Abstract
Solar cells based on inorganic absorbers, such as Si, GaAs, CdTe and Cu(In,Ga)Se2, permit a high device efficiency and stability. The crystals’ three-dimensional structure means that dangling bonds inevitably exist at the grain boundaries (GBs), which significantly degrades the device performance via recombination losses. Thus, the growth of single-crystalline materials or the passivation of defects at the GBs is required to address this problem, which introduces an added processing complexity and cost. Here we report that antimony selenide (Sb2Se3)—a simple, non-toxic and low-cost material with an optimal solar bandgap of ∼1.1 eV—exhibits intrinsically benign GBs because of its one-dimensional crystal structure. Using a simple and fast (∼1 μm min–1) rapid thermal evaporation process, we oriented crystal growth perpendicular to the substrate, and produced Sb2Se3 thin-film solar cells with a certified device efficiency of 5.6%. Our results suggest that the family of one-dimensional crystals, including Sb2Se3, SbSeI and Bi2S3, show promise in photovoltaic applications.
This is a preview of subscription content, access via your institution
Access options
Subscribe to this journal
Receive 12 print issues and online access
$209.00 per year
only $17.42 per issue
Buy this article
- Purchase on Springer Link
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
References
Wang, W. et al. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency. Adv. Energy Mater. 4, 1301465 (2014).
Jeon, N. J. et al. Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells. Nature Mater. 13, 897–903 (2014).
Chen, S., Walsh, A., Gong, X. G. & Wei, S. H. Classification of lattice defects in the kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 earth-abundant solar cell absorbers. Adv. Mater. 25, 1522–1539 (2013).
Barkhouse, D. A. R., Gunawan, O., Gokmen, T., Todorov, T. K. & Mitzi, D. B. Device characteristics of a 10.1% hydrazine-processed Cu2ZnSn(Se,S)4 solar cell. Prog. Photovolt. 20, 6–11 (2012).
Gratzel, M. The light and shade of perovskite solar cells. Nature Mater. 13, 838–842 (2014).
Kranz, L. et al. Doping of polycrystalline CdTe for high-efficiency solar cells on flexible metal foil. Nature Commun. 4, 2306 (2013).
Panthani, M. G. et al. Synthesis of CuInS2, CuInSe2, and Cu(InxGa1−x)Se2 (CIGS) nanocrystal ‘links’ for printable photovoltaics. J. Am. Chem. Soc. 130, 16770–16777 (2008).
Chirilă, A. et al. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells. Nature Mater. 12, 1107–1111 (2013).
Baier, R., Leendertz, C., Abou-Ras, D., Lux-Steiner, M. C. & Sadewasser, S. Properties of electronic potential barriers at grain boundaries in Cu(In,Ga)Se2 thin films. Sol. Energ. Mat. Sol. C 130, 124–131 (2014).
Choi, Y. C., Lee, D. U., Noh, J. H., Kim, E. K. & Seok, S. I. Highly improved Sb2S3 sensitized-inorganic-organic heterojunction solar cells and quantification of traps by deep-level transient spectroscopy. Adv. Funct. Mater. 24, 3587–3592 (2014).
Zhang, S., Wei, S-H., Zunger, A. & Katayama-Yoshida, H. Defect physics of the CuInSe2 chalcopyrite semiconductor. Phys. Rev. B 57, 9642–9656 (1998).
Leite, M. S. et al. Nanoscale imaging of photocurrent and efficiency in CdTe solar cells. ACS Nano 8, 11883–11890 (2014).
Yin, W. J., Shi, T. & Yan, Y. Unique properties of halide perovskites as possible origins of the superior solar cell performance. Adv. Mater. 26, 4653–4658 (2014).
Tang, J. et al. Colloidal-quantum-dot photovoltaics using atomic-ligand passivation. Nature Mater. 10, 765–771 (2011).
Schmidt, J. et al. Surface passivation of high-efficiency silicon solar cells by atomic-layer-deposited Al2O3 . Prog. Photovolt. 16, 461–466 (2008).
Choi, Y. C. et al. Sb2Se3 sensitized inorganic–organic heterojunction solar cells fabricated using a single-source precursor. Angew. Chem. Int. Ed. 53, 1329–1333 (2014).
Zhou, Y. et al. Solution-processed antimony selenide heterojunction solar cells. Adv. Energy Mater. 4, 201301846 (2014).
