Abstract
Scalable and economical methods for the production of optically pure amino acids, both natural and unnatural, are essential for their use as synthetic building blocks. Currently, enzymatic dynamic kinetic resolution (DKR) underpins some of the most effective processes. Here we report the development of enantioselective extraction coupled with racemization (EECR) for the chirality conversion of underivatized amino acids. In this process, the catalytic racemization of amino acids in a basic aqueous solution is coupled with the selective extraction of one enantiomer into an organic layer. Back-extraction from the organic layer to an acidic aqueous solution then completes the deracemization of the amino acid. The automation of the EECR process in a recycling flow reactor is also demonstrated. Continuous EECR is made possible by the sterically hindered chiral ketone extractant 5, which prevents the coextraction of the copper racemization catalyst because of its nonplanar geometry. Furthermore, the extractant 5 unexpectedly forms imines with amino acids faster and with greater enantioselectivity than less bulky derivatives, even though 5 cannot participate in intramolecular resonance-assisted hydrogen bonding. These features may allow EECR to challenge the preponderance of enzymatic DKR in the production of enantiomerically enriched amino acids.
Similar content being viewed by others
Introduction
Optically pure natural and unnatural amino acids (AAs) find applications as synthetic key precursors for pharmaceuticals, biomaterials, biosensors, and drug delivery systems1,2,3,4. Dynamic kinetic resolution (DKR), which couples an enantioselective irreversible reaction with a racemization step, has been touted as an ideal approach for the preparation of optically pure AAs using enzymatic catalysts5,6,7,8,9. However, it requires considerable optimization on a substrate-per-substrate basis to minimize interferences between racemization and resolution conditions, in conflict with time-to-market pressure, and, in many cases, degradation of the enzymes ultimately limits applicable scales. Numerous asymmetric methods have also been put forward as alternate ways to obtain enantiomerically enriched AAs10,11,12,13,14,15,16,17,18,19. Nevertheless, processes that are economically competitive on a production scale remain forthcoming.
Enantioselective liquid–liquid extraction (ELLE) operating at the interface of organic and aqueous layers has garnered attention because of the comparative ease of scaling up and the recyclability of the organic layers20,21,22,23,24. A serious drawback of ELLE is that the unwanted enantiomer is accumulated in one layer, limiting the yield to 50%. The yield may ideally approach to 100% if ELLE can be coupled with the racemization of the unextracted enantiomer. Such an ideal enantioselective extraction coupled with racemization (EECR) has neither been proposed nor realized to date. Another commonly encountered drawback of conventional ELLEs is the low enantioselectivity of extractants that bind substrates through noncovalent interactions. Our group has developed chiral carbonyls as extractants for the ELLE of underivatized AAs that rely on the reversible formation of covalent imine bonds, and afforded higher enantioselectivities than extractants based on noncovalent interactions25,26,27.
On the basis of these precedents, we have sought to develop the EECR of unprotected AAs with chiral carbonyl extractants. Figure 1a, b compares the hydantoin process9, a representative enzymatic DKR, and the EECR presented in this work. Among other advantages, the EECR uses non-derivatized AAs as feedstock, the final products are easily separated from the reactants, and the organic layer can be used repeatedly. Figure 1c shows the chiral carbonyl compounds tested as extractants for EECR in this work, which share common design elements: (i) an aldehyde or ketone group that reversibly forms imines with the amino group of AAs; (ii) an –OH moiety in ortho to the carbonyl group susceptible to stabilize imine formation through an intermolecular resonance-assisted hydrogen bond (RAHB), as proposed by Gilli et al.28; (iii) a tethered urea that increases the affinity and selectivity of the extractant for its AA substrate through secondary hydrogen-bonding interactions with the carboxylate group.
