Abstract
The interface between a solid and vacuum can become electronically distinct from the bulk. This feature, encountered in the case of quantum Hall effect, has a manifestation in insulators with topologically protected metallic surface states. Non-trivial Berry curvature of the Bloch waves or periodically driven perturbation are known to generate it. Here, by studying the angle-dependent magnetoresistance in prismatic bismuth crystals of different shapes, we detect a robust surface contribution to electric conductivity when the magnetic field is aligned parallel to a two-dimensional boundary between the three-dimensional crystal and vacuum. The effect is absent in antimony, which has an identical crystal symmetry, a similar Fermi surface structure and equally ballistic carriers, but an inverted band symmetry and a topological invariant of opposite sign. Our observation confirms that the boundary interrupting the cyclotron orbits remains metallic in bismuth, which is in agreement with what was predicted by Azbel decades ago. However, the absence of the effect in antimony indicates an intimate link between band symmetry and this boundary conductance.
Similar content being viewed by others
Introduction
Bismuth is a semimetal with an extremely low density of highly mobile carriers of both signs1,2,3. The long Fermi wavelength of its carriers extends over several tens of lattice parameters. Therefore, only extended defects (such as dislocations) can decay the charge current. In crystals lacking such spatially extended disorder, carriers become ballistic4, and their mobility (and as we will see below their magnetoresistance) easily exceeds any other solid hitherto explored5.
Recent research has shown that an extended Dirac Hamiltonian combined to the Fermi surface structure derived by a tight-binding model6 can explain the complex angle-dependent Landau spectrum of electrons and holes7. The approach successfully accounts for the total evacuation of one or two electron pockets at strong magnetic fields aligned along different axes8. The angle-dependent magnetoresistance and its rich structure9 are also accessible to semiclassical transport theory treating mobility as a tensor9.
Open questions remain, however. The origin of the loss of rotational threefold symmetry in presence of strong magnetic fields9,10,11 is yet to be understood. Such a ‘nematicity’ was also observed on the surface of bismuth crystals12, as well as in other solids13. In addition to ‘valley nemeticity’14,15, other theoretical possibilities for its origin were proposed16.
Another open question is the topology of the electron wave function17,18, its consequences for the metallic surface states in bismuth19 and the evolution of the latter with thickness and Sb substitutions20. The topology of surface states and their status in the trivial/non-trivial dichotomy has been a subject of ongoing debate21,22,23,24,25,26,27. A recent popular theory identifies bismuth as a higher-order topological solid with topologically protected hinge states23. This hypothesis has been invoked to explain the experimental observation of ballistic transport in micrometer-long bismuth nanowires28.
Here, we present a study of magnetoresistance in prismatic crystals of bismuth with ballistic carriers with unexpected consequences for both these issues. By choosing specific crystallographic planes as faces of the prisms, we uncover a specific contribution to electric conductivity when the magnetic field is aligned parallel to a two-dimensional boundary between the three-dimensional crystal and vacuum. The absence of this effect in antimony crystals of identical shapes points to the role played by the band structure topology in tuning the edge-bulk correspondence in macroscopic crystals in the high-field limit (ωcτ ≫ 1). It confirms that the interruption of cyclotron orbits at the boundary of a macroscopic three-dimensional crystal can generate a highly conducting boundary state in which bulk magnetoresistance is absent29,30.
It is known that a periodically driven Hamiltonian can provide topological protection in the so-called Floquet systems31,32,33. In presence of quantizing magnetic fields, cyclotron orbits interrupted at the edge may be conceived as a periodical perturbation to the local electrons, but we are not aware of any available theory on this.
Our results identify the source of the loss of rotational symmetry and apparent ’nematicity’9,10,11 in bismuth crystals. The existence of distinct edge states surrounding bulk states would also explain why identical bismuth tilted crystals across a twin boundary can keep different chemical potentials at high magnetic field7.
Results
Samples, carrier mobility, and orbital magnetoresistance
The bismuth (Bi) and the antimony (Sb) crystals used in this study are listed in Table 1. The residual resistivities are remarkably low, considering the low carrier density of these two semimetals (n = p = 3 × 1017 cm−3 in bismuth and n = p = 5.5 × 1019 cm−3 in antimony6). For Bi, ρ0 = 0.18 μΩ cm corresponds to an average mobility of <μe + μh> = 1.2 × 108 cm2 V−1 s−1. For Sb, a residual resistivity of ρ0 = 0.07 μΩ cm corresponds to an average mobility of <μe + μh> = 1.7 × 107 cm2 V−1 s−1. These mobilities exceed those of the samples used in previous studies of magnetoresistance on Bi8,9,10 and Sb34.
Note that the average mobility deduced from residual resistivity ignores the fact that in presence of anisotropic Fermi pockets of electrons and holes, the electrons and holes in different pockets and along different orientations have different mobilities. It is safe to assume that some carriers are ballistic given the size dependence of the residual resistivity35.