Patrick, C. E. & Giustino, F. Structural and electronic properties of semiconductor-sensitized solar-cell interfaces. Adv. Funct. Mater. 21, 4663–4667 (2011).
Luo, M. et al. Thermal evaporation and characterization of superstrate CdS/Sb2Se3 solar cells. Appl. Phys. Lett. 104, 173904 (2014).
Liu, X. et al. Thermal evaporation and characterization of Sb2Se3 thin film for substrate Sb2Se3/CdS solar cells. ACS Appl. Mater. Inter. 6, 10687–10695 (2014).
Major, J., Treharne, R., Phillips, L. & Durose, K. A low-cost non-toxic post-growth activation step for CdTe solar cells. Nature 511, 334–337 (2014).
Mashtalir, O. et al. Intercalation and delamination of layered carbides and carbonitrides. Nature Commun. 4, 1716 (2013).
Hetzer, M. et al. Direct observation of copper depletion and potential changes at copper indium gallium diselenide grain boundaries. Appl. Phys. Lett. 86, 162105 (2005).
Jiang, C-S. et al. Local built-in potential on grain boundary of Cu(In,Ga)Se2 thin films. Appl. Phys. Lett. 84, 3477–3479 (2004).
Li, J. B., Chawla, V. & Clemens, B. M. Investigating the role of grain boundaries in CZTS and CZTSSe thin film solar cells with scanning probe microscopy. Adv. Mater. 24, 720–723 (2012).
Li, C. et al. Grain-boundary-enhanced carrier collection in CdTe solar cells. Phys. Rev. Lett. 112, 156103 (2014).
Sinsermsuksakul, P. et al. Overcoming efficiency limitations of SnS-based solar cells. Adv. Energy Mater. 4, 201400496 (2014).
Limpinsel, M. et al. An inversion layer at the surface of n-type iron pyrite. Energy. Environ. Sci. 7, 1974–1989 (2014).
Leng, M. et al. Selenization of Sb2Se3 absorber layer: an efficient step to improve device performance of CdS/Sb2Se3 solar cells. Appl. Phys. Lett. 105, 083905 (2014).
Kresse, G. & Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 54, 11169–11186 (1996).
Dion, M., Rydberg, H., Schröder, E., Langreth, D. C. & Lundqvist, B. I. Phys. Rev. Lett. 92, 246401 (2004).
Acknowledgements
This work is supported by the Director Fund of WNLO, the National 1000 Young Talents project, the National Natural Science Foundation of China (NSFC 61274055, 91233121, 91433105, 21403078) and the 973 Program of China (2011CBA00703). The authors thank the Analytical and Testing Center of HUST, the Center for Nanoscale Characterization and Devices of WNLO and the Suzhou Institute of Nano-Tech and Nano-Bionics for the characterization support. Y. Yan at the University of Toledo and H. Zhong at the Beijing Institute of Technology are acknowledged for helpful discussions.
Author information
Authors and Affiliations
Contributions
Y.Z. and J.T. conceived the idea, designed the experiments and analysed the data. Y.Z. and L.W. carried out most of the characterizations and device optimizations. S.C. performed the theoretical simulations and analysed the results. S.Q. and X.L. initialized the RTE process. J.C., D-J.X., M.L. and Y.C. participated in the device optimization and data analysis. Y.Ch. helped with the manuscript preparation. E.H.S. and J.T. wrote the paper; all the authors commented on the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Supplementary information
Supplementary information
Supplementary information (PDF 660 kb)
Rights and permissions
About this article
Cite this article
Zhou, Y., Wang, L., Chen, S. et al. Thin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries. Nature Photon 9, 409–415 (2015). https://doi.org/10.1038/nphoton.2015.78
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/nphoton.2015.78
This article is cited by
-
Improved performances in Sb2Se3 solar cells based on CdS buffered TiO2 electron transport layer
Journal of Sol-Gel Science and Technology (2024)
-
A review on the device efficiency limiting factors in Sb2S3-based solar cells and potential solutions to optimize the efficiency
Optical and Quantum Electronics (2023)
-
Recent Advancements in Photoelectrochemical Water Splitting for Hydrogen Production
Electrochemical Energy Reviews (2023)
-
rGO spatially confined growth of ultrathin In2S3 nanosheets for construction of efficient quasi-one-dimensional Sb2Se3-based heterojunction photocathodes
Science China Materials (2023)
-
Recent Advances to Enhance Electrical and Photoelectrical Properties of Antimony Selenide Crystals via Tin Doping
Journal of Electronic Materials (2023)