Abstract
The antineoplastic drug carmofur is shown to inhibit the SARS-CoV-2 main protease (Mpro). Here, the X-ray crystal structure of Mpro in complex with carmofur reveals that the carbonyl reactive group of carmofur is covalently bound to catalytic Cys145, whereas its fatty acid tail occupies the hydrophobic S2 subsite. Carmofur inhibits viral replication in cells (EC50 = 24.30 μM) and is a promising lead compound to develop new antiviral treatment for COVID-19.
Similar content being viewed by others
Main
COVID-19, a highly infectious viral disease caused by coronavirus SARS-CoV-2, has spread worldwide since its appearance in December 2019, causing an unprecedented pandemic. The number of confirmed cases worldwide continues to grow at a rapid rate, but, at this time, there are no specific drugs or vaccines available to control the symptoms or the spread of this disease.
SARS-CoV-2 has an ~30,000 nt RNA genome. The first open reading frame encodes two translational products, polyproteins 1a and 1ab (pp1a and pp1ab)1,2, which are processed into mature non-structural proteins by the main protease (Mpro) and a papain-like protease3. Mpro has been proposed as a therapeutic target for anti-coronavirus drug development4,5,6. We previously screened over 10,000 compounds and identified carmofur as a compound that can inhibit Mpro in vitro, with a half-maximum inhibitory concentration (IC50) of 1.82 μM (ref. 7).
Carmofur (1-hexylcarbamoyl-5-fluorouracil) is a derivative of 5-fluorouracil (5-FU; Fig. 1a) and an approved antineoplastic agent. Carmofur has been used to treat colorectal cancer since the 1980s8 and has shown clinical benefits for breast, gastric and bladder cancers9,10,11. The target for carmofur is believed to be thymidylate synthase12,13, but it has also been shown to inhibit human acid ceramidase (AC)14 through covalent modification of its catalytic cysteine15.
The molecular details of how carmofur inhibits Mpro activity have remained unresolved. Here, we now present a 1.6 Å X-ray crystal structure of SARS-CoV-2 Mpro in complex with carmofur (Fig. 1b,c and Supplementary Table 1). In agreement with previous studies4,5,16,17,18, Mpro forms a homodimer (protomers A and B) related by crystallographic symmetry (Extended Data Fig. 1a,b). All of the residues (1–306) in the polypeptide can be traced in the electron density map. Each protomer is composed of three domains (Fig. 1c)—domains I (residues 10–99), II (residues 100–184) and III (residues 201–303)—and a long loop region (residues 185–200) that connects domains II and III. The substrate-binding pocket lies in the cleft between domains I and II, and features the catalytic dyad residues Cys145 and His41 (Fig. 1c,d). The substrate-binding pocket is divided into a series of subsites (including S1, S2, S4 and S1′), each accommodating a single but consecutive amino acid residue in the substrate. Ser1 in each one protomer interacts with Phe140 and Glu166 of the other protomer to stabilize the S1 subsite (Extended Data Fig. 1c), a structural feature that is essential for catalysis7.
The electron density map unambiguously shows that the fatty acid moiety (C7H14NO) of carmofur is linked to the Sγ atom of Cys145 through a 1.8 Å covalent bond, whereas the fatty acid tail is inserted into the S2 subsite (Fig. 1d,e). This observation suggests that the sulfhydryl group of Cys145 attacks the electrophilic carbonyl group of carmofur, resulting in covalent modification of Cys145 and release of the 5-FU moiety (Fig. 1b and Extended Data Fig. 2a). In addition to the C-S covalent bond, the inhibitor is stabilized by numerous hydrogen bonds and hydrophobic interactions (Fig. 1e and Extended Data Fig. 2b). The carbonyl oxygen of carmofur occupies the oxyanion hole and forms hydrogen bonds (3.0 Å) with the backbone amides of Gly143 and Cys145, mimicking the tetrahedral oxyanion intermediate formed during protease cleavage (Fig. 1e). The fatty acid tail, which appears in an extended conformation, inserts into the bulky hydrophobic S2 subsite (composed of the side chains of His41, Met49, Tyr54 and Met165 and the alkyl portion of the side chain of Asp187; Fig. 1d,e). The hydrophobic interactions are mainly contributed by the side chains of His41, Met49 and Met165, all of which run parallel to the alkyl part of the fatty acid tail of the inhibitor (Fig. 1e and Extended Data Fig. 2b).