Carrier mobility in Bi is probably the highest known in any solid. Bi crystals with a RRR of ≃600 were reported in old scientific literature (Supplementary note 1, see Supplemental Material for more details). However, the high-field magnetoresistance of such samples was not reported before. Bismuth samples subject to pulsed magnetic fields8,36 were small pieces cut from larger crystals and hosted extended scattering centers such as twin boundaries and dislocations. The presence of such disorder led to a shorter electronic mean free path and a significantly lower magnetoresistance compared to the crystals studied here.
The typical magnetoresistance in our crystals is shown in Fig. 1. One can see that the 14 T magnetoresistance of the Bi sample with RRR = 683 is orders of magnitude higher than what was observed in WTe2 at 60 T5,37. The latter was dubbed ‘extremely large magnetoresistance’ by many authors38. However, such a large non-saturating magnetoresistance was reported by Kapitza back in 192839 and is a generic feature of low-density semimetals40.
Triangular prismatic crystals: Bi vs. Sb
Bismuth and antimony crystallize in the rhombohedral A7 crystal structure shown in Fig. 2a. The three axes of high symmetry are known as trigonal (or C3), binary (C2), and bisectrix (C1)1,2. As seen in Fig. 2b, in the trigonal plane, there are three C1 and three C2 axes, which are equivalent upon 2π/3 rotation. Our experiments consisted in measuring the magnetoresistance of Bi and Sb crystals with the electric current applied along C3 and the magnetic field rotating in the trigonal plane. The orientation of the magnetic field is given by θ, which is defined as the angle between the field and the C1 axis. As reported previously9,10, despite the constant angle between current and field, orbital magnetoresistance varies with angle reflecting the in-plane anisotropy of the Fermi velocity in the three electron pockets.
Our main observation is illustrated in Fig. 2c. It shows the angular dependence of electrical conductivity σ at a magnetic field of 12 T and 2 K in a pair of Bi crystals tailored identically as triangular prisms. (Note that since the Hall resistivity is negligible compared to the magnetoresistance, σ ≈ 1/ρ). The only difference between the two crystals was that in one case each of the three square faces of the prism was a binary (C2) plane, while in the other case, it was a bisectrix (C1) plane. The angle-dependent magnetoresistance is clearly different in the two crystals. In one there are conductivity peaks each time the field is along a bisectrix axis. In the other, there are minima (instead of maxima) at the same field orientations.
The same experiment was performed in a pair of Sb crystals tailored in the same way as the bismuth crystals. As one can see in the figure, no difference is visible between the two crystals.
Thus, angle-dependent magnetoresistance depends on the choice of specific crystal planes as faces of each prism in bismuth crystals, but not in antimony crystals. We reproduced this observation in two other pairs of Bi crystals and one other pair of Sb crystals.
Identifying the source of excess conductivity in bismuth
The shape dependence of the orbital magnetoresistance sheds light on the origin of the loss of the threefold symmetry in bismuth crystals of various geometry9,10. As reported previously9,10, this effect emerges only at sufficiently low temperature and high magnetic field. Let us now consider the amplitude of the required magnetic field.
Figure 3 shows the change of angle-dependent conductivity with temperature in a pair of Bi triangular prisms at two different fields, namely B = 14 T and B = 0.2 T. The non-trivial evolution of angle-dependent magnetoconductivity can be quantitatively described by invoking the anisotropy of the effective mass and the evolution of scattering time and carrier density among pockets with temperature and magnetic field. At B = 0.2 T and T = 40 K, angle-dependent magnetoconductivity displays a star-like shape. With cooling, the anisotropy is lowered due to a partial compensation of the mass anisotropy by the emerging anisotropy in the scattering time4. At B = 14 T, the anisotropy of mobility is compensated by an anisotropy in the distribution of carriers among the three pockets8,9,41.
As can be seen in Fig. 3, at both fields, the two samples show an identical angle-dependent conductivity at 40 K, but not at low temperature. Upon cooling, additional features emerge in the first triangular prismatic crystal, which are absent in the second one. Now, at B = 14 T, all electrons are confined to their lowest Landau level, but not at B = 0.2 T. This implies that the observed shape dependence of magnetoconductivity does not require proximity to the quantum limit ℏωc ≈ EF, but the passage to the high-field limit ωcτ > 1.
As for the high-field limit, two relaxation times are to be distinguished. The Dingle scattering time τD, extracted from quantum oscillations is almost fifty times shorter than the transport scattering rate τtr in Bi42. Such a large difference between τtr and τD has been observed in several other dilute metals35,43,44. The semiclassical high-field limit (ωcτtr ≈ 1) is satisfied when the cyclotron radius becomes shorter than the mean free path. The quantum high-field limit (ωcτD ≈ 1) is satisfied when the distance between Landau levels becomes smaller than the broadening caused by temperature and disorder. At T = 40 K, the first criterion is satisfied, but not the second and there is no shape dependence. As the sample is cooled down, the shape dependence and quantum oscillations emerge concomitantly (Supplementary Note 2 and Supplementary Fig. 1, see Supplemental Material for more details). Therefore, one can safely conclude that what matters is the ωcτD ≈ 1 criterion.
