The phenomenal rate of increase in the integration density of silicon chips has been sustained in large part by advances in optical lithography — the process that patterns and guides the fabrication of the component semiconductor devices and circuitry. Although the introduction of shorter-wavelength light sources and resolution-enhancement techniques should help maintain the current rate of device miniaturization for several more years, a point will be reached where optical lithography can no longer attain the required feature sizes. Several alternative lithographic techniques under development have the capability to overcome these resolution limits but, at present, no obvious successor to optical lithography has emerged.
This is a preview of subscription content, access via your institution
Access options
Subscribe to this journal
Receive 51 print issues and online access
$199.00 per year
only $3.90 per issue
Buy this article
- Purchase on Springer Link
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
References
International Technology Roadmap for Semiconductors (ed. International SEMATECH) 〈http://www.itrs.net/ntrs/publntrs.nsf 〉 (1999).
Klein, M. V. Optics (Wiley, New York, 1970).
Okazaki, S. Resolution limits of optical lithography. J. Vac. Sci. Technol. B 9, 2829–2833 ( 1991).
Levenson, M. D. et al. Improving resolution in photolithography with a phase-shifting mask. IEEE Trans. Electron Devices 29, 1828 –1836 (1982).
Terasawa, T. et al. 0.3 μm optical lithography using a phase shifting mask . Proc. SPIE 1088, 25–33 (1989).
Matsuo, K. et al. High resolution optical lithography system using oblique incidence illumination. Technol. Digest IEDM 91, 70 –972 (1991).
Nakayama, Y. et al. Electron-beam cell projection lithography: a new high throughput electron direct-writing technology using a tailored Si aperture. J. Vac. Sci. Technol. B 8, 1836 ( 1990).
Berger, S. D. et al. Projection electron beam lithography: a new approach. J. Vac. Sci. Technol. B 9, 2996–2999 (1991).
Pfeiffer, H. C. & Stickel, W. PRIVAIL—an E-beam stepper with variable axis immersion lenses. Microelectron. Eng. 27, 143–146 ( 1995).
Deguchi, K. et al. Pattering characteristics of a chemically-amplified negative resist in synchrotron radiation lithography. Jpn. J. Appl. Phys. 31, 2954–2958 ( 1992).
Kinoshita, H. et al. Soft X-ray reduction lithography using multilayer mirrors . J. Vac. Sci. Technol. B 7, 1648– 1651 (1989).
Bjorkholm, J. E. et al. Reduction imaging at 14 nm using multilayer-coated optics: printing of features smaller than 0.1 μm. J. Vac. Sci. Technol. B 8, 1509 (1990).
Oizumi, H. et al. Sub-50 nm patterning in EUV lithography. Jpn. J. Appl. Phys. (in the press).
Kubiak, G. D. et al. High power extreme-ultraviolet source based on gas jets. Proc. SPIE 3331, 81–89 ( 1998).
Silfvast, W. T. et al. High power plasma discharge source at 13.5 nm and 11.4 nm for EUV lithography. Proc. SPIE 3676, 272 (1999).
Acknowledgements
A part of this work is supported by New Energy and Industrial Technology Development Organization (NEDO).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ito, T., Okazaki, S. Pushing the limits of lithography. Nature 406, 1027–1031 (2000). https://doi.org/10.1038/35023233
Issue Date:
DOI: https://doi.org/10.1038/35023233
This article is cited by
-
Transistor engineering based on 2D materials in the post-silicon era
Nature Reviews Electrical Engineering (2024)
-
Two-dimensional directed lamellar assembly in silicon- and fluorine-containing block copolymer with identical surface energies
NPG Asia Materials (2023)
-
Self-organized patterning on azo molecular glass film via optical near-field effect
Communications Materials (2023)
-
Enhancement of pattern quality in maskless plasmonic lithography via spatial loss modulation
Microsystems & Nanoengineering (2023)
-
Effects of Hollow–Gaussian beams on Fresnel diffraction by an opaque disk
Optical and Quantum Electronics (2023)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.