The mechanism of covalent modification by carmofur is different from that of the inhibitor N37,19, which covalently modifies Cys145 through Michael addition of the vinyl group. The structures of Mpro–carmofur and Mpro–N3 are similar overall (r.m.s. deviation (r.m.s.d.) of 0.286 Å for all Cα atoms). The largest conformational differences occur in the substrate-binding pocket, with the backbone surrounding carmofur in a slightly more outward position compared with the Mpro–N3 complex structure (Extended Data Fig. 3a). Another difference is that carmofur only occupies the S2 subsite (Fig. 1d), whereas N3 occupies four subsites (S1, S2, S4 and S1′; Extended Data Fig. 3b,c). The lactam ring of N3 is located in the S1 subsite, which is filled by a DMSO molecule in the Mpro–carmofur structure (Extended Data Fig. 3b,c). These observations demonstrate the potential for structural elaboration of carmofur and will be useful for the design of more potent derivatives against the Mpro of SARS-CoV-2.
We previously showed that treatment with 10 μM ebselen (half-maximum effective concentration, EC50 = 4.67 μM) inhibited infection of Vero cells with SARS-CoV-2, whereas carmofur did not show detectable antiviral activity at this concentration7. Here, we have determined the inhibitory effect of carmofur against SARS-CoV-2 infection on Vero E6 cells, as previously described in ref. 20 (Fig. 2). By measuring viral RNA in the cellular supernatant, we determined the EC50 value for carmofur as 24.30 μM (Fig. 2a). To verify this result, we fixed infected cells and stained them using anti-sera against viral nucleocapsid protein (NP), observing a decrease in NP levels after carmofur treatment (Fig. 2b). We also performed cytotoxicity assays for carmofur in Vero E6 cells and determined a half-maximum cytotoxic concentration (CC50) value of 133.4 μM (Fig. 2c). Thus, carmofur has a favorable selectivity index (SI) of 5.36, but further optimization will be required to develop an effective drug.
In conclusion, the crystal structure of Mpro in complex with carmofur shows that the compound directly modifies the catalytic Cys145 of SARS-CoV-2 Mpro. Our study also provides a basis for rational design of carmofur analogs with enhanced inhibitory efficacy to treat COVID-19. Because Mpro is highly conserved among all coronaviruses, carmofur and its analogs may be effective against a broader spectrum of these viruses.
Methods
Cloning, protein expression and purification of SARS-CoV-2 Mpro
The cell cultures were grown and the protein expressed according to the method in ref. 7. The cell pellets were resuspended in lysis buffer (20 mM Tris-HCl pH 8.0, 150 mM NaCl, 5% glycerol), lysed by high-pressure homogenization and then centrifuged at 25,000g for 30 min. The supernatant was loaded onto a Ni-NTA affinity column (Qiagen) and washed in lysis buffer containing 20 mM imidazole. The His-tagged Mpro was eluted by lysis buffer that included 300 mM imidazole. The imidazole was then removed through desalting. Human rhinovirus 3C protease was added to remove the C-terminal His tag. The SARS-CoV-2 Mpro was further purified by ion exchange chromatography, then the purified Mpro was transferred to 10 mM Tris-HCl pH 8.0 by desalting and stored at −80 °C until needed.
Crystallization, data collection and structure determination
SARS-CoV-2 Mpro was concentrated to 5 mg ml−1, incubated with 0.3 mM carmofur (Selleck) for 1 h, then the complex was crystallized by the hanging drop vapor diffusion method at 20 °C. The best crystals were grown using a well buffer containing 0.1 M MES pH 6.0, 5% polyethylene glycol 6000 and 3% DMSO. The cryo-protectant solution was the reservoir but with 20% glycerol added.
X-ray data were collected on beamline BL17U1 at Shanghai Synchrotron Radiation Facility (SSRF) at 100 K and at a wavelength of 0.97918 Å using an Eiger X 16M image plate detector. Data integration and scaling were performed using the program XDS21. The structure was determined by molecular replacement (MR) with PHASER22 and Phenix 1.17.123 using SARS-CoV-2 Mpro (PDB ID 6LU7) as a search template. The model from MR was subsequently subjected to iterative cycles of manual model adjustment with Coot 0.824, and refinement was completed with Phenix REFINE25. The inhibitor, carmofur, was built according to the omit map. The phasing and refinement statistics are summarized in Supplementary Table 1.
