcing. Earth Planet. Sci. Lett. 243, 218–228 (2006).
Roe, G. H., Stolar, D. B. & Willett, S. D. In Tectonics, Climate, and Landscape Evolution (eds Willett, S. D., Hovius, N., Brandon, M. T. & Fisher, D. M.) Vol. 398, 227–239 (Geological Society of America, 2006).
Willett, S. D. & Brandon, M. T. On steady states in mountain belts. Geology 30, 175–178 (2002).
Willett, S. D. Orogeny and orography: the effects of erosion on the structure of mountain belts. J. Geophys. Res. 104, 28,957–28,981 (1999).
Whipple, K. X. The influence of climate on the tectonic evolution of mountain belts. Nat. Geosci. 2, 97–104 (2009).
Gao, X. & Wang, K. Rheological separation of the megathrust seismogenic zone and episodic tremor and slip. Nature 543, 416–419 (2017).
Gao, X. & Wang, K. Strength of stick-slip and creeping subduction megathrusts from heat flow observations. Science 345, 1038–1041 (2014).
Dielforder, A. Constraining the strength of megathrusts from fault geometries and application to the Alpine collision zone. Earth Planet. Sci. Lett. 474, 49–58 (2017).
Wang, K., Hu, Y., von Huene, R. & Kukowski, N. Interplate earthquakes as a driver of shallow subduction erosion. Geology 38, 431–434 (2010).
Shimamoto, T. & Noda, H. A friction to flow constitutive law and its application to a 2-D modeling of earthquakes. J. Geophys. Res. 119, 8089–8106 (2014).
Hayes, G. P., Wald, D. J. & Johnson, R. L. Slab1.0: a three-dimensional model of global subduction zone geometries. J. Geophys. Res. 117, B01302 (2012).
Wallace, L. M. et al. Characterizing the seismogenic zone of a major plate boundary subduction thrust: Hikurangi Margin, New Zealand. Geochem. Geophys. Geosyst. 10, Q10006 (2009).
Wada, I. & Wang, K. Common depth of slab-mantle decoupling: reconciling diversity and uniformity of subduction zones. Geochem. Geophys. Geosyst. 10, Q10009 (2009).
Reuter, H. I., Nelson, A. & Jarvis, A. An evaluation of void filling interpolation methods for SRTM data. Int. J. Geogr. Inform. Sci. 21, 983–1008 (2007).
Montgomery, D. R., Balco, G. & Willett, S. D. Climate, tectonics, and the morphology of the Andes. Geology 29, 579–582 (2001).
Sobolev, S. V. & Babeyko, A. Y. What drives orogeny in the Andes? Geology 33, 617–620 (2005).
Luo, G. & Liu, M. Why short-term crustal shortening leads to mountain building in the Andes, but not in Cascadia? Geophys. Res. Lett. 36, L08301 (2009).
Oncken, O., Boutelier, D., Dresen, G. & Schemmann, K. Strain accumulation controls failure of plate boundary zone: linking deformation of the Central Andes and lithosphere mechanics. Geochem. Geophys. Geosyst. 13, Q12007 (2012).
Carrapa, B. & DeCelles, P. G. Regional exhumation and kinematic history of the central Andes in response to cyclical orogenic processes. In Geodynamics of a Cordilleran Orogenic System: The Central Andes of Argentina and Northern Chile (eds DeCelles, P. G., Ducea, M. N., Carrapa B. & Kapp, B. A.) Vol. 212 (Geological Society of America, 2015).
Strecker, M. et al. Tectonics and climate of the southern Central Andes. Annu. Rev. Earth Planet. Sci. 35, 747–787 (2007).
Bookhagen, B. & Burbank, D. W. Topography, relief, and TRMM-derived rainfall variations along the Himalaya. Geophys. Res. Lett. 33, L08405 (2006).
Horton, B. K. Erosional control on the geometry and kinematics of thrust belt development in the central Andes. Tectonics 18, 1292–1304 (1999).
McQuarrie, N., Ehlers, T. A., Barnes, J. B. & Meade, B. Temporal variation in climate and tectonic coupling in the central Andes. Geology 36, 999–1002 (2008).
Wang, K. et al. Stable forearc stressed by weak megathrust: mechanical and geodynamic implications of stress changes caused by the M = 9 Tohoku-Oki earthquake. J. Geophys. Res. 124, 6179–6194 (2019).
Hasegawa, A. et al. Change in stress field after the 2011 great Tohoku-Oki earthquake. Earth Planet. Sci. Lett. 355–356, 231–243 (2012).
Hardebeck, J. L. Coseismic and postseismic stress rotations due to great subduction zone earthquakes. Geophys. Res. Lett. 39, L21313 (2012).