The angle-dependent Landau spectrum in each sample is revealed by taking the second derivative of magnetoresistance. It remains identical in the two samples in spite of the difference in the sheer amplitude of the magnetoresistance (Supplementary Note 3 and Supplementary Fig. 2, see Supplemental Material for more details). This observation implies that their bulk Fermi surface is identical and can therefore be excluded as the origin of the shape dependence.
The origin of the additional features in the angle-dependent magnetoconductivity was pinned down by studying two other samples with a square cross section. Samples dubbed Bi-Cub-1 and Bi-Cub-2 (see Table 1) were cubic samples with identical dimensions. Both had two trigonal faces, but their four other faces were different. In Bi-Cub-2, the four other faces were two pairs of bisectrix and binary planes. On the other hand, in Bi-Cub-1, the pairs of faces other than trigonal were not aligned along a high-symmetry plane. They were rotated by a finite angle (≈π/4) around the trigonal axis with respect to the two crystallographic planes (see insets in Fig. 4).
Figure 4 compares the angle-dependent magnetoconductivity of four Bi crystals with different shapes. The temperature and the magnetic field are identical in all cases and the current is always applied along the trigonal axis and the field is rotating in the trigonal plane. Two samples are prisms with triangular cross sections and two are cubes as detailed above. The magnitude of conductance is roughly similar in the four samples, which have comparable dimensions and mobilities. The striking difference is the presence of additional peaks in magnetoconductance and their angular locations. In all the samples, magnetoconductivity peaks when the magnetic field is along the binary axis (B∥C2). On top of these peaks, in all the samples there is another set of peaks, which appear when the magnetic field is parallel to a face of the sample.
In the two triangular prisms, these peaks appear with a periodicity of π/3 and there are six of them. The difference between the two is that in one case the surface peaks and the binary peaks are concomitant and in the other there is a π/6 shift between the two sets of peaks. In prisms with a square cross section, on the other hand, the additional peaks appear with a periodicity of π/2 and there are four of them. They occur each time the field is parallel to one of the four faces. If this face happens to be parallel to the binary axis (i.e., if it is a crystallographic bisectrix plane), than the peak is more pronounced, as shown in Fig. 4d. One can also see that when distinct, the two types of peaks have different angular width and slightly different amplitudes. The surface peaks (marked by blue arrows) are typically twice wider and twice higher than the bulk binary peaks (marked by red arrows).
This observation clearly establishes that the additional contribution to conductivity emerges when the magnetic field (kept always perpendicular to the charge current flowing along the trigonal axis) lies parallel to a two-dimensional boundary of the three-dimensional sample. Moreover, it does not matter at all for this boundary to be a specific crystal plane. The magnitude of the additional contribution remains the same when the boundary in question is the binary plane, the bisectrix plane, or a low-symmetry plane.
The boundary contribution and its relevant length scales
Having demonstrated that the boundary conductivity emerges whenever the magnetic field is parallel to one of the surfaces of a prismatic crystal, let us now consider its evolution with magnetic field.
The relative contribution of the boundary conductance to the total conductivity can be estimated by subtracting the angle-dependent conductivity in two triangular prisms with different crystal planes as faces. This assumes that bulk magnetoconductivity is identical in the two, which is reasonable, but subject to caution given the slight difference in mobility, which implies a difference in the expected magnitude of orbital magnetoresistance.
Figure 5 a shows the relative change in the conductivity between sample Bi-Tri-1a and sample Bi-Tri-2a. What is shown is the evolution of \(r=\frac{{\sigma }_{\#1}-{\sigma }_{\#2}}{{\sigma }_{\#1}+{\sigma }_{\#2}}\) with magnetic field and the angle between field and the crystal axes. The dimensionless r alternates between 0.2 and −0.2. Vertical red stripes show the excess conductivity in sample 1 and vertical blue stripes show the excess conductivity in sample 2. Remarkably, the width of the stripes or their color does not vary with increasing magnetic field. The relative amplitude of the excess boundary conductivity does not change even when the field increases by two orders of magnitude and the amplitude of conductivity decreases by almost four orders of magnitude.
Figure 5b shows the dependence of r on angle at B = 0.2 T and B = 10 T. It is striking to observe how the two curves superpose on each other, in spite of a 50-fold change in magnetic field. Thus, the correction to conductivity brought by the B ∥ surface configuration both in amplitude and in angular dependence does not evolve with magnetic length \({\ell }_{B}=\sqrt{\frac{\hslash }{eB}}\), which changes by a factor of 7 between the two fields.
