Abstract
Redox-active films were proposed as protective matrices for preventing oxidative deactivation of oxygen-sensitive catalysts such as hydrogenases for their use in fuel cells. However, the theoretical models predict quasi-infinite protection from oxygen and the aerobic half-life for hydrogenase-catalyzed hydrogen oxidation within redox films lasts only about a day. Here, we employ operando confocal microscopy to elucidate the deactivation processes. The hydrogen peroxide generated from incomplete reduction of oxygen induces the decomposition of the redox matrix rather than deactivation of the biocatalyst. We show that efficient dismutation of hydrogen peroxide by iodide extends the aerobic half-life of the catalytic film containing an oxygen-sensitive [NiFe] hydrogenase to over one week, approaching the experimental anaerobic half-life. Altogether, our data support the theory that redox films make the hydrogenases immune against the direct deactivation by oxygen and highlight the importance of suppressing hydrogen peroxide production in order to reach complete protection from oxidative stress.
Similar content being viewed by others
Introduction
Redox-active polymer films applied as electron-conducting matrices for the immobilization of biological and bio-inspired catalysts on electrodes provide a practical route for their use in processes such as energy conversion. Recent reports demonstrated the effective integration of enzymes such as hydrogenases1,2,3,4, nitrogenase5, formate dehydrogenase6, and photosystems7,8,9,10,11 as well as molecular catalysts12,13,14 in redox matrices on electrode surfaces. Since many of these catalysts are sensitive to O2 to the extent that they deactivate within seconds under aerobic conditions15, the polymer films were further engineered as protection matrices to avoid oxidative deactivation1,2,3,6,9,16. Electrons are transferred within the matrix by a hopping mechanism through redox moieties17 such as viologens, quinones18, or metal complexes9. By taking advantage of electron mediators that feature O2-reducing properties, O2 can be depleted at the outer layers of the film so that the catalysts in the inner layer remain under anaerobic conditions (Fig. 1). Viologen-modified polymer films (Fig. 1a) are particularly suitable for this task due to their fast electron transfer and O2 reduction kinetics19,20,21,22,23,24. Theoretical models predict that these redox films can protect the catalysts against O2 quasi-infinitely3,25. However, experimental observations on electrodes coated with hydrogenase within viologen-modified films indicate that the catalytic current for H2 oxidation decays significantly within one day when O2 is present. In contrast, the turnover stability in anaerobic experiments reaches weeks1. This discrepancy between experiments and theoretical predictions implies that under aerobic conditions, processes other than O2-induced deactivation cause loss in catalytic current. The O2 reduction by viologen moieties typically yields reactive oxygen species, in particular H2O219,26, which can be further converted into H2O as previously observed for viologen-modified polymer films1. However, H2O2 conversion to H2O is slow and is thus hypothesized to cause damage within the catalytic film. Clarification of the degradation processes under aerobic conditions is a key prerequisite for designing the redox matrices as a more robust shield against oxidative stress.
Here, we combine confocal fluorescence microscopy (CFM) and coherent anti-Stokes Raman scattering (CARS) with electrochemistry for the operando analysis of viologen-modified polymer films during catalytic turnover for O2 reduction. We demonstrate that H2O2 accumulates and primarily promotes damage to the polymer backbone rather than loss of active viologen moieties or catalyst. The addition of iodide to the electrolyte enhances the aerobic half-life of viologen-modified polymer films containing an O2-sensitive hydrogenase, reaching values up to 1 week under H2/O2 mixed gas feed. Our data validate the predictions from our previous model3,25 that protection within redox films make catalysts immune to O2, and demonstrate that suppression of reactive oxygen species is also necessary to avoid oxidative degradation of the catalytic films.
Results
Disproportionation of H2O2
In order to decipher the causality between H2O2 generation and the loss of functionality of viologen-modified matrices in aerobic conditions, we compare the behavior of the films in the presence and absence of a catalyst for H2O2 disproportionation. While enzymes such as catalase are commonly applied catalysts for the conversion of H2O2 to water and molecular oxygen25, their co-immobilization in the film or addition into the electrolyte do not enable sufficient stabilization of the films (see Supplementary Note 1 and Supplementary Figs. 1–3). Instead, we employ iodide (I−) owing to its small size and the possibility to use it in high concentrations. Iodide added to the electrolyte can freely diffuse into the redox hydrogel film and catalyzes decomposition of H2O2 (Fig. 1b). The proposed mechanism follows Eqs. (1) and (2) in aqueous solution27,28:
While dismutation of two molecules of H2O2 generates one molecule of O2, successive cycles of the viologen-catalyzed O2 reduction reaction and of the iodide-catalyzed H2O2 decomposition results in H2O as the sole end product. Iodide is regenerated in the process.