Accomplishing the EECR of AAs requires the tackling of independent problems. First, the racemization should be rapid at ambient conditions, and the racemization catalyst should be sequestered in the aqueous layer to avoid the racemization of the extracted AA. Second, the enantioselectivity of the extractant for the desired enantiomer needs to be as high as that of rival enzymatic catalysts. Carbonyl extractants previously developed in our group have shown high enantioselectivity in the ELLE of general AAs. However, additional upgrading processes were nevertheless required to meet the needs of customers, substantially increasing the cost of the commercial production of enantiomerically pure AAs. Finally, the rates of both imine formation and its hydrolysis to obtain the AAs must be sufficiently fast to enable a high-throughput EECR process. Previously developed carbonyl extractants capable of exclusive enantioselectivity through the formation of highly stable imine derivatives have failed this last criterion, requiring harsh conditions for hydrolysis27. Despite these competing requirements, here we report that a continuous EECR process could be developed, unexpectedly and paradoxically, using the highly sterically hindered ketone 5 as an extractant.
Results
Exclusive enantioselectivity of 5 in the ELLE of AAs
Figure 2a shows the result of an ELLE experiment that was carried out with phenylalanine (Phe) by the reported method26 using (R)-5 as an extractant. 1H NMR analysis of the organic layer after the extraction of L-Phe for 12 h at room temperature shows a signal centered at 4.26 parts per million (p.p.m.) that corresponds to the α-proton of Phe in the resulting imine, (R)-5-L-Phe, confirming that its formation is involved in the extraction. By contrast, the signal of the α-proton of the diastereomeric imine (R)-5-d-Phe appears at 4.13 p.p.m., allowing for the two diastereomers to be distinguished by proton nuclear magnetic resonance (1H NMR). Alternately, the signals of the C4-H of the imine appearing at 6.1–6.2 p.p.m. can also be a marker for the identification of the two diastereomers. Upon the attempted extraction of d-Phe by (R)-5 under the same conditions, the complex benzyl –CH2– signals centered at 4.9–5.2 p.p.m. indicate the presence of both (R)-5-d-Phe and unreacted (R)-5 in an approximate 65:35 ratio. Thus, it can be concluded that the yield of imine formation is much lower for the mismatched d-Phe/(R)-5 pair. Extending the extraction to 24 h with d-Phe did not further depress the proportion of the free extractant (R)-5. By contrast, imine formation was complete within 4 h for the matched l-Phe/(R)-5 pair.
Finally, Fig. 2a gives the surprising result that the 1H NMR spectrum obtained for the organic layer after the extraction of dl-Phe is identical to that for l-Phe, demonstrating the exclusive selectivity of (R)-5 for the latter. The ELLE experiments for other AAs such as isoleucine (Ile), leucine (Leu), methionine (Met), valine (Val), alanine (Ala), tryptophan (Trp), and naphthylalanine (Nal) gave similar results. Especially in the cases of Val and Ala, the d-forms were not extracted at all (see the 1H NMR and high-performance liquid chromatography (HPLC) data in Supplementary information, Section 5.1).
Figure 2b compares the results of ELLE experiments with extractants 1–5 for Phe, and with extractant 5 for other representative AAs. The enantioselectivities for 1 (aldehyde), 2 (methyl ketone), and 3 (ethyl ketone) decreased with increased bulk, before increasing dramatically for 4 (isopropyl ketone) and 5 (tert-butyl ketone). Moreover, although the yield of imine formation decreased with steric demand in the order of 1 > 2 > 3 > 4, it increased unexpectedly and abruptly for 5.
(R)-5 is highly selective for the AAs, particularly bearing hydrophobic side chains, including the unnatural AA naphthylalanine, an important pharmaceutical precursor29. As expected, the enantiomer (S)-5 is selective in ELLE experiments for the extraction of d-AAs. Although most ELLE experiments were run in chloroform to simplify NMR analyses, comparable results were obtained using dichloromethane, 1,2-dichloroethane, and non-halogenated solvents, such as toluene, tert-butyl methyl ether, and 2-methyltetrahydrofuran (see data in Supplementary information, Sections 6.3.10–6.3.12).