Allmann, B. P. & Shearer, P. M. Global variations of stress drop for moderate to large earthquakes. J. Geophys. Res. 114, B01310 (2009).
Allmendinger, R. W. & González, G. Neogene to Quaternary tectonics of the coastal Cordillera, northern Chile. Tectonophysics 495, 93–110 (2010).
Wang, K. Stress–strain ‘paradox’, plate coupling, and forearc seismicity at the Cascadia and Nankai subduction zones. Tectonophysics 319, 321–338 (2000).
Molnar, P. & Lyon-Caen, H. In Processes in Continental Lithospheric Deformation (eds Clark, S. P. Jr, Burchfiel, B. C. & Suppe, J.) Vol. 218, 179–207 (Geological Society of America, 1988).
Schoenbohm, L. M. & Strecker, M. R. Normal faulting along the southern margin of the Puna Plateau, northwest Argentina. Tectonics 28, TC5008 (2009).
Byerlee, J. D. Friction of rocks. Pure Appl. Geophys. 116, 615–626 (1978).
Tesei, T., Lacroix, B. & Collettini, C. Fault strength in thin-skinned tectonic wedges across the smectite-illite transition: constraints from friction experiments and critical tapers. Geology 43, 923–926 (2015).
Ikari, M. J., Saffer, D. M. & Marone, C. Frictional and hydrologic properties of clay-rich fault gouge. J. Geophys. Res. 114, B05409 (2009).
Wesson, R. L. & Boyd, O. S. Stress before and after the 2002 Denali fault earthquake. Geophys. Res. Lett. 34, L07303 (2007).
Yoshida, K., Hasegawa, A., Okada, T. & Iinuma, T. Changes in the stress field after the 2008 M7.2 Iwate-Miyagi Nairiku earthquake in northeastern Japan. J. Geophys. Res. 119, 9016–9030 (2014).
Wobus, C., Heimsath, A., Whipple, K. & Hodges, K. Active out-of-sequence thrust faulting in the central Nepalese Himalaya. Nature 434, 1008–1011 (2005).
Berger, A. L. et al. Architecture, kinematics, and exhumation of a convergent orogenic wedge: a thermochronological investigation of tectonic-climatic interactions within the central St. Elias orogen, Alaska. Earth Planet. Sci. Lett. 270, 13–24 (2008).
Lamb, S. Did shortening in thick crust cause rapid Late Cenozoic uplift in the northern Bolivian Andes? J. Geol. Soc. Lond. 168, 1079–1092 (2011).
Nábělek, J. L. et al. Underplating in the Himalaya-Tibet Collision Zone revealed by the Hi-CLIMB experiment. Science 325, 1371–1374 (2009).
Gao, R. et al. Crustal-scale duplexing beneath the Yarlung Zangbo suture in the western Himalaya. Nat. Geosci. 9, 555–560 (2016).
Herman, F. et al. Exhumation, crustal deformation, and thermal structure of the Nepal Himalaya derived from the inversion of thermochronological and thermobarometric data and modeling of the topography. J. Geophys. Res. 115, B06407 (2010).
Wang, K. & Hu, Y. Accretionary prisms in subduction earthquake cycles: the theory of dynamic Coulomb wedge. J. Geophys. Res. 111, B06410 (2006).
Chapple, W. M. Mechanics of thin-skinned fold-and-thrust belts. Geol. Soc. Am. Bull. 89, 1189–1198 (1978).
Davis, D., Suppe, J. & Dahlen, F. A. Mechanics of fold-and-thrust belts and accretionary wedges. J. Geophys. Res. 88, 1153–1172 (1983).
Dahlen, F. A. Critical taper model of fold-and-thrust belts and accretionary wedges. Annu. Rev. Earth Planet. Sci. 18, 55–99 (1990).
Williams, C. A., Connors, C., Dahlen, F. A., Price, E. J. & Suppe, J. Effect of the brittle-ductile transition on the topography of compressive mountain belts on Earth and Venus. J. Geophys. Res. 99, 19,947–19,974 (1994).
Wang, K. & Tréhu, A. M. Some outstanding issues in the study of great megathrust earthquakes—the Cascadia example. J. Geodyn. 98, 1–18 (2016).
Hayes, G. P. et al. Slab2, a comprehensive subduction zone geometry model. Science 362, 58–61 (2018).
Sippl, C., Schurr, B., Asch, G. & Kummerow, J. Seismicity structure of the Northern Chile Forearc from >100,000 double-difference relocated hypocenters. J. Geophys. Res. 123, 4063–4087 (2018).