Detection of H2O2
We used operando confocal fluorescence to probe the H2O2 production from the viologen-modified hydrogel matrix. We exploited the intrinsic fluorescence of the viologen moieties tethered on the polymer backbone to visualize the volume of the redox matrix. H2O2 production was monitored using a fluorescent reporter (Amplite™ IR) and horseradish peroxidase added to the electrolyte. Fluorescence emission spectra of the viologen films and H2O2 fluorescent probes were recorded during H2O2 generation from electrochemical O2 reduction (Supplementary Fig. 4). Distinction between the matrix-based fluorescence and the fluorescence originating from the H2O2 reporter was made possible by measuring at different excitation and emission wavelengths, namely 488 nm excitation and 500–630 nm emission for viologen mapping, and 633 nm excitation and 640–750 nm emission for H2O2 monitoring. The presence of potassium iodide (KI) did not affect the absorption or emission spectra of either the H2O2-sensitive probe or the viologen moiety (Supplementary Fig. 4).
Confocal fluorescence images were generated as a depth profile (Fig. 2) with the intensities corresponding to the local concentrations of fluorophores4. At open circuit potential fluorescence was observed upon excitation of the viologen moieties (top panel in Fig. 2a, b) in both the presence and absence of iodide. Assuming the viologen moieties are evenly distributed within the film, determination of the full-width half-maximum (FWHM) from the fluorescence profiles enables an estimation of the polymer film thickness. The thickness was similar (FWHM is about 25 µm, Supplementary Fig. 5) for the electrodes in the presence and absence of iodide.
The electrodes were then held at a constant potential of −0.1 V vs SHE (standard hydrogen electrode) to induce the reduction of O2, catalyzed by the viologen moieties in the film. O2-reduction currents were similar for electrodes in the presence and absence of iodide, which suggests comparable H2O2 generation rates (Fig. 2c). Confocal fluorescence images were recorded for 15 min at 5-min intervals. In the absence of iodide, the H2O2-derived fluorescence rose rapidly in the electrolyte (Fig. 2a, d). In contrast, the rate of H2O2-mediated fluorescence rise was about sixfold lower in the presence of iodide (Fig. 2b, d). Moreover, in the absence of the polymer film, both the current for O2 reduction and the fluorescence from H2O2 were negligible (Supplementary Fig. 6). This demonstrates that O2 reduction catalyzed by the viologen-modified film generates H2O2, and that H2O2 can be efficiently dismutated when iodide is present in the electrolyte.
Electrochemical analysis of the film degradation
The effect of H2O2 on the degradation of the viologen-modified polymer film was investigated by performing cyclic voltammetry in the presence and absence of I−. Under argon atmosphere, the cyclic voltammograms (CVs) of the polymer-coated GCE showed a reversible redox wave at E1/2 = −0.21 V vs SHE, which is attributed to the viologen moieties (Fig. 3a, b). In the presence of I−, the shape of the re-oxidation peak became sharper. This is due to the higher hydrophobicity of the I− counter-anion in comparison to phosphate anions, which leads to film deswelling especially in the reduced state, thus enhancing the interactions between viologen moieties (Frumkin behavior4) and enabling rapid reoxidation (surface confined characteristics). Continuous cycling of CVs demonstrated that the viologen-modified polymer films were stable under anaerobic conditions in both absence and presence of I− (Supplementary Fig. 7). The addition of 5% O2 to the argon supply generated a cathodic wave centered at −0.1 V vs SHE, which is more positive than the formal potential of the viologen moieties in the polymer film (Fig. 3a, b). The cathodic wave is attributed to the O2 reduction reaction catalyzed by the viologen moiety in the redox hydrogel film (O2 reduction directly at the bare GCE occurs at potentials 150 mV more negative1, see Supplementary Fig. 10a). The peak shaped current response overlapping with the catalytic sigmoid curve is due to reversible reduction/oxidation of viologens that are not involved in catalysis. Electrochemical simulations demonstrate that the positive potential shift of the catalytic wave with respect to the viologen signals is in agreement with a regime of fast catalysis in thin redox-active films29,30 (see Supplementary Note 2 and Supplementary Figs. 9 and 10b).
