Abstract
Recombinant proteins in complex solutions are typically detected with tag-specific antibodies in Western blots. Here we describe an antibody-free alternative in which tagged proteins are detected directly in polyacrylamide gels. For this, the highly specific protein ligase Connectase is used to selectively fuse fluorophores to target proteins carrying a recognition sequence, the CnTag. Compared to Western blots, this procedure is faster, more sensitive, offers a better signal-to-noise ratio, requires no optimization for different samples, allows more reproducible and accurate quantifications, and uses freely available reagents. With these advantages, this method represents a promising alternative to the state of the art and may facilitate studies on recombinant proteins.
Similar content being viewed by others
Introduction
Western blots present one of the most widely used methods in molecular research. Here, proteins within a complex mixture are separated on a polyacrylamide gel and transferred to a membrane. After additional binding sites on this membrane have been blocked, target-specific antibodies are used to detect the protein of interest (POI), and these, in turn, are visualized by reporter-conjugated antibodies. Overall, the procedure involves multiple steps, which are often adapted depending on the target protein, the chosen antibody combination, or the sample composition1,2. This impedes the comparability of different blots, in particular across different labs3,4,5. Even with identical samples and standard operating procedures, results from different users may vary significantly6. In addition, quantitative analyses are complicated4 and often result in a hyperbolic rather than in the desired linear signal-to-substrate relationship1,4,7.
While commercial POI-specific antibodies are available for many proteins from model organisms and for well-studied targets, no suitable antibodies are on the market for the majority of proteins. In such cases, a small peptide tag can be introduced, which is detectable with a tag-specific antibody. As these antibodies are often better characterized and more reliable compared to POI-specific antibodies8, many researchers prefer this method to study exogenous recombinant proteins, and an increasing number of scientists use gene-editing tools to insert tags in endogenous proteins9,10,11. Popular tags include Streptavidin-, FLAG-, V5-, cMyc-, His6-, HA-, or E-tags, and vary between 6–14 amino acids in length, plus additional linker sequences. Similar small protein tags can also be detected by other means. For example, a C-terminal 11 amino acid fragment, the HiBiT tag, can be used to reconstitute a split luciferase in order to visualize the tagged protein on a blotting membrane12. Alternatively, His6-13 or His12-tags14 can be detected directly in polyacrylamide gels by fluorophore-conjugated chelator probes. Remarkably, however, no protein ligase-based system has yet been established, primarily because the few known ligase enzymes have a low substrate specificity and suffer from side reactions15.
Recently, we identified a protein ligase with very different characteristics16. This enzyme, Connectase (Cnt), is found in methanogenic archaea. Here, it recognizes a sequence in its interaction partner Methyltransferase A (MtrA), which links the catalytic and the transmembrane domain. This sequence consists of a highly conserved KDPGA motif and 10 residues C-terminal of that motif, which vary across different species. We found that Connectase acts on this recognition sequence, even when it is fused to other proteins or molecules. Upon binding, Connectase cleaves the amide bond between aspartate and proline in the KDPGA sequence and forms a new amide bond between its own N-terminal amino group and said aspartate. In other words, the N-terminal substrate fragment ending in KD is fused to the enzyme (in the following N-Cnt), while the C-terminal fragment starting with PGA plus another 10 amino acids (in the following CnTag) is cleaved off. This reaction is reversible, meaning that the substrate is constantly cleaved and re-ligated. Consequently, an alternative CnTag-substrate can replace the original CnTag-fragment in the reverse reaction, resulting in the formation of a new fusion product (Fig. 1).
Compared to known protein ligases, Connectase requires a longer recognition sequence and consequently shows very high specificity and affinity for its substrates. Furthermore, its unique reaction mechanism prevents the usual proteolytic side reactions entirely.
Results and discussion
Sensitive and reliable target protein detection
For our experiments, we used Connectase from Methanosarcina mazei and performed all reactions at room temperature, neutral pH (7.0–7.5), moderate salt concentrations (150 mM NaCl, 50 mM KCl), and in presence of E. coli cell extract to simulate sample impurities. We designed a peptide substrate, with the Cy5.5 fluorophore at the N-terminus, followed by 20 residues based on the Methanosarcina mazei MtrA sequence (Cy5.5-RELASKDPGAFDADPLVVEI). Furthermore, we generated target proteins with N-terminal CnTags (PGAFDADPLVVEI) and short linker sequences (5 amino acids, e.g., AAAGA (see Supplementary Information)). These could be obtained by routine cloning and purification procedures because the start-methionine preceding the CnTag (PGA...) is removed during protein expression by endogenous methionine aminopeptidase16,17.