Rietbrock, A. et al. Aftershock seismicity of the 2010 Maule Mw=8.8, Chile, earthquake: correlation between co-seismic slip models and aftershock distribution? Geophys. Res. Lett. 39, L08310 (2012).
Hippchen, S. & Hyndman, R. D. Thermal and structural models of the Sumatra subduction zone: implications for the megathrust seismogenic zone. J. Geophys. Res. 113, B12103 (2008).
Klingelhoefer, F. et al. Limits of the seismogenic zone in the epicentral region of the 26 December 2004 great Sumatra-Andaman earthquake: results from seismic refraction and wide-angle reflection surveys and thermal modeling. J. Geophys. Res. 115, B01304 (2010).
Heuret, A., Lallemand, S., Funiciello, F., Piromallo, C. & Faccenna, C. Physical characteristics of subduction interface type seismogenic zones revisited. Geochem. Geophys. Geosyst. 12, Q01004 (2011).
Williams, C. A. et al. Revised interface geometry for the Hikurangi subduction zone, New Zealand. Seismol. Res. Lett. 84, 1066–1073 (2013).
Ader, T. et al. Convergence rate across the Nepal Himalaya and interseismic coupling on the Main Himalayan Thrust: implications for seismic hazard. J. Geophys. Res. 117, B04403 (2012).
Elliott, J. R. et al. Himalayan megathrust geometry and relation to topography revealed by the Gorkha earthquake. Nat. Geosci. 9, 174–180 (2016).
Stevens, V. L. & Avouac, J. P. Interseismic coupling on the main Himalayan thrust. Geophys. Res. Lett. 42, 5828–5837 (2015).
Ramachandran, K., Hyndman, R. D. & Brocher, T. M. Regional P wave velocity structure of the Northern Cascadia Subduction Zone. J. Geophys. Res. 111, B12301 (2006).
Bostock, M. G., Hyndman, R. D., Rondenay, S. & Peacock, S. M. An inverted continental Moho and serpentinization of the forearc mantle. Nature 417, 536–538 (2002).
Oncken, O. et al. Seismic imaging of a convergent continental margin and plateau in the central Andes (Andean Continental Research Project 1996 (ANCORP’96)). J. Geophys. Res. 108, 2328 (2003).
Tassara, A., Götze, H.-J., Schmidt, S. & Hackney, R. Three-dimensional density model of the Nazca plate and the Andean continental margin. J. Geophys. Res. 111, B09404 (2006).
Simoes, M., Avouac, J. P., Cattin, R. & Henry, P. The Sumatra subduction zone: a case for a locked fault zone extending into the mantle. J. Geophys. Res. 109, B10402 (2004).
Iwasaki, T., Levin, V., Nikulin, A. & Iidaka, T. Constraints on the Moho in Japan and Kamchatka. Tectonophysics 609, 184–201 (2013).
Katsumata, A. Depth of the Moho discontinuity beneath the Japanese islands estimated by traveltime analysis. J. Geophys. Res. 115, B04303 (2010).
Salmon, M., Kennett, B. L. N., Stern, T. & Aitken, A. R. A. The Moho in Australia and New Zealand. Tectonophysics 609, 288–298 (2013).
Hunter, J. D. Matplotlib: a 2D graphics environment. Comput. Sci. Eng. 9, 90–95 (2007).
MATLAB and Statistics Toolbox Release (The MathWorks, 2012).
Schwanghart, W. & Scherler, D. TopoToolbox 2 – MATLAB-based software for topographic analysis and modeling in Earth surface sciences. Earth Surf. Dyn. 2, 1–7 (2014).
Heidbach, O., Rajabi, M., Reiter, K., Ziegler, M. & Team, W. S. M. World Stress Map Database Release 2016 https://doi.org/10.5880/WSM.2016.001 (2016).
Amante, C. & Eakins, B. W. ETOPO1 1 Arc-Minute Global Relief Model NOAA Technical Memorandum https://doi.org/10.7289/V5C8276M (National Centers for Environmental Information, 2009).
Acknowledgements
We thank S. Brune, A. Hampel and R. Danisi for comments on earlier versions of the manuscript.
Author information
Authors and Affiliations
Contributions
A.D. designed the study, compiled the data and conducted the force analysis. All authors discussed and analysed the results. A.D. and R.H. wrote the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Peer review information Nature thanks Barbara Carrapa, Kelin Wang and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Extended data figures and tables
Extended Data Fig. 1 Map with the localities of the convergent margin segments studied.