Consecutive cycles in the presence of O2 showed that the peak shaped current was mostly unaffected in presence of I−, but it vanished almost completely within 3 h of cycling in absence of I− (Fig. 3a, c). Comparison of the peak current under argon before and after O2 reduction enabled the quantification of the extent of current decrease (Fig. 3d). In the absence of I−, the peak current dropped to 20% of its original value during the 4 h of measurement, while no change in peak current was detected over the same time period when I− was present in the solution during O2 reduction (Fig. 3b, c). Since I− suppresses H2O2 generation, as demonstrated by the CFM investigations, the conclusion from the CV results is that loss of viologen peak current is associated with H2O2 generation.
We subsequently investigated the degradation of the viologen-modified polymer film using CARS and CFM while a potential of −0.1 V vs SHE was applied to the electrodes in the presence of O2 from air (Fig. 4). CARS microscopy has intrinsic high spatial resolution and the contrast in the images results from CH2 stretching vibrations and thus allows for direct monitoring of the polyethylenimine backbone of the viologen-modified polymer. Fluorescence was induced by excitation of the viologen moieties as described above. While fluorescence only reveals the oxidized viologen moieties, CARS can visualize the polymer position regardless of viologen presence or state.
Initially (at t = 0), CARS and fluorescence imaging showed a smooth hydrogel film without breaks both in the absence and presence of I−. The co-localization of the signals from both fluorescence and CARS validated a homogeneous distribution of the viologen moieties within the polymer film. In the experiment without I−, the hydrogel film underwent a distinct deformation and started to detach from the electrode surface after 1.5 h of continuous O2 reduction. Moreover, the fluorescence intensity slightly decreased, possibly because of H2O2-induced degradation of viologen moieties31. At later time points, the film became wrinkled (4 h, Fig. 4a) and completely detached from the electrode after 6 h (Supplementary Movies 1–4). In contrast, the hydrogel film, as well as the viologen fluorescence, remained unchanged under the same conditions in the presence of I− (Fig. 4b). This indicates that the significant loss of peak current observed in the electrochemical measurements in the absence of KI (Fig. 3) was mainly because the polymer backbone, and possibly some of the viologen moieties, degraded and detached from the electrode surface. This is consistent with the previously reported oxidation and degradation of polyethylenimine when exposed to hydrogen peroxide32,33. These observations highlight the need for efficient dismutation of H2O2 generated from the viologen-catalyzed O2 reduction reaction in order to avoid decomposition of the redox hydrogel film.
Turnover stability of viologen-modified films containing hydrogenase
The impact of dismutating H2O2 with iodide on the turnover stability for enzymatic H2 oxidation was investigated with electrodes coated with viologen-modified polymer and hydrogenase. These catalytic films were made sufficiently thick (polymer surface coverage: 2.26 mg cm−2) so that the mass transport of H2 limits the catalytic current as evidenced by its linear dependence on H2 partial pressure34 both in the presence and absence of I− (Supplementary Fig. 11). Under such substrate transport limitations, the theoretical models predict that the hydrogenase should be protected quasi-infinitely from O23. Comparison of the turnover stabilities for the polymer-hydrogenase-modified electrodes under 95% H2/5% O2 mixed gas feed in the presence or absence of I− are given in Fig. 5a. Similar O2 concentrations were recorded in both cases during the experiments (Supplementary Fig. 12). In the absence of I−, only half of the initial current remained after 1.5 day (half-life: 1.4 ± 0.14 day). The loss of catalytic current is in agreement with the significant film degradation observed in the confocal microscopy studies (Fig. 4a). By contrast, in the presence of I− the loss in catalytic current was only 9% in the same time period and prolonged measurements showed a half-life of 7.3 ± 1.9 days) (Supplementary Fig. 12b, d), which is also reached at elevated temperatures of 40 °C (Supplementary Fig. 12e half-life: 6.3 ± 1.4 days). A control experiment lacking the viologen polymer in which the enzyme is in a direct electron transfer configuration with the electrode shows that iodide concentrations up to 100 mM do not significantly impact the catalytic activity for H2 oxidation under anaerobic conditions (Supplementary Fig. 14). Therefore, the strongly enhanced aerobic stability of the electrocatalytic output is attributed to the iodide-catalyzed H2O2 dismutation which prevents film degradation as demonstrated from the CARS and fluorescence experiments (Fig. 4b). The aerobic turnover stability in the presence of I− approaches but still does not reach that under anaerobic conditions (6 weeks)1. This difference can be explained by the presence of residual H2O2 as observed by operando CFM (Fig. 2d). Altogether, these results suggest that H2O2 is the main reason for the decrease of the catalytic current from polymer-hydrogenase electrodes exposed to O2.