Using these components, we established a standard protocol to visualize proteins with N-terminal CnTags (Fig. 2; C-terminally tagged proteins require a different procedure and are not studied here). It involves:
-
(1)
the formation of a fluorophore-Connectase conjugate (N-Cnt; see Fig. 1a, middle) by incubating equimolar concentrations (5 µM) of Connectase and the fluorescent peptide substrate for 1 min. The reaction results in an equilibrium, where approximately one out of four Connectase enzymes are conjugated to the fluorophore (i.e., 1.25 µM N-Cnt; Supplementary Fig. 1).
-
(2)
mixing 6.67 nM of this reagent (i.e., 1.67 nM N-Cnt) with the solution containing the protein of interest (POI). This concentration worked for any POI, any concentration and any buffer in this study. The labeling reaction should be incubated for ≥5 min at room temperature in order to obtain a sensitive signal (qualitative analyses) and for 30 min to perform quantitative analyses (Supplementary Fig. 2).
-
(3)
separating the samples on a polyacrylamide gel and analysis on a fluorescence imager or scanner. The signal is stable for several days. For longer storage, the gels should be fixated with 50% methanol/10% acetate. Alternatively, gels can be stained with unspecific dyes (Coomassie brilliant blue) or used for Western blots.
We tested this approach for visualizing small amounts of various CnTagged proteins (125 fmol each, i.e., 1–8 ng depending on the molecular weight of the protein) in large quantities (~20 µg) of cell extract (Fig. 3). In the resulting gel, all target proteins could be detected with a similar signal, while no unspecific bands were seen. Multimeric assemblies (GroES, GST, PsmA, OmpLA18) and membrane proteins (OmpLA) could be detected without difficulty. The employed fluorophore-Connectase conjugate N-Cnt could only be detected as a band in a control reaction without CnTagged POI (first lane in Fig. 3). This band disappeared almost entirely when a CnTagged POI was present, indicating an effective transfer of the fluorophore. In sum, these results show that the in-gel fluorescence assay is a general method to detect CnTagged proteins in a complex mixture with good sensitivity and a high signal-to-noise ratio.
We also tested the procedure in buffers used to keep insoluble proteins in the unfolded state (i.e., 4 M urea) and buffers used for denaturing cell lysis (i.e., RIPA buffer, including 1% NP-40, 0.5% deoxycholate, 0.1% SDS). Labeling rates were only slightly decreased at 4 M urea (Supplementary Fig. 3), so that inclusion body proteins in urea may be detected with the same procedure as soluble proteins in physiological buffer. Even more surprisingly, we found that denaturing RIPA buffer increases labeling rates (typically two-fold) compared to detergent-free buffers. Consequently, cell lysates can be used directly for in-gel fluorescence detection.
In the next step, we analyzed the signal-to-substrate relationship in such reactions. For this, we used a serial dilution of CnTagged proteins in constant amounts (~20 µg) of cell extract. A densitometric analysis of the resulting gels (Fig. 4) shows similar sigmoidal signal increases with increasing target protein quantities (on a log scale). The maximum signal is detected at POI quantities >25 fmol (750 pg in case of a 30 kDa protein) and the half-maximum signal is observed at ~3 fmol (90 pg), suggesting that all pre-formed N-Cnt (~6 fmol) reacts almost quantitatively with the target proteins. In accordance, excess N-Cnt reagent can be detected as an extra band at lower POI levels.