Antiviral and cytotoxicity assays for carmofur
A clinical isolate of SARS-CoV-2 (nCoV-2019BetaCoV/Wuhan/WIV04/2019) was propagated in Vero E6 cells, and the viral titer was determined as described previously20. Vero E6 cells were obtained from ATCC with authentication. Authentication was performed by a morphology check under a microscope and growth curve analysis. All cells were tested as mycoplasma-negative. For the antiviral assay, pre-seeded Vero E6 cells (5 × 104 cells per well) were pre-treated with different concentrations of carmofur for 1 h and the virus was subsequently added (MOI of 0.05) to allow infection for 1 h. Next, the virus-drug mixture was removed and the cells were further cultured with fresh drug-containing medium. At 24 h post-infection, the cell supernatant was collected and vRNA in supernatant was subjected to qRT-PCR analysis, while cells were fixed and subjected to immunofluorescence to monitor intracellular NP level as described previously20. For cytotoxicity assays, Vero E6 cells were suspended in growth medium in 96-well plates. The next day, appropriate concentrations of carmofur were added to the medium. After 24 h, the relative numbers of surviving cells were measured using a Cell Counting Kit-8 (CCK8, Beyotime) assay in accordance with the manufacturer’s instructions. All experiments were performed in triplicate, and all the infection experiments were performed at biosafety level 3 (BSL-3).
Reporting Summary
Further information on research design is available in the Nature Research Reporting Summary linked to this article.
References
Wu, F. et al. A new coronavirus associated with human respiratory disease in China. Nature 579, 265–269 (2020).
Zhou, P. et al. A pneumonia outbreak associated with a new coronavirus of probable bat origin. Nature 579, 270–273 (2020).
Hegyi, A. & Ziebuhr, J. Conservation of substrate specificities among coronavirus main proteases. J. Gen. Virol. 83, 595–599 (2002).
Anand, K. et al. Structure of coronavirus main proteinase reveals combination of a chymotrypsin fold with an extra α-helical domain. EMBO J. 21, 3213–3224 (2002).
Yang, H. et al. The crystal structures of severe acute respiratory syndrome virus main protease and its complex with an inhibitor. Proc. Natl Acad. Sci. USA 100, 13190–13195 (2003).
Pillaiyar, T., Manickam, M., Namasivayam, V., Hayashi, Y. & Jung, S. H. An overview of severe acute respiratory syndrome-coronavirus (SARS-CoV) 3CL protease inhibitors: peptidomimetics and small molecule chemotherapy. J. Med. Chem. 59, 6595–6628 (2016).
Jin, Z. et al. Structure of Mpro from COVID-19 virus and discovery of its inhibitors. Nature https://doi.org/10.1038/s41586-020-2223-y (2020).
Sakamoto, J. et al. An individual patient data meta-analysis of adjuvant therapy with carmofur in patients with curatively resected colon cancer. Jpn J. Clin. Oncol. 35, 536–544 (2005).
Morimoto, K. & Koh, M. Postoperative adjuvant use of carmofur for early breast cancer. Osaka City Med. J. 49, 77–83 (2003).
Gröhn, P. et al. Oral carmofur in advanced gastrointestinal cancer. Am. J. Clin. Oncol. 13, 477–479 (1990).
Nishio, S. et al. Study on effectiveness of carmofur (Mifurol) in urogenital carcinoma, especially bladder cancer, as a post-operative adjuvant chemotherapeutic agent. Hinyokika Kiyo 33, 295–303 (1987).
Ooi, A. et al. Plasma, intestine and tumor levels of 5-fluorouracil in mice bearing L1210 ascites tumor following oral administration of 5-fluorouracil, UFT (mixed compound of tegafur and uracil), carmofur and 5′-deoxy-5-fluorouridine. Biol. Pharm. Bull. 24, 1329–1331 (2001).
Sato, S., Ueyama, T., Fukui, H., Miyazaki, K. & Kuwano, M. Anti-tumor effects of carmofur on human 5-FU resistant cells. Gan To Kagaku Ryoho 26, 1613–1616 (1999).
Nguyen, H. S., Awad, A. J., Shabani, S. & Doan, N. Molecular targeting of acid ceramidase in glioblastoma: a review of its role, potential treatment and challenges. Pharmaceutics 10, E45 (2018).
Dementiev, A. et al. Molecular mechanism of inhibition of acid ceramidase by carmofur. J. Med. Chem. 62, 987–992 (2019).
Xue, X. et al. Structures of two coronavirus main proteases: implications for substrate binding and antiviral drug design. J. Virol. 82, 2515–2527 (2008).
Ren, Z. et al. The newly emerged SARS-like coronavirus HCoV-EMC also has an ‘Achilles’ heel’: current effective inhibitor targeting a 3C-like protease. Protein Cell 4, 248–250 (2013).