The applicability of the iodide containing electrolyte in H2/O2 biofuel cells was tested by coupling the hydrogenase modified anode to an O2 reducing cathode modified with the enzyme bilirubin oxidase in a two-compartment cell. The anode compartment was filled with phosphate buffer containing iodide and the cathode compartment with phosphate buffer only to avoid iodide oxidation. The fuel cell performance tests yielded current densities of 117 ± 30 µA cm−2, power density of 5.8 ± 1.2 µW cm−2, and an open circuit voltage of 1.0 ± 0.05 V (Fig. 5b). These performances are comparable with the ones obtained from fuel cells that do not contain iodide1,2 and thus demonstrate the absence of detrimental effects of its use as electrolyte in the anodic compartment.
Discussion
The discrepancy between model predictions and experimental observations for the half-life of O2-sensitive catalysts embedded in viologen-modified films used as protection matrices has been revealed through a combination of operando CFM and CARS coupled with electrochemistry. We demonstrate that the use of iodide in the electrolyte leads to suppression of H2O2, to enhanced stability of the viologen polymer film when catalyzing O2 reduction, and to extended half-life of the hydrogenase when catalysing H2 oxidation (up to 1 week) under aerobic conditions. These results indicate that the loss in catalytic current for H2 oxidation is not due to the direct deactivation of the hydrogenase by O2, but rather due to the degradation of the redox matrix caused by H2O2 generated from the O2 reduction reaction when catalyzed by the viologen-modified polymer. This is in agreement with the theoretical model that shows that the polymer film efficiently protects the hydrogenase from O2 by reducing this deactivating molecule at the film–electrolyte interface before it reaches the O2-sensitive catalyst within the film3. However, in order to achieve full protection, complete reduction of O2 to water is necessary to bypass additional deactivation pathways involving reactive oxygen species that degrade the redox film.
In this context, the use of iodide is particularly advantageous since the dismutation of H2O2 leads to water and half a molecule of O2 that is further reduced by the viologen, and thus eventually leads to water as the sole final product. The iodide being used as a catalyst in this reaction is not used up and therefore represents a practical solution for long-term operation of energy converting systems in which H2O2 production is often an undesired side reaction of the system. This approach for H2O2 removal being exclusively based on tuning the composition of the electrolyte, rather than tuning the catalytic system itself, is directly applicable for enhancing the stability of other low potential electrochemical or photochemical systems suffering from degradation induced by H2O2 generation.
Methods
Chemicals, polymer synthesis and protein purification
Amplite™ Fluorimetric Hydrogen Peroxide Assay Kit (Near Infrared Fluorescence) (AAT Bioquest), potassium iodide, tris(hydroxymethyl)aminomethane, potassium dihydrogen, and di-potassium hydrogen phosphate trihydrate were purchased from VWR Chemicals. All chemicals were of analytical grade and directly used as received without further purification. The viologen-modified polymer was synthesized as described previously1 and dissolved (40 mg ml−1) in distilled water for drop-casting. DvMF [NiFe] hydrogenase was purified as described previously35,36.
Film formation on glassy carbon electrode surface
For hydrogenase-polymer electrodes, an aqueous suspension of the viologen-modified polymer (4 µL, 40 mg ml−1) and [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki F (3 µL, 200 µM in 0.01 M MES buffer, pH 6.8) were mixed and applied to the GCE (3 mm diameter). For CFM, CV, and fuel cells studies, the polymer was drop-cast onto the GCE with surface coverages indicated in the captions of the figures. In all cases, Tris buffer was added to the solution droplet (1 µL, 0.1 M, pH 9) immediately after drop-casting to accelerate the polymer cross-linking via disulfide bond formation. Electrodes were stored at 4 °C in a closed vessel overnight. After 12 h the solution became turbid and was then left to dry in air for another hour before the electrochemical measurements.