The data presented in Fig. 5b contains another important feature. Within an angular window of ±4 degrees, we can fit each peak with a \(\cos (q\theta )\) function with q as a free fitting parameter. The fact that a simple cosine fits the data implies that the excess conductivity detected here is not singular, as observed in other contexts45. Moreover, we find that when the surface becoming parallel to the magnetic field was a bisectrix crystallographic plane q = 20.3 ± 3 and when it was a binary crystallographic plane, it was q = 8.1 ± 1. q quantifies the sharpness of the peak, presumably caused by the anisotropy of the relevant length scales. Now, the Fermi momentum and wavelength of electrons is fourteen times longer along the bisectrix (C1) axis than along the binary axis (C2)6. This is a consequence of the huge (200-fold) anisotropy of the in-plane electron mass. Therefore, the significant difference between the angular width of the excess conductivity brings us to suspect a key role played by the Fermi wavelength of electron pockets in any plausible scenario.
Discussion
Cyclotron orbits and the ‘static skin effect’
Decades ago, Azbel and Peschanskii put forward the concept of a static skin effect at high magnetic fields in metals29,30. This idea provides the departing point of a plausible scenario to explain our observation. In the semiclassical picture, the magnetic field bends the electron trajectory. When the cyclotron radius is shorter than the mean free path of carriers, there is a large magnetoresistance. In semimetals, this magnetoresistance does not saturate even in the high-field limit. Now, at the surface of the sample, the cyclotron orbits are interrupted and what matters is the scattering of the carriers by the edge. If their collision results in a specular reflection then the conductivity at the edge is much higher. As a result, most of the current will flow near the boundaries of the sample where orbital magnetoresistance is absent. This phenomenon was dubbed ’static skin effect’ in analogy with the skin effect in metals. The latter refers to the fact that the density of an alternating current (AC) is largest near the surface of the conductor and decreases exponentially with increasing depth. Note, however, that the conductivity profile in the ’static’ version of the skin effect has a completely different origin.
The large magnetoresistance of bismuth can be understood in the semiclassical picture of cyclotron orbits shrinking with increasing magnetic field (Fig. 6a). When the magnetic field is parallel to a surface, within a thickness of the order of cyclotron radius, electrons can conduct much better than in the bulk and generate a sizeable contribution to the total conductivity (Fig. 6b).
However, this semiclassical scenario fails to explain two key observations. The first is the fact that, as we saw above, the amplitude of the effect is unchanged when the magnetic field is changed by a factor of 50 (see Fig. 5). This is puzzling in the ‘static skin effect’ scenario where the distribution of current depends on the ratio of the cyclotron radius and the effective sample thickness30. As illustrated in Fig. 6c, increasing the magnetic field will reduce the width of the cyclotron edge and will enhance the difference in the conductivity of the bulk vs. edge. One may argue that these two tendencies may approximately cancel out generating an additional conductivity which does not vary much with the amplitude of the field. However, a perfect cancellation would be mysterious given the difference in the evolution of the magnetoresistance and the cyclotron radius. In addition, how to explain the indifference of the angular width of the peak to the magnitude of the magnetic field? The observation implies that the current profile has remained the same despite a 50-fold shrink in the size of the cyclotron radius.
The second observation is the absence of this phenomenon in Sb. One may be tempted to invoke a possible difference in surface rugosity. However, there is no evidence for such a difference. In addition, it is unlikely for a quantitative difference in surface quality to totally erase the effect and make the outcome qualitatively different.
The contrast between Bi and Sb can be traced to a fundamental feature of their electronic properties involving the symmetry of their band structure.
Band inversion and topological invariants: Bi vs. Sb
The third-neighbor tight-binding model conceived by Liu and Allen6 gives a successful account of the electronic band structure of bulk bismuth and antimony, as documented by numerous experiments. The model quantifies hopping energies between first, second, and third neighbors with unprimed (V), primed (\({V}^{\prime}\)) and double-primed (V″) parameters, respectively. The crystal lattice has two sub-lattices, i.e., the unit cell includes two atoms. The third neighbor of the original atom is the closest neighbor on the same sub-lattice and both atoms reside in the same monolayer. The three first and the second neighbor atoms belong to a different sub-lattice and lie in other monolayers above and below the original atom (see Fig. 2a). The 14 adjustable parameters of the model were chosen to give the best agreement with experiment. An additional parameter was spin–orbit coupling (SOC), λ, which was taken to be 0.6 eV for Sb and 1.5 eV for Bi. This model gives a reasonable account of the Fermi surface pockets of electrons and holes and the direct and the indirect gaps of Bi and Sb6.
In 2007, Bi1−xSbx alloys were identified as the first bulk topological insulators17,18,46, based on an important difference between Sb and Bi band symmetries. The starting point of this identification was the band inversion at the high-symmetry L-point in the bulk Brillouin zone, found in this tight-binding model, as well as in previous works47,48. The symmetry of the wave function at the L-point can be classified into symmetric (Ls) and antisymmetric (La) with respect to space inversion, where the eigenvalues of parity operator are +1 for Ls and −1 for La. As one can see in panels a and b of Fig. 7, in bismuth the conduction band at the L-point is symmetric and the valence band is antisymmetric, while the inverse is true in the case of antimony.