Wang, F., Chen, C., Tan, W., Yang, K. & Yang, H. Structure of main protease from human coronavirus NL63: insights for wide spectrum anti-coronavirus drug design. Sci. Rep. 6, 22677 (2016).
Yang, H. et al. Design of wide-spectrum inhibitors targeting coronavirus main proteases. PLoS Biol. 3, e324 (2005).
Wang, M. et al. Remdesivir and chloroquine effectively inhibit the recently emerged novel coronavirus (2019-nCoV) in vitro. Cell Res. 30, 269–271 (2020).
Kabsch, W. XDS. Acta Crystallogr. D Biol. Crystallogr. 66, 125–132 (2010).
McCoy, A. J. et al. Phaser crystallographic software. J. Appl. Crystallogr. 40, 658–674 (2007).
Liebschner, D. et al. Macromolecular structure determination using X-rays, neutrons and electrons: recent developments in Phenix. Acta Crystallogr. D Struct. Biol. 75, 861–877 (2019).
Emsley, P., Lohkamp, B., Scott, W. G. & Cowtan, K. Features and development of Coot. Acta Crystallogr. D Biol. Crystallogr. 66, 486–501 (2010).
Afonine, P. V. et al. Towards automated crystallographic structure refinement with phenix.refine. Acta Crystallogr. D Biol. Crystallogr. 68, 352–367 (2012).
Acknowledgements
We are grateful to the staff at beamlines BL17U1, BL18U1 and BL19U1 at Shanghai Synchrotron Radiation Facility (SSRF, China), where data were collected. This work was supported by grants from the National Key R&D Program of China (grant no. 2017YFC0840300 to Z.R. and 2020YFA0707500.), the Project of International Cooperation and Exchanges NSFC (grant no. 81520108019 to Z.R.), the Science and Technology Commission of Shanghai Municipality (grant no. 20431900200), the Department of Science and Technology of Guangxi Zhuang Autonomous Region (grant no. 2020AB40007) and the Natural Science Foundation of China (grant no. 31970165).
Author information
Authors and Affiliations
Contributions
H.Y. and Z.R. conceived the project. Z.J., Y. Zhao, H.Y. and Z.R. designed the experiments. Z.J., Y. Zhao, H.W., Y. Zhu, C.Z., X.D., J.Y. and Xiuna Yang cloned, expressed, purified and crystallized proteins. Y. Zhao, Z.J., B.Z. and T.H. collected the diffraction data. Y. Zhao, B.Z. and X.L. solved the crystal structure. Y.S. and Y.W. performed cell-based antiviral and cytotoxicity assays. Y.D. and L.Z. performed qRT-PCR and cytotoxicity assay analysis. Y. Zhao, Z.J., Y.D., Xiaobao Yang, K.Y., X.L., L.W.G., G.X., L.Z., H.Y. and Z.R. analyzed and discussed the data. Y. Zhao, Z.J., K.Y., L.W.G., L.Z., H.Y. and Z.R. wrote the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Peer review information Inês Chen was the primary editor on this article and managed its editorial process and peer review in collaboration with the rest of the editorial team.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Extended data
Extended Data Fig. 1 Overall structure of SARS-CoV-2 Mpro in complex with carmofur.
a, The overall structure of SARS-CoV-2 Mpro in complex with carmofur. The salmon and green represent the different protomers. The carmofur atoms are shown as solid spheres. b, The side view of the complex. c, The first serine participate in the formation of the dimer.
Extended Data Fig. 2 Inhibition of Mpro by carmofur.
a, Putative inhibition mechanism. Red curve represents Mpro polypeptide and the black sphere represent the Cα of C145. b, Schematic diagram of Mpro-carmofur interactions. Black spheres represent Cα atoms.
Extended Data Fig. 3 Binding mode of carmofur and N3 to Mpro.
a, Overall structural comparison between the Mpro-carmofur and Mpro-N3 complexes. The salmon cartoon represents the carmofur bound structure and the light cyan represents the N3 bound structure. Carmofur, N3 and DMSO are represented by the purple, yellow and green balls and sticks, respectively. b, The binding pocket of Mpro. Carmofur and N3 are represent in the same way as in panel a. c, Schematic diagram of carmofur and N3.
Supplementary information
Supplementary Information
Supplementary Table 1.
Source data
Source Data Fig. 2
Statistical source data.
Rights and permissions
About this article
Cite this article
Jin, Z., Zhao, Y., Sun, Y. et al. Structural basis for the inhibition of SARS-CoV-2 main protease by antineoplastic drug carmofur. Nat Struct Mol Biol 27, 529–532 (2020). https://doi.org/10.1038/s41594-020-0440-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41594-020-0440-6