Fluorescence characterization
Fluorescence measurements were performed on a Leica Microsystems TCS SP8 CARS laser scanning microscope in a fully confocal optical setup. An argon gas laser excited the samples at 488 nm and an He–Ne laser was used for excitations at 633 nm, through an HC PL Fluotar ×10/0.3 dry or Fluotar VISIR ×25/0.95 water objective. The emission was detected in EPI direction with photomultiplier tubes (PMTs) from 500 to 630 nm, and from 640 to 750 nm, respectively. During fluorescence measurements the temperature in the sample compartment was stabilized at 300 K. The stock solutions of Amplite™ fluorimetric hydrogen peroxide assay kit were prepared according to the manufacturer’s protocol.
CARS microscopy
CARS measurements were performed on a Leica Microsystems TCS SP8 CARS laser scanning microscope. A picoEmerald laser system from APE Berlin generated two synchronized pulsed laser beams at 817 and 1064 nm, respectively, which were temporally and spatially overlapped at the measurement position on the sample. The resulting CARS signal at 663 nm was detected via a non-descanned PMT. This corresponds to a Raman intensity at 2841 cm−1. The detection window of the PMT ranges from 560 to 750 nm. During CARS measurements the temperature in the sample compartment was stabilized at 300 K. The CARS lasers and signal detection were focused and collected via the same objectives as for the fluorescence measurements. The measurements followed each other in close succession (very few seconds).
Electrochemistry
All electrochemical measurements were carried out with BA Metrohm Autolab as well as a rotating-disc electrode setup. Gas mixtures of H2, Ar, and O2 were controlled with mass-flow controllers. A Pt wire was used as counter electrode. The reference electrode was Ag/AgCl/3 M KCl. Potentials are converted to the SHE using the correction ESHE = EAg/AgCl + 210 mV. All electrochemical measurements were performed at 298 K. During the measurements, the O2 concentration was monitored with FireStingGO2.
The H2/O2 biofuel cell was assembled from a hydrogenase-polymer modified anode and a bilirubin oxidase modified cathode (see ref. 37 for cathode preparation) in a two-compartment cell with a porous glass frit as a separator. The anode for H2 oxidation was placed in the compartment containing phosphate buffer (0.1 M, pH 7) and KI (0.1 M) purged with 100% H2. The cathode for O2 reduction was placed in the compartment containing phosphate buffer (0.1 M, pH 7) purged with 100% O2. The fuel cell was operated under anode-limiting conditions by using an oversized bilirubin oxidase modified cathode1,2. Power curves were calculated from the steady-state currents obtained from stepped potential chronoamperometric experiments.
Data availability
All data that support the findings of this study are available from the corresponding author upon request. The source data underlying Fig. 3, Fig. 5, Supplementary Figs. 1–3, Supplementary Figs. 7, 8, Supplementary Fig. 12 and Supplementary Fig. 14 are provided as a Source Data file. The code for the model described in Supplementary Note 2 is provided as a Source Data file.
References
Plumeré, N. et al. A redox hydrogel protects hydrogenase from high-potential deactivation and oxygen damage. Nat. Chem. 6, 822–827 (2014).
Oughli, A. A. et al. A redox hydrogel protects the O2-sensitive FeFe-hydrogenase from Chlamydomonas reinhardtii from oxidative damage. Angew. Chem. Int. Ed. 54, 12329–12333 (2015).
Fourmond, V. et al. Mechanism of protection of catalysts supported in redox hydrogel films. J. Am. Chem. Soc. 137, 5494–5505 (2015).
Li, H. et al. Preventing the coffee-ring effect and aggregate sedimentation by in situ gelation of monodisperse materials. Chem. Sci. 9, 7596–7605 (2018).
Milton, R. D. et al. Nitrogenase bioelectrocatalysis. Heterogeneous ammonia and hydrogen production by MoFe protein. Energy Environ. Sci. 9, 2550–2554 (2016).
Sakai, K., Kitazumi, Y., Shirai, O., Takagi, K. & Kano, K. High-power formate/dioxygen biofuel cell based on mediated electron transfer type bioelectrocatalysis. ACS Catal. 7, 5668–5673 (2017).
Kothe, T. et al. Engineered electron-transfer chain in photosystem 1 based photocathodes outperforms electron-transfer rates in natural photosynthesis. Chem. Eur. J. 20, 11029–11034 (2014).