The signal of the –OH group of (R)-5-l-Phe, as shown in Fig. 2a, appears at 12.1 p.p.m, which is shifted upfield compared to those of (R)-1-l-Phe, (R)-2-l-Phe, and (R)-3-l-Phe that appear between 16 and 18 p.p.m. (see Supplementary Fig. 10). This indicates that the imine of 5 has a different structure than the imines of 1, 2, and 3. Indeed, the crystal structure of (R)-5-l-Phe displayed in Fig. 2c demonstrates that RAHB is broken; the –OH group of (R)-5 is not hydrogen bonded to the imine nitrogen, but instead to the carboxylate group of l-Phe. The imine group is also twisted out of plane with respect to the naphthol ring, contrasting with the previously reported coplanar RAHB imine (R)-1-l-Phe as shown in Fig. 2d.
Figure 3a compares the energies of two possible conformers of 1–5, proposed by density functional theory (DFT) calculations with the BLYP functional and the 6-311G* basis set supplemented with D3 dispersion30,31,32,33. In conformer I, the carbonyl oxygen is hydrogen bonded to the hydroxy group, which is known as RAHB. In conformer II, the carbonyl group is involved in hydrogen bonding with the two uryl NH protons, that is, RAHB is broken, and the carbonyl plane is perpendicular to the binaphthol ring.
For compound 1, conformer I is more stable than conformer II by 0.74 kcal/mol, which is consistent with the generally accepted idea that RAHB stabilizes this preferred conformation. By contrast, for 5, the same calculation suggests that conformer I with RAHB interaction is less stable than conformer II by 1.90 kcal/mol, illustrating that bulkier carbonyl substituents raise the energy of the coplanar conformer. Figure 3b compares energy-minimized structures of 1 and 5. A remarkable finding is that conformer II is favored only for 5. The 1H NMR chemical shift of the phenolic hydrogens provides experimental validation for these DFT results: only for 5 is the OH signal consistent with a broken RAHB.
Energy calculations based on the crystal structure predicts that (R)-5-l-Phe is more stable than (R)-5-d-Phe by 5.77 kcal/mol, which rationalizes the exceptionally high stereoselectivity obtained in ELLE experiments (see details in Section 8.3 of the Supplementary information).
Pyridoxal-5′-phosphate (PLP) derivatives described by Breslow as artificial enzymes34 have been widely studied as receptors for amines35,36. The RAHB is a key feature of PLP-derived receptors, where it is generally considered to contribute to the stability of the resulting imines and to provide greater stereoselectivity in the recognition of chiral amines. It is thus paradoxical that the bulkiest carbonyl extractant 5 was found to rapidly form imines with exquisite enantioselectivity using AAs, even in the absence of RAHB. The experimental results for 5 demonstrate that RAHB assistance is not an indispensable element, and that even bulky carbonyl compounds do not have to be excluded in the design of receptors for AAs.
Racemization of AAs, Cu(II) sequestration, and successful EECR
It has been reported that AAs were racemized by the catalytic mixture of Cu2+ (10 mol%)/pyridoxal (1 equiv.) or Cu2+ (10 mol%)/PLP (10 mol%) at a pH of ~937,38. In an effort to find better conditions compatible with EECR, we, fortunately, observed that just 1 mol% of PLP and 1.0 mol% of Cu2+ were sufficient to completely racemize AAs, such as Ala, Phe, Leu, Trp, and Met within a few hours at room temperatures and at a pH of ~12. Under these conditions, the racemization of Phe occurred with a half-life of ca. 30 min, and neither catalyst deactivation nor the formation of undesired side products derived from the AAs was observed over extended periods (Supplementary Figs. 21, 22, and 38(c)). Higher temperatures are required to complete the racemization of bulkier AAs, such as Ile (40 °C) and Val (60 °C) on a comparable timescale (see Supplementary Table 2 in Supplementary information, Section 6.1).
In a typical EECR experiment, a solution of the chiral extractant 5 in an organic solvent immiscible with water was stirred with the above aqueous AA solution containing the racemization catalyst. Under these conditions, the EECR experiments could be performed with concentrations of AAs in the aqueous layer as high as 1–2 M. For Phe, proton NMR monitoring of the organic layers show that the formation of the imine is rapid (ca. 60% reached within 30 min), but that extending the mixing for an additional 2–6 h is beneficial to reach a steady state with an exclusive thermodynamic selectivity for the desired diastereomeric imine (see Supplementary Fig. 26).