There are 8 high-symmetry (one Γ, one T, three X, and three L) points in the Brillouin zone (Fig. 7c). They remain invariant under inversion and time-reversal operators. At Γ-, T-, and X-points, there is no difference in parity invariants between Sb and Bi. On the other hand, there is one for the L-points. Kane and collaborators argued that the difference in parity invariants at the L-points leads to a Z2 topological invariant dichotomy between the two systems. As a result, at zero magnetic field, topology of the system is trivial in Bi and non-trivial in Sb18.
Let us briefly discuss what drives this band inversion. Both Bi and Sb crystallize in the A7 rhombohedral crystal structure, which can be assimilated to an assembly of two distorted FCC sub-lattices. As seen in Table 2, there is a significant difference between tight-binding parameters of Bi and Sb. Vppσ is the hopping energy of sigma bonding of p-orbitals of the first neighbors and \({V}_{pp\sigma }^{\prime}\) is the same quantity for second neighbors. One can see that their relative difference is much larger in Sb than in Bi6. As a consequence, the Peierls gap is larger in Sb than in Bi. The larger gap hinders the band crossing and the reversal of Ls/La hierarchy.
In a conventional Peierls transition, the energy of the symmetric band is lower than that of the antisymmetric band49,50. (An intuitive picture of this hierarchy is sketched in the next subsection.) This is exactly what happens in Sb. However, the SOC can alter this energy hierarchy. In Fig. 7d and e, we plot the energies of the conduction and valence bands at the L-point for Bi and Sb as a function of the magnitude of SOC using the Liu-Allen model. The conduction and valence bands of Sb are hardly affected and the energy hierarchy is unchanged by the SOC. On the other hand, the hierarchy is inverted by the SOC for Bi. This hierarchy alternation happens only in Bi, because the band gap (i.e., the lattice distortion) is much smaller and the SOC is larger than in Sb. Actually, the bands of Sb would be inverted if the SOC were unrealistically large (~20 eV).
Interestingly, the Ls and La bands are distinguished by the parity inversion18,51.
Parity and symmetry of the wave functions
The gap opening at the L-point originates from the Peierls distortion3,52. The real-space image of the wave functions of conduction and valence bands are depicted in Fig. 849,50. Peierls distortion can be understood as a dimerization, where the lattice is distorted to generate pairs as seen in Fig. 8a. (Each dimer corresponds to a unit cell of Bi or Sb. Two atoms in the dimers are the first nearest neighbor with each other (Fig. 2a). There are three Peierls chains crossing at each atom in the rhombohedral structure.) The wave functions of a single dimer are given in terms of the bonding and anti-bonding orbitals. The wave function of the symmetric band (ψs) is given by the periodic array of bonding orbitals, whereas the wave function of the antisymmetric band (ψa) is given by that of anti-bonding orbitals (Fig. 8b). It is clear from Fig. 8b that, in absence of dimerization, the energy of ψs is degenerate with that of ψa. (If one removes the dashed boxes from Fig. 8b, one finds that the two wave functions are equivalent in an infinite system.) Dimerization lowers the energy of ψs compared to ψa, because the energy of bonding orbitals should be lower than that of anti-bonding orbitals. The magnitude of the energy gap between ψs and ψa is determined by the degree of dimerization, which is roughly given by the difference between the intra- and inter-dimer hopping, i.e., the difference between Vppσ and \({V}_{pp\sigma }^{\prime}\). It is evident from Fig. 8b that ψs is symmetric and ψa is antisymmetric for the space inversion, where the inversion center of the crystal locates at the bond center in the dimer.
Now, let us consider the reflection of cyclotron orbits at the boundary with these wave functions. We only consider specular reflection normal to the surface for the sake of simplicity. (Although the incidence angle is not restricted to be normal in general, normal reflection is expected to play a major role.) By the normal reflection, the wave vector of electrons changes as k to −k, which corresponds to the parity operation P. The parity operation results in Pψs = + ψs and Pψa = − ψa18,47,48. The sign of the antisymmetric wave function is changed by the reflection at the boundary (Fig. 8) only for ψa. Therefore, naively, one expects a qualitative difference in boundary reflection between ψs and ψa. Further theoretical investigations are required to shed light on this subject.
Electron topology at the cyclotron edge
The static skin effect picture29,30 is a semiclassical approach which does not take into account the phase of the electrons’ wave function. The interruption of cyclotron orbits was framed in a specular-diffusive dichotomy. If the reflection is perfectly specular, momentum is conserved and there is an additional contribution to conductivity. The effect will weaken if the reflection becomes partially diffusive. However, reflected electron waves can interfere with incoming waves. The electronic Fabry interferometers employed in two-dimensional electron gases53 are an eloquent demonstration of this fact.