Sokol, K. P. et al. Rational wiring of photosystem II to hierarchical indium tin oxide electrodes using redox polymers. Energy Environ. Sci. 9, 3698–3709 (2016).
Tapia, C. et al. Wiring of photosystem I and hydrogenase on an electrode for photoelectrochemical H2 production by using redox polymers for relatively positive onset potential. ChemElectroChem 4, 90–95 (2017).
Efrati, A., Tel-Vered, R., Michaeli, D., Nechushtai, R. & Willner, I. Cytochrome c-coupled photosystem I and photosystem II (PSI/PSII) photo-bioelectrochemical cells. Energy Environ. Sci. 6, 2950–2956 (2013).
Yehezkeli, O., Tel-Vered, R., Michaeli, D., Nechushtai, R. & Willner, I. Photosystem I (PSI)/Photosystem II (PSII)-based photo-bioelectrochemical cells revealing directional generation of photocurrents. Small 9, 2970–2978 (2013).
Reuillard, B., Warnan, J., Leung, J. J., Wakerley, D. W. & Reisner, E. A poly(cobaloxime)/carbon nanotube electrode: freestanding buckypaper with polymer-enhanced H2-evolution performance. Angew. Chem. Int. Ed. 55, 3952–3957 (2016).
Oughli, A. A. et al. Dual properties of a hydrogen oxidation Ni-catalyst entrapped within a polymer promote self-defense against oxygen. Nat. Commun. 9, 864 (2018).
Ruff, A. et al. Polymer-bound DuBois-type molecular H2 oxidation Ni catalysts are protected by redox polymer matrices. ACS Appl. Energy Mater. 2, 2921–2929 (2019).
Fourmond, V. et al. The oxidative inactivation of FeFe hydrogenase reveals the flexibility of the H-cluster. Nat. Chem. 6, 336–342 (2014).
Wakerley, D. W. & Reisner, E. Oxygen-tolerant proton reduction catalysis. Much O2 about nothing? Energy Environ. Sci. 8, 2283–2295 (2015).
Blauch, D. N. & Savéant, J. M. Dynamics of electron hopping in assemblies of redox centers. Percolation and diffusion. J. Am. Chem. Soc. 114, 3323–3332 (1992).
Milton, R. D. et al. Rational design of quinones for high power density biofuel cells. Chem. Sci. 6, 4867–4875 (2015).
Bird, C. L. & Kuhn, A. T. Electrochemistry of the viologens. Chem. Soc. Rev. 10, 49–82 (1981).
Thorneley, R. N. F. A convenient electrochemical preparation of reduced methyl viologen and a kinetic study of the reaction with oxygen using an anaerobic stopped-flow apparatus. Biochim. Biophys. Acta 333, 487–496 (1974).
Bambhania, H. M., Chakraborty, D., Wen, H. & Barton, S. C. Impact of oxygen on glucose oxidation kinetics in a redox polymer mediated glucose oxidase electrode. J. Electrochem. Soc. 164, H232–H240 (2017).
Mano, N., Mao, F. & Heller, A. On the parameters affecting the characteristics of the “wired” glucose oxidase anode. J. Electroanal. Chem. 574, 347–357 (2005).
Prévoteau, A. & Mano, N. Oxygen reduction on redox mediators may affect glucose biosensors based on “wired” enzymes. Electrochim. Acta 68, 128–133 (2012).
Prévoteau, A. & Mano, N. How the reduction of O2 on enzymes and/or redox mediators affects the calibration curve of “wired” glucose oxidase and glucose dehydrogenase biosensors. Electrochim. Acta 112, 318–326 (2013).
Li, H. et al. Complete protection of O2-sensitive catalysts in thin films. J. Am. Chem. Soc. 141, 16734–16742 (2019).
Lin, Q., Li, Q., Batchelor-McAuley, C. & Compton, R. G. Use of ‘split waves’ for the measurement of electrocatalytic kinetics. Methyl viologen mediated oxygen reduction on a boron-doped diamond electrode. Phys. Chem. Chem. Phys. 15, 7760–7767 (2013).
Liebhafsky, H. A. The catalytic decomposition of hydrogen peroxide by the iodine-iodide couple at 25°. J. Am. Chem. Soc. 54, 1792–1806 (1932).