Following phase separation, the organic layers were back-extracted with aqueous HCl to hydrolyze the imine, providing the liberated 5 and the enantioenriched (≥98:2 enantiomeric ratio (e.r.) by HPLC) AA as its hydrochloride salt. Hydrolysis is rapid, reaching completion within 1 h at room temperature in the presence of 2 equiv. of 2 N HCl (see Supplementary Fig. 20). NMR analysis of the organic layer following the hydrolysis shows the pristine 5, which could be recycled over a minimum of 20 EECR cycles without showing any sign of degradation (see Supplementary Fig. 19). Neutralization of the aqueous layer allowed for the isolation of the AAs by precipitation. Isolated AA yields over four EECR cycles starting from the racemic AA could reach 76% (up to 305% with respect to 5), demonstrating the superiority of the EECR over the theoretical limit of 50% imposed by the ELLE approach (Table 1 and Supplementary Figs. 27–33). More moderate isolated yields were obtained with hydrophilic AAs due to their greater solubility; however, the performance of the EECR process itself was not diminished. Comparable yields and selectivities were obtained using either halogenated solvents, toluene, 2-methyltetrahydrofuran, or tert-butyl methyl ether. Finally, it should be noted that the EECR was equally as effective in the deracemization of AAs (e.g., dl-to-l) as in the conversion of one enantiomer into another (e.g., d-to-l; see Supplementary information, Section 6.3).
The transfer of Cu2+ ions from the aqueous layer to the organic layer was a serious problem that previously impeded the successful implementation of EECR. The use of 5 as an extractant also solved this problem. Figure 4a, b compares the color changes of the solutions of 1 and 5 during EECR trials for Phe. In the case of 1, the transfer of Cu2+ ion to the organic layer resulted in the darkening of the biphasic mixture within 3 h of stirring. The same features were observed during EECR attempts using 2 and 3. Thus, EECR could not be run using 1, 2, or 3 as extractants. The coplanarity of the imine and adjacent phenol group probably favors the binding of Cu2+ ions.
When 5 was used as an extractant, however, both the organic and aqueous layers conserved their initial colors, even after several repeated cycles of imine formation and hydrolysis, indicating the sequestration of Cu2+ ions in the aqueous layer. Further analysis by atomic absorption spectrometry confirmed, remarkably, that leaching of Cu(II) ions in the organic layer did not occur ([Cu] ≤ 1 p.p.m.), even after 40 h stirring under EECR conditions with 5. The orthogonality of the imine plane to that of the naphthol ring in 5 likely prevents the formation of tight salicylaldimine-type Cu2+ complexes.
EECR in a continuous flow reactor
Continuous EECR in flow was developed following the encouraging results of the above EECR experiments. The designed apparatus, shown in Fig. 4c, is composed of three stages that, respectively, perform the EECR, hydrolysis, and residual acid scavenging. EECR is performed in consecutive stirred reactor chambers R1–R3, which flow into the U-tube U1 to allow for the separation of the reaction mixture into organic and aqueous layers. A peristaltic pump P1 transfers the separated organic layer from U1 to the consecutive stirred reactor chambers R4–R6 that carry the hydrolysis of the imine. The following separation of the layers in U-tube U2 provides the organic layer containing 5 and the aqueous layer containing enantiomerically pure AA as its HCl salt. The acidic organic layer flowing from U2 is transferred to U-tube U3 for residual acid scavenging before it is recycled into R1, where a new EECR cycle start. During the process, the starting AA is also fed into the reactor R1 in discrete additions to compensate for its depletion. This system is an expanded variant of the well-known U-tube design to perform a continuous transfer of material from one side to the other39,40,41.