In a quantum treatment of the interruption of the cyclotron orbits by sample boundaries, it is crucial to consider the fate of the electron wave function and its phase following a mirror transformation. As we saw above, quasi-particles residing in the electron pockets have opposite symmetries in Bi and in Sb. The symmetric conduction band of bismuth, in contrast to the antisymmetric band of Sb, allows a constructive interference upon a mirror reflection at the boundary. However, it remains to be seen how this difference survives in presence of quantizing magnetic field.
Even in the simple isotropic case, large-index Landau wave functions have a non-trivial angular distribution in real space54, which is to be affected by the zero-field anisotropy of the Fermi momentum. The anisotropic cyclotron orbits of Bi surface states have recently become accessible to experiment, thanks to scanning tunneling microscopy studies12.
It is tempting to draw an analogy between the present context and Floquet systems in which topological protection is provided by a periodic perturbation31,32,33. At zero magnetic field, the electronic surface states of a solid are distinct from bulk states by the abrupt interruption of the lattice. There is another distinction, which emerges at high magnetic field. The surface states are periodically disturbed by cyclotron orbits of the bulk. This leads to a spatio-temporal discrete translation symmetry55,56. An edge atom at a given position and time is not instantaneously equivalent to its neighbor. One of the two may be perturbed by an electron from the bulk in its cyclotron orbit, in contrast to the other. On the other hand, the two atoms remain equivalent if the temporal periodicity is taken into account. In other words, the discrete symmetries of space and time become intertwined: \((\overrightarrow{r},t)\to (\overrightarrow{r}+\overrightarrow{a},t+\frac{2\pi }{{\omega }_{c}})\). Future studies will tell if this analogy plays any role in explaining our observation.
One of the motivations of the present study was the theoretical proposal that bismuth is a higher-order non-trivial topological system23. This was put forward to explain the origin of ballistic transport in Bi nanowires detected by superconducting proximity studies28. Note that the boundary ballistic transport detected in our experiment is two-dimensional and does not appear to arise from one-dimensional channels expected in the case of topologically protected hinge states23.
In conclusion, we found that in bulk crystals of bismuth, there is a robust contribution to conductance when the magnetic field is aligned parallel to a two-dimensional boundary of the sample. The absence of this effect in antimony implies that the difference in symmetry of the conduction band has a significant outcome.
A satisfactory explanation of our results is missing and remains a challenge for theory. While the ‘static skin effect’ explains the existence of boundary conductance in a macroscopic crystal, it fails to explain its absence in antimony as well as the robust behavior of the conducting channel in presence of strong magnetic fields. We note that the semiclassical ‘static skin effect’ has not yet been formulated in a quantum-mechanical frame incorporating the known contrast between the parity of the Bloch waves in Bi and in Sb at the L-point. We argued that the latter may affect reflection at the crystal boundaries. To the best of our knowledge, this has not yet been addressed by theory.
Our result has implications for several puzzling observations previously reported in bismuth. The loss of threefold symmetry in transport measurements9,10 finds a natural explanation. It may also be invoked to explain the loss of symmetry seen by thermodynamic probes11. The anomaly caused by the evacuation of a Landau level is a van-Hove singularity with a cut-off due to disorder and finite size. The latter correlates with the shape of the sample. This would imply that the finite size cut-off of the van-Hove singularity may be different for different field orientations. Thermodynamic measurements on samples with different shapes and different sizes will be instructive to check this. Finally, our observation may indicate that boundaries of a bismuth crystal in presence of magnetic field provide a topological barrier. This would provide a possible solution to the puzzle of distinct chemical potentials between twinned crystals of bismuth7.
Methods
Bi and Sb crystals were commercially obtained through MaTecK GmbH, which oriented and cut them to the desired shape and dimensions. The sample surface was not polished and did not go through any other specific treatment. The experiments were performed in two different locations (Ewha University and ESPCI) and with two different set-ups. A home-made set-up was used in Ewha University and a Quantum Design PPMS was used in ESPCI Paris. In both cases, resistivity was measured with a standard 4-wire configuration and electrical contacts were made with silver paste. In order to ensure the homogeneity of charge flow, current electrodes were applied to a thick layer of silver paste (Dupont 4929N) covering most of the end surfaces of the prism except for a small circular area in the center. Then a small island of silver paste was created in the center and voltage electrodes were placed on it. At Ewha University, magnetoresistance was measured with an AC method with a typical current of 100 μA at frequencies between 13 and 17 Hz. For resistivity measurements as a function of temperature, a DC method was used with a typical current of 1 mA. In Paris, measurements were performed using currents between 1 mA and 5 mA and the resistivity option of the PPMS in AC drive mode (50 Hz square wave excitation).
Data availability
All data generating the plots presented in this study can be obtained from the corresponding author upon request.
References
Edelman, V. S. Electrons in bismuth. Adv. Phys. 25, 555–613 (1976).
Issi, J. P. Low temperature transport properties of the group V semimetals. Aust. J. Phys. 32, 585–628 (1979).
Fuseya, Y., Ogata, M. & Fukuyama, H. Transport properties and diamagnetism of dirac electrons in bismuth. J. Phys. Soc. Jpn. 84, 012001 (2015).