We then compared this approach to Western blots performed under similar conditions (i.e., same cMyc-tagged proteins, IRDye 680-linked secondary antibody, same fluorescence scanner). For this, we transfected adherent HEK293 (Human Embryonic Kidney) cells with plasmids encoding for cMyc- or CnTagged proteins, lysed them in RIPA buffer, and analyzed different cell extract quantities. In Western blots, the target proteins were detected with varying sensitivity and a detection limit of roughly ~500 ng cell extract protein (Fig. 5a). In in-gel fluorescence assays, the target proteins were detected with uniform sensitivity and a detection limit of ~5 ng cell extract protein. To rule out differences in protein expression, we repeated the assay with a serial dilution of purified cMyc- or CnTagged proteins in constant quantities of E. coli cell extract (20 µg per lane; Fig. 5b). Here, the proteins were detected with a sensitivity of ~100 fmol (3 ng of a 30 kDa protein) in the Western blot and ~0.1 fmol (3 pg) in the in-gel fluorescence assay. It should be noted, however, that Western blot sensitivities are highly variable depending on the detection method, the experimental procedure, and the antibody–POI pairs. For example, published fluorescent blots have often lower (~10 fmol1,19) and rarely higher (~1000 fmol20) detection limits than those reported here. Chemiluminescent blots can be more sensitive in our experience (some studies disagree7,20,21) but are not state of the art for quantifications1,4,21. Other in-gel detection methods have published detection limits of 100–200 fmol13,14 (Supplementary Fig. 4). Overall, it can be concluded that in-gel fluorescence assays will in most cases be one or several orders more sensitive than comparable Western blots or other in-gel detection methods.
In-gel fluorescence also proved a more reliable detection method compared to Western blots with tag-specific antibodies. In our experiments, we obtained relatively strong signals for cMyc-tagged Actin, E1, GFP, CyP, GST, and SdAb proteins, but very weak signals for Hsp20, Ubiquitin, and GroES (Fig. 5a and following sections). A study22 on the employed monoclonal 9E10 Anti-cMyc antibody (>7000 cites according to www.citeab.com) confirmed this context dependency. The authors permuted the first two amino acids C-terminal of the cMyc-tag in peptide microarrays and found that 122 out of 800 variants were detected with <10% signal intensity compared to the average; 20 variants could not be detected. A second study23 showed that some cMyc-tagged proteins can be detected in immunofluorescence and immunoprecipitation assays, but not in Western blots, suggesting that the structure of the (partially) denatured protein on the membrane affects tag accessibility or binding affinity. A strong variability was also described for the detection of other small protein tags24. In contrast to this, we observed basically the same labeling behavior for all CnTagged proteins (16 in this study; see also Figs. 4 and 5).
The method presented so far is sensitive and reliable, but, unlike the Western blots in Fig. 5, it gives no quantitative information. This is because Western blots typically use an excess of antibodies to detect relatively smaller POI quantities, while in-gel fluorescence assays use a limited amount of fluorophore to detect relatively larger POI quantities. Fluorophore limitation brings many advantages: The same protocol can be applied for every sample, irrespective of how much target protein is contained. In every case, a noise-free gel image with a defined band and no danger of overexposure or auto-quenching will be obtained. Crucially, however, fluorophore limitation allows a more accurate way of quantifying proteins, which will be presented in the next section.
Relative and absolute protein quantifications
When two CnTagged proteins are used in the in-gel fluorescence assay, they can be expected to compete for the limited N-Cnt reagent. With that in mind, we asked how the observed signal ratio between two competing proteins relates to their relative abundance. If a given amount of a target protein (POI) returns a band that is just as bright as that of a second reference protein (SignalPOI/SignalRef = 1), would it then return twice as much signal if it was twice as concentrated (SignalPOI /SignalRef = 2)? This idea can be summarized as
or
or
[Eq. (1): Relative quantification]
To investigate this, we designed a competition experiment (Fig. 6a), where we mixed constant quantities of one reference protein (125 fmol) with varying quantities of the protein to be analyzed (e.g., 3.906–3906 fmol). The resulting band intensities were quantified densitometrically and analyzed in plots (Fig. 6b and Supplementary Fig. 5). Here, we observed a strictly linear correlation between POI quantities and signal ratio, suggesting the general validity of the above equation. However, the curves were shifted in Y-direction relative to each other, that is, either upwards (e.g. Hsp20 (Fig. 6c)) or downwards (e.g. Ub (Fig. 6b); on a linear scale the curves have different slopes instead (Supplementary Fig. 6)). This means that Hsp20 returns more signal than Ub when compared to the same amounts of reference protein. That should not come