Using the apparatus shown in Fig. 4d, EECR in flow enabled the continuous conversion of common l-Phe to the more valuable d-Phe. The apparatus was charged with a solution of the chiral extractant (S)-5 (4.5 g, 7.6 mmol) in dichloromethane (40 mL), and l-Phe (5.0 g, 30 mmol) alongside the racemization catalyst in the aqueous layer (20 mL). The reactor was operated continuously for 40 h. During this period, two additional equivalents of l-Phe (2.5 g, 15.2 mmol) were fed in. From the hydrolyzed aqueous layer was isolated 4.9 g (29.7 mmol) of the solid d-Phe with enantiopurity of ≥98:2 e.r., corresponding to 3.9 equiv. of the extractant, or 65% based on the total l-Phe used. No sign of degradation of the chiral extractant 5 was detected after 40 h of continuous operation, demonstrating the appeal of the EECR of AAs relying on 5 for further process intensification and commercial-scale production.
In conclusion, we have demonstrated the EECR as a DKR process for the deracemization of unprotected AAs using only extractive processes. The success of EECR relied on the highly sterically hindered pivaloylated extractant 5, and the identification of a compatible catalyst system for the racemization of AAs under ambient conditions. The orthogonal arrangement of the pivaloyl group and the naphthol ring in 5 prevents the co-extraction of Cu2+ ions. The extractant 5 shattered the widely accepted view that the RAHB found in vitamin B6 cofactor mimics is required for the formation of stable imines, which may open new perspectives in imine chemistry and its applications. A great advantage of EECR compared to other processes like enzymatic DKR and asymmetric chemical syntheses are the potential for the development of automated continuous processes as shown in the flow reactor designed and operated in this work. Although the 100-mL continuous reactor was so far only operated up to multigram reaction scales, this work foreshadows practical and cost-effective extensions far beyond this scale for the deracemization of underivatized AAs.
Methods
Materials
NaH (60%), tert-butyllithium (1.6 M in hexane), and other conventional reagents were obtained from Sigma-Aldrich, Alfa-Aesar, or TCI, and used as received without further purification. Enantiomerically pure 2,2ʹ-binol-3-carboxylic acid was provided by Aminologics (Seoul, Korea). Compound (R)-1 and (R)-2 were prepared following literature procedures25,26. The syntheses and characterization data for (R)-3–(R)-5 are described in Supplementary information, Section 1.
Instruments and analyses
1H NMR spectra were recorded on a Bruker AVANCE 300 spectrometer (300 MHz) at the National Research Facilities and Equipment Center (NanoBio·Energy Materials Center) at Ewha Woman’s University. Chemical shifts were quoted in p.p.m. referenced to 0.0 p.p.m. for tetramethylsilane. Carbon-13 NMR spectra were recorded on Bruker AVANCE 300 spectrometer (75 MHz), and were fully decoupled by broadband proton decoupling. Chemical shifts were reported in p.p.m. referenced to the centerline of a triplet at 77.0 p.p.m. of chloroform-d. High-resolution mass spectra were recorded on an Agilent Mass spectrometer on EI or FAB mode. Agilent 1260 HPLC system using Sumichiral OA-5000 or OA-6100 column was used for determination of the enantiopurities of AA solutions.
Representative ELLE experiment for an AA with (R)-5 as the extractant
The organic layer was prepared by dissolution of (R)-5 (0.60 g, 1 mmol) and Aliquat 336 (0.43 g, 1.05 mmol) into CHCl3 (2 mL). The aqueous layer was prepared by the addition of dl-AAs (4.0 mmol) to a solution of NaOH (0.16 g, 4.0 mmol) in water (2 mL). The two solutions were mixed and stirred vigorously at room temperature (20–25 °C). The stirring was continued until the imine formation was completed.
Representative EECR experiment for an AA with (R)-5 as the extractant
The organic layer was prepared by dissolution of (R)-5 (0.60 g, 1.0 mmol) and Aliquat 336 (0.43 g, 1.05 mmol) in CDCl3 (1.0 mL). The aqueous layer was prepared by the addition of d-AA (4.0 mmol), NaOH (0.16 g, 4.4 mmol) in water (2.0 mL), and both PLP (0.011 g, 0.04 mmol) and CuSO4 (0.0064 g, 0.04 mmol) were added to the aqueous solution. The two solutions were mixed and stirred vigorously in a sealed glass vial at room temperature (20–25 °C) for 3–6 h, until the imine formation was completed.