Hartman, R. Temperature dependence of the low-field galvanomagnetic coefficients of bismuth. Phys. Rev. 181, 1070–1086 (1969).
Ali, M. N. et al. Large, non-saturating magnetoresistance in WTe2. Nature 514, 205–208 (2014).
Liu, Y. & Allen, R. E. Electronic structure of the semimetals Bi and Sb. Phys. Rev. B 52, 1566–1577 (1995).
Zhu, Z. et al. Landau spectrum and twin boundaries of bismuth in the extreme quantum limit. Proc. Natl Acad. Sci. USA 109, 14813–14818 (2012).
Zhu, Z. et al. Emptying Dirac valleys in bismuth using high magnetic fields. Nat. Commun. 8, 15297 (2017).
Collaudin, A., Fauqué, B., Fuseya, Y., Kang, W. & Behnia, K. Angle dependence of the orbital magnetoresistance in bismuth. Phys. Rev. X 5, 021022 (2015).
Zhu, Z., Collaudin, A., Fauqué, B., Kang, W. & Behnia, K. Field-induced polarization of dirac valleys in bismuth. Nat. Phys. 8, 89–94 (2012).
Küchler, R. et al. Thermodynamic evidence for valley-dependent density of states in bulk bismuth. Nat. Mater. 13, 461–465 (2014).
Feldman, B. E. et al. Observation of a nematic quantum Hall liquid on the surface of bismuth. Science 354, 316–321 (2016).
Jo, Y. J. et al. Valley-polarized interlayer conduction of anisotropic dirac fermions in SrMnBi2. Phys. Rev. Lett. 113, 156602 (2014).
Abanin, D. A., Parameswaran, S. A., Kivelson, S. A. & Sondhi, S. L. Nematic valley ordering in quantum Hall systems. Phys. Rev. B 82, 035428 (2010).
Parameswaran, S. A. & Feldman, B. E. Quantum hall valley nematics. J. Condens. Matter Phys. 31, 273001 (2019).
Mikitik, G. P. & Sharlai, Y. V. Spontaneous symmetry breaking of magnetostriction in metals with multivalley band structure. Phys. Rev. B 91, 075111 (2015).
Fu, L., Kane, C. L. & Mele, E. J. Topological insulators in three dimensions. Phys. Rev. Lett. 98, 106803 (2007).
Teo, J. C. Y., Fu, L. & Kane, C. L. Surface states and topological invariants in three-dimensional topological insulators: application to Bi1−xSbx. Phys. Rev. B 78, 045426 (2008).
Hofmann, P. The surfaces of bismuth: structural and electronic properties. Prog. Surf. Sci. 81, 191 – 245 (2006).
Fuseya, Y. & Fukuyama, H. Analytical solutions for the surface states of Bi1−xSbx (0 ≤ x ≲ 0.1). J. Phys. Soc. Jpn. 87, 044710 (2018).
Ohtsubo, Y. et al. Non-trivial surface-band dispersion on Bi(111). N. J. Phys. 15, 033041 (2013).
Ohtsubo, Y. & ichi Kimura, S. Topological phase transition of single-crystal Bi based on empirical tight-binding calculations. N. J. Phys. 18, 123015 (2016).
Schindler, F. et al. Higher-order topology in bismuth. Nat. Phys. 14, 918–924 (2018).
Hsu, C.-H. et al. Topology on a new facet of bismuth. Proc. Natl Acad. Sci. 116, 13255–13259 (2019).
Aguilera, I., Kim, H.-J., Friedrich, C., Bihlmayer, G. & Blügel, S. Z2 topology of bismuth. Phys. Rev. Materials 5, L091201 (2021).
Hsu, C.-H. et al. Topology on a new facet of bismuth. Proc. Natl Acad. Sci. USA 116, 13255–13259 (2019).
Nayak, A. K. et al. Resolving the topological classification of bismuth with topological defects. Sci. Adv. 5, eaax6996 (2019).
Murani, A. et al. Ballistic edge states in bismuth nanowires revealed by squid interferometry. Nat. Commun. 8, 15941 (2017).
Azbel, M. Y. "Static skin effect" for currents in a strong magnetic field and the resistance of metals. Sov. Phys. JETP 17, 667 (1963).
Peschanskii, V. G. & Azbel, M. Y. "Magnetoresistance of semimetals". Sov. Phys. JETP 28, 1045 (1968).
Kitagawa, T., Berg, E., Rudner, M. & Demler, E. Topological characterization of periodically driven quantum systems. Phys. Rev. B 82, 235114 (2010).
Lindner, N. H., Refael, G. & Galitski, V. Floquet topological insulator in semiconductor quantum wells. Nat. Phys. 7, 490–495 (2011).
Rudner, M. S., Lindner, N. H., Berg, E. & Levin, M. Anomalous edge states and the bulk-edge correspondence for periodically driven two-dimensional systems. Phys. Rev. X 3, 031005 (2013).