Red and blue circles indicate margins where the frictional strength of the megathrust has been derived from heat dissipation models and from Coulomb wedge models, respectively. 1, Northern Cascadia; 2, 3 and 4, The Andes at 23° S, 34° S, and 36° S, respectively; 5, Northern Sumatra; 6, Kamchatka; 7, Japan Trench; 8, Nankai Trough; 9, Northern Hikurangi; 10, Himalayas. Maps of the study sites are shown in Extended Data Figs. 2 and 3.
Extended Data Fig. 2 Map view of the convergent margin segments studied.
a–f, Thick black lines and black rectangles indicate the trace and width (100 km), respectively, of the swath profiles shown in Extended Data Figs. 6 and 7. Small red, yellow, and blue circles are continental earthquakes with normal faulting, strike-slip and thrust faulting focal mechanisms, respectively77. Lines associated with symbols indicate the orientation of the maximum horizontal compressional stress.
Extended Data Fig. 3 Map view of the convergent margin segments studied.
a–c, Thick black lines and black rectangles indicate the trace and width (100 km), respectively, of the swath profile shown in Extended Data Fig. 7. Small red, yellow, and blue circles are continental earthquakes with normal faulting, strike-slip, and thrust faulting focal mechanisms, respectively77. Lines associated with symbols indicate the orientation of the maximum horizontal compressional stress.
Extended Data Fig. 4 Coulomb wedge model for the Andean outer wedge at 23° S.
The model is constrained by the wedge geometry (surface slope α and basal dip angle β), the coefficient of friction of the wedge material μw (0.45), and the pore fluid pressure ratio in the wedge λ (see refs. 15,16,50 for details). The open circle indicates the ideal state of basal erosion, which is given by the intersection of the compressively critical strength envelope with the straight line that represents all principal solutions for which the effective strength of the megathrust is equal to the effective strength of the wedge (μ′ = μw(1 − λ)). Basal erosion occurs during coseismic strengthening of the shallow megathrust beneath the outer wedge and constrains the dynamic strength of the fault during great earthquakes16. The average interseismic strength of the megathrust (solid circle) used for the calculation of the megathrust shear force is taken to be lower by 0.01 than the dynamic strength (open circle) of the megathrust during coseismic strengthening of the shallow megathrust.
Extended Data Fig. 5 Analytical force balance model.
a, b, Schematic illustration of the force balance model for subduction and collision zones, respectively. Fs is the shear force along the megathrust and Fg is the gravitational force. \(\bar{\rho }\) is the average density of the triangular wedge above the megathrust. P is the push of the upper plate. L is the downdip extent of the megathrust. dT is the trench depth and γ is the surface slope of the submarine part of the wedge. See Methods and refs. 2,3 for details.
Extended Data Fig. 6 Topographic swath profiles.
a–e, Mean elevation (red line) ± 1 standard deviation (grey). Width of the swath profiles is 100 km. The submarine topography and subaerial topography were obtained from the ETOPO1 global relief model78 and the SRTM 90-m digital elevation model21, respectively. To calculate the MME, we first identified the maximum value of the mean elevation along each swath. We then averaged the elevation over the area (black bars) in which the elevation is within 95% of this maximum value. The uncertainty represents one standard deviation of the mean elevation within that area. Dashed horizontal lines indicate sea level. Vertical arrows indicate the position of the trench at subduction zones. Vertical exaggeration is 10.
Extended Data Fig. 7 Topographic swath profiles.
a–e, Mean elevation (red line) ± 1 standard deviation (grey). Width of the swath profiles is 100 km. The submarine topography and subaerial topography were obtained from the ETOPO1 global relief model78 and the SRTM 90-m digital elevation model21, respectively. To calculate the MME, we first identified the maximum value of the mean elevation along each swath. We then averaged the elevation over the area (black bars) in which the elevation is within 95% of this maximum value. The uncertainty represents one standard deviation of the mean elevation within that area. Dashed horizontal lines indicate sea level. Vertical arrows indicate the position of the trench at subduction zones and the position of the Main Frontal Thrust for the Himalayas. Vertical exaggeration is 10.
Rights and permissions
About this article
Cite this article
Dielforder, A., Hetzel, R. & Oncken, O. Megathrust shear force controls mountain height at convergent plate margins. Nature 582, 225–229 (2020). https://doi.org/10.1038/s41586-020-2340-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41586-020-2340-7
This article is cited by
-
Seismological evidence for a multifault network at the subduction interface
Nature (2024)
-
Calabrian forearc uplift paced by slab–mantle interactions during subduction retreat
Nature Geoscience (2023)
-
Fault strength and rupture process controlled by fault surface topography
Nature Geoscience (2023)
-
Contribution of background seismicity to forearc uplift
Nature Geoscience (2021)
-
The impact of glaciers on mountain erosion
Nature Reviews Earth & Environment (2021)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.