Dalmázio, I. et al. The iodide-catalyzed decomposition of hydrogen peroxide. Mechanistic details of an old reaction as revealed by electrospray ionization mass spectrometry monitoring. J. Braz. Chem. Soc. 19, 1105–1110 (2008).
Costentin, C. & Savéant, J.-M. Cyclic voltammetry of electrocatalytic films: fast catalysis regimes. ChemElectroChem 2, 1774–1784 (2015).
Costentin, C. & Savéant, J.-M. Cyclic voltammetry analysis of electrocatalytic films. J. Phys. Chem. C 119, 12174–12182 (2015).
Henrich, J. D., Suchyta, S. & Kohler, B. Ultrafast hydrolysis of a Lewis photoacid. J. Phys. Chem. B 119, 2737–2748 (2015).
Haas, H. C., Schuler, N. W. & Macdonald, R. L. Oxidized polyethylenimine. J. Polym. Sci. Part A-1 Polym. Chem. 10, 3143–3158 (1972).
Englert, C. et al. Enhancing the biocompatibility and biodegradability of linear poly(ethylene imine) through controlled oxidation. Macromolecules 48, 7420–7427 (2015).
Bartlett, P. N. & Pratt, K. F. E. Theoretical treatment of diffusion and kinetics in amperometric immobilized enzyme electrodes Part I. Redox mediator entrapped within the film. J. Electroanal. Chem. 397, 61–78 (1995).
Fichtner, C., Laurich, C., Bothe, E., Lubitz, W. Spectroelectrochemical Characterization of the [NiFe] Hydrogenase of Miyazaki F. Biochem. 45, 9706–9716 (2006).
Yagi, T. et al. Properties of Purified Hydrogenase from the Particulate Fraction of Desulfovibrio vulgaris, Miyazaki. J. Biochem. 79, 661–671 (1976)
Lalaoui, N., Holzinger, M., Le Goff, A. & Cosnier, S. Diazonium functionalisation of carbon nanotubes for specific orientation of multicopper oxidases: controlling electron entry points and oxygen diffusion to the enzyme. Chem. Eur. J. 22, 10494–10500 (2016).
Acknowledgements
The authors thank Dr. Tobias Vöpel for discussions about the H2O2 reporter, Stefanie Stapf for polymer synthesis, Steffen Hardt for help with the fuel cell experiments, and Nina Breuer for the preparation of the DvMF [NiFe] hydrogenase. This work was supported by RESOLV, funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany ́s Excellence Strategy—EXC-2033—Projektnummer 390677874, by the ERC starting grant 715900 and by the ANR-DFG project SHIELDS (PL 746/2-1). H.L. is grateful for the support by the China Scholarship Council (CSC). U.M. and E.F. acknowledge funding by the “Ministerium für Kultur und Wissenschaft des Landes Nordrhein-Westfalen”, the “Regierender Bürgermeister von Berlin-inkl. Wissenschaft und Forschung”, and the “Bundesministerium für Bildung und Forschung”, also in the form of the Leibniz-Research-Cluster (grant number: 031A360E).
Author information
Authors and Affiliations
Contributions
N.P., H.L., and E.F. conceived the research. H.L performed all electrochemical experiments involving mediated electron transfer and contributed to the confocal fluorescence experiments. A.A.O contributed with direct electron transfer electrodes. D.B. performed the electrochemical modeling and simulations. E.F. and U.M. conceived and performed the spectroscopic experiments. W.L. contributed the hydrogenase. All authors contributed to writing the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Peer review information Nature Communications thanks the anonymous reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Source Data
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Li, H., Münchberg, U., Oughli, A.A. et al. Suppressing hydrogen peroxide generation to achieve oxygen-insensitivity of a [NiFe] hydrogenase in redox active films. Nat Commun 11, 920 (2020). https://doi.org/10.1038/s41467-020-14673-7
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-020-14673-7
This article is cited by
-
Rewiring photosynthetic electron transport chains for solar energy conversion
Nature Reviews Bioengineering (2023)
-
Unifying views on catalyst deactivation
Nature Catalysis (2022)
-
Climate change as the dominant driver of recent ecological changes in a semi-arid alpine lake from the Chinese Loess Plateau
Journal of Paleolimnology (2022)
-
Reversible H2 oxidation and evolution by hydrogenase embedded in a redox polymer film
Nature Catalysis (2021)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.