Fauqué, B. et al. Magnetoresistance of semimetals: the case of antimony. Phys. Rev. Mater. 2, 114201 (2018).
Jaoui, A., Fauqué, B. & Behnia, K. Thermal resistivity and hydrodynamics of the degenerate electron fluid in antimony. Nat. Commun. 12, 195 (2021).
Fauqué, B., Vignolle, B., Proust, C., Issi, J.-P. & Behnia, K. Electronic instability in bismuth far beyond the quantum limit. N. J. Phys. 11, 113012 (2009).
Zhu, Z. et al. Quantum oscillations, thermoelectric coefficients, and the Fermi surface of semimetallic WTe2. Phys. Rev. Lett. 114, 176601 (2015).
Shekhar, C. et al. Extremely large magnetoresistance and ultrahigh mobility in the topological Weyl semimetal candidate NbP. Nat. Phys. 11, 645–649 (2015).
Kapitza, P. & Rutherford, E. The study of the specific resistance of bismuth crystals and its change in strong magnetic fields and some allied problems. Proc. R. Soc. Lond. Ser. A, Containing Pap. A Math. Phys. Character 119, 358–443 (1928).
Pippard, A. B. Magnetoresistance in Metals (Cambridge University Press, 1989).
Yamada, A. & Fuseya, Y. Angular dependence of magnetoresistance and planar Hall effect in semimetals in strong magnetic fields. Phys. Rev. B 103, 125148 (2021).
Bhargava, R. N. de Haas-van Alphen and galvanomagnetic effect in Bi and Bi-Pb alloys. Phys. Rev. 156, 785–797 (1967).
Liang, T. et al. Ultrahigh mobility and giant magnetoresistance in the dirac semimetal Cd3As2. Nat. Mater. 14, 280–284 (2015).
Kumar, N. et al. Extremely high magnetoresistance and conductivity in the type-II Weyl semimetals WP2 and MoP2. Nat. Commun. 8, 1642 (2017).
Suzuki, T. et al. Singular angular magnetoresistance in a magnetic nodal semimetal. Science 365, 377–381 (2019).
Fu, L. & Kane, C. L. Topological insulators with inversion symmetry. Phys. Rev. B 76, 045302 (2007).
Golin, S. Band structure of bismuth: pseudopotential approach. Phys. Rev. 166, 643–651 (1968).
Gonze, X., Michenaud, J.-P. & Vigneron, J.-P. First-principles study of As, Sb, and Bi electronic properties. Phys. Rev. B 41, 11827–11836 (1990).
Burdett, J. K. From bonds to bands and molecules to solids. Prog. Solid State Chem. 15, 173–255 (1984).
Hoffmann, R. Solids and Surfaces: A Chemist’s View of Bonding in Extended Structures (Wiley-VCH, 1988).
Falicov, L. M. & Golin, S. Electronic band structure of arsenic. I. Pseudopotential approach. Phys. Rev. 137, A871–A882 (1965).
Peierls, R. More Surprises in Theoretical Physics (Princeton University Press, 1991).
Zhang, Y. et al. Distinct signatures for Coulomb blockade and Aharonov-Bohm interference in electronic Fabry-Perot interferometers. Phys. Rev. B 79, 241304 (2009).
Mikhailov, S. A new approach to the ground state of quantum hall systems. Basic principles. Phys. B: Condens. Matter 299, 6 – 31 (2001).
von Keyserlingk, C. W., Khemani, V. & Sondhi, S. L. Absolute stability and spatiotemporal long-range order in floquet systems. Phys. Rev. B 94, 085112 (2016).
Else, D. V., Bauer, B. & Nayak, C. Floquet time crystals. Phys. Rev. Lett. 117, 090402 (2016).
Acknowledgements
This work was supported by the Agence Nationale de la Recherche (ANR-18-CE92-0020-01 and ANR-19-CE30-0014-04), by Jeunes Equipes de l’Institut de Physique du Collège de France and by a grant attributed by the Ile de France regional council. W.K. was supported by the National Research Foundation of Korea (NRF) (No. 2018R1D1A1B07050087 and No. 2018R1A6A1A03025340).
Author information
Authors and Affiliations
Contributions
W.K. and K.B. designed the experiments. W.K. and F.S. carried out the experiments. Y.F. performed theoretical calculations. F.S., B.F., W.K. and K.B. analyzed the data. Y.F. and K.B. wrote the manuscript with input from all authors.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review information
Nature Communications thanks the anonymous, reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Kang, W., Spathelf, F., Fauqué, B. et al. Boundary conductance in macroscopic bismuth crystals. Nat Commun 13, 189 (2022). https://doi.org/10.1038/s41467-021-27721-7
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-021-27721-7
This article is cited by
-
High-field immiscibility of electrons belonging to adjacent twinned bismuth crystals
npj Quantum Materials (2024)
-
Topological zero-dimensional defect and flux states in three-dimensional insulators
Nature Communications (2022)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.