Hydrolysis of the imine in the organic layer (back-extraction)
After the extraction in the experiment of ELLE or EECR, the organic layer was separated and stirred with 2.0 mL of 2.0 N HCl solution for 2 h at room temperature, which led to the clean recovery of the extractant (R)-5 and Aliquat 336 in the organic layer and the enantiomerically pure AA in the aqueous layer. This process was monitored by 1H NMR and HPLC analysis.
Continuous EECR using the specially designed apparatus shown in Fig. 4d
The aqueous layer in the EECR part was prepared from l-Phe (6.0 g, 38 mmol), PLP (0.03 g, 0.12 mmol), and CuSO4(0.0096 g, 0.06 mmol) dissolved in 20 mL water, and the pH was adjusted to 12.0 by the addition of NaOH. The organic layer was prepared by dissolving (S)-5 (4.5 g, 7.6 mmol) and Aliquat 336 (4.3 g, 8.5 mmol) in 40 mL of CH2Cl2. The hydrolysis chambers R4–R6 used a 2.0 N aqueous HCl layer. The residual acid scavenging chamber U3 used a 1.0 M aqueous Na2CO3 layer to neutralize residual HCl in the organic layer. Transfer rates of the pumps were controlled to be ~0.15 mL/min.
Data availability
All experimental data are available in the main text or the Supplementary information. The X-ray crystallographic coordinates for structures reported in this study have been deposited at the Cambridge Crystallographic Data Centre (CCDC), under deposition number 1948381 [https://doi.org/10.5517/ccdc.csd.cc23dg00]. These data can be obtained free of charge from The Cambridge Crystallographic Data Centre via www.ccdc.cam.ac.uk/data_request/cif. Data are also available from the corresponding author on request.
References
Blaskovich, M. A. Unusual amino acids in medicinal chemistry. J. Med. Chem. 59, 10807–10836 (2016).
Yang, M. & Song, W. J. Diverse protein assembly driven by metal and chelating amino acids with selectivity and tenability. Nat. Commun. 10, 5545 (2019).
Tao, K., Makam, P., Aizen, R. & Gazit, E. Self-assembling peptide semiconductors. Science 358, eaam9756 (2017).
Wiedman, G., Kim, S. Y., Zapata-Mercado, E., Wimley, W. C. & Hristova, K. pH-triggered, macromolecule-sized poration of lipid bilayers by synthetically evolved peptides. J. Am. Chem. Soc. 139, 937–945 (2017).
Musa, M. M. Enzymatic racemization of alcohols and amines: an approach for bi‐enzymatic dynamic kinetic resolution. Chirality 32, 147–157 (2020).
Bhat, V., Welin, E. R., Guo, X. & Stoltz, B. M. Advances in stereoconvergent catalysis from 2005 to 2015: Transition-metal-mediated stereoablative reactions, dynamic kinetic resolutions, and dynamic kinetic asymmetric transformations. Chem. Rev. 117, 4528–4561 (2017).
Rudroff, F. et al. Opportunities and challenges for combining chemo- and biocatalysis. Nat. Cat. 1, 12–22 (2018).
Turner, N. J. Enzyme catalysed deracemisation and dynamic kinetic resolution reactions. Curr. Opin. Chem. Biol. 8, 114–119 (2004).
Altenbuchner, J., Siemann-Herzberg, M. & Syldatk, C. Hydantoinases and related enzymes as biocatalysts for the synthesis of unnatural chiral amino acids. Curr. Opin. Biotechnol. 12, 559–563 (2001).
Wang, Y. et al. Recent approaches for asymmetric synthesis of α-amino acids via homologation of Ni(II) complexes. Amino Acids 49, 1487–1520 (2017).
Wang, J., Liu, X. & Feng, X. Asymmetric Strecker reactions. Chem. Rev. 111, 6947–6983 (2011).
Fu, R., So, S. M., Lough, A. J. & Chin, J. Hydrogen bond assisted L to D conversion of α-amino acids. Angew. Chem. Int. Ed. 59, 4335–4339 (2020).
Leonard, D. J., Ward, J. W. & Clayden, J. Asymmetric α-arylation of amino acids. Nature 562, 105–109 (2018).
He, J. et al. Ligand-controlled C(sp3)-H arylation and olefination in synthesis of unnatural chiral α-amino acids. Science 343, 1216–1220 (2014).
Shirakawa, S. & Maruoka, K. Recent developments in asymmetric phase-transfer reactions. Angew. Chem. Int. Ed. 52, 4312–4348 (2013).
Zuend, S. J., Coughlin, M. P., Lalonde, M. P. & Jacobsen, E. N. Scalable catalytic asymmetric Strecker syntheses of unnatural α-amino acids. Nature 461, 968–970 (2009).
Chin, J., Lee, S. S., Lee, K. J., Park, S. & Kim, D. H. A metal complex that binds α-amino acids with high and predictable stereospecificity. Nature 401, 254–257 (1999).
Bhattacharya, A., Araullo-Mcadams, C. & Meier, M. B. Crystallization induced asymmetric transformation: synthesis of D-p-hydroxyphenylglycine. Synth. Commun. 24, 2449–2459 (1994).
Shiraiwa, T., Shinjo, K., Masui, Y., Ohta, A. & Natsuyama, H. Facile production of D-histidine by asymmetric transformation of L-histidine. Bull. Chem. Soc. Jpn 64, 3741–3742 (1991).
Liu, X., Ma, Y., Xu, L. & Liu, Q. Enantioselective liquid‐liquid extraction of 3‐chloro‐phenyl glycine enantiomers using (S,S)‐DIOP as extractant. Chirality 31, 750–758 (2019).
Pinxterhuis, E. B. et al. Highly efficient enantioselective liquid–liquid extraction of 1,2-amino-alcohols using SPINOL based phosphoric acid hosts. Chem. Sci. 8, 6409–6418 (2017).
Tang, K., Fu, T. & Zhang, P. Enantioselective liquid–liquid extraction of (D,L)-valine using metal–BINAP complex as chiral extractant. J. Chem. Technol. Biotechnol. 88, 1920–1929 (2013).
Schuur, B. et al. Chiral separation by enantioselective liquid-liquid extraction. Org. Biomol. Chem. 9, 36–51 (2011).
Steensma, M., Kuipers, N. J. M., de Haan, A. B. & Kwant, G. Identification of enantioselective extractants for chiral separation of amines and aminoalcohols. Chirality 18, 314–318 (2006).
Park, H. et al. Bioinspired chemical inversion of L-amino acids to D-amino acids. J. Am. Chem. Soc. 129, 1518–1519 (2007).
Huang, H., Nandhakumar, R., Choi, M., Su, Z. & Kim, K. M. Enantioselective liquid-liquid extractions of underivatized general amino acids with a chiral ketone extractant. J. Am. Chem. Soc. 135, 2653–2658 (2013).
Huang, H. et al. Highly enantioselective extraction of underivatized amino acids by the uryl-pendant hydroxyphenyl-binol ketone. Chem. Eur. J. 20, 2895–2900 (2014).
Gilli, G., Bellucci, F., Ferretti, V. & Berto, V. Evidence for resonance-assisted hydrogen bonding from crystal-structure correlations on the enol form of the β-diketone fragment. J. Am. Chem. Soc. 111, 1023–1028 (1989).
Asano, A., Minoura, K., Yamada, T. & Doi, M. Conformational transformation of ascidiacyclamide analogs induced by incorporating enantiomers of phenylalanine, 1-naphthylalanine or 2-naphthylalanine. J. Pept. Sci. 22, 156–165 (2016).
Grimme, S., Antony, J., Ehrlich, S. & Krieg, H. A. A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu. J. Chem. Phys. 132, 154104 (2010).
Becke, A. D. Density-functional exchange-energy approximation with correct asymptotic behavior. Phys. Rev. A 38, 3098–3101 (1988).
Lee, C., Yang, W. & Parr, R. G. Development of the Colle-Salvetti correlation-energy formula into a functional of the electron density. Phys. Rev. B 37, 785–789 (1988).
Elstner, M. et al. Self-consistent-charge density-functional tight-binding method for simulations of complex materials properties. Phys. Rev. B 58, 7260–7268 (1998).
Breslow, R. Biomimetic chemistry and artificial enzymes: catalysis by design. Acc. Chem. Res. 28, 146–153 (1995).
Sharif, S., Schagen, D., Toney, M. D. & Limbach, H.-H. Coupling of functional hydrogen bonds in pyridoxal-5′-phosphate−enzyme model systems observed by solid-state NMR spectroscopy. J. Am. Chem. Soc. 129, 4440–4455 (2007).
Song, S. M., Kimia, M., Lough, A. J. & Chin, J. Highly stereoselective recognition and deracemization of amino acids by supramolecular self-assembly. Angew. Chem. Int. Ed. Engl. 53, 829–832 (2014).
Olivard, J., Metzler, D. E. & Snell, E. E. Catalytic racemization of amino acids by pyridoxal and metal salts. J. Biol. Chem. 199, 669–674 (1952).
Liu, L. & Breslow, R. Selective racemization in preference to transamination catalyzed by pyridoxal enzyme analogs. Tetrahedron Lett. 42, 2775–2777 (2001).
Newcomb, M., Toner, J. L., Helgeson, R. C. & Cram, D. J. Host-guest complexation. 20. Chiral recognition in transport as a molecular basis for a catalytic resolving machine. J. Am. Chem. Soc. 101, 4941–4947 (1979).
Breccia, P. et al. Guanidinium receptors as enantioselective amino acid membrane carriers. J. Am. Chem. Soc. 125, 8270–8284 (2003).
Kharel, S. et al. Homeomorphic isomerization as a design element in container molecules; binding, displacement, and selective transport of MCl2 species (M = Pt, Pd, Ni). J. Am. Chem. Soc. 139, 2172–2175 (2017).
Acknowledgements
This work was supported by National Research Foundation of Korea (NRF) grants funded by the Korea government (2020R1F1A107483 to K.M.K. and 2018R1D1A1B07043568 to J.B.). H.H. acknowledges the National Natural Science Foundation of China (21306107) and the National Natural Science Foundation of Shandong Province, China (ZR2019MB038).
Author information
Authors and Affiliations
Contributions
H.H. designed and first synthesized 5 and obtained initial data; Y.J. set up the continuous reactor, performed EECR experiments, and optimized operational conditions; M.E.S. assisted in the synthesis of compounds; D.K. developed the method for the large-scale synthesis of 5; M.C. developed the facile racemization of amino acids; Q.C. assisted in the synthesis of intermediate compounds; Y.K. solved the crystal structure; S.-J.K. supervised the solution of crystal structure; I.-S.B. carried out experiments for industrial applications; M.W. performed quantitative EECR experiments; J.B. provided important ideas especially on the continuous reactor and contributed to the writing and editing; S.K.K. carried out model calculation jobs; K.M.K. supervised the entire project.
Corresponding authors
Ethics declarations
Competing interests
K.M.K. and H.H. are inventors on a patent (US Patent No. 9,845,288 B2, PCT Pub. No. WO2015/126150) based on the extractant 5, the EECR process, and their use in the production of enantiomerically enriched amino acids. I.-S.B. is employed by the company Aminologics, which has licensed this patent. All other authors declare no competing interests.
Additional information
Peer review information Nature Communications thanks Anthonius Engwerda, Kewen Tang, and Johannes de Vries for their contribution to the peer review of this work.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Huang, H., Jin, Y., Shirbhate, M.E. et al. Enantioselective extraction of unprotected amino acids coupled with racemization. Nat Commun 12, 125 (2021). https://doi.org/10.1038/s41467-020-20402-x
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-020-20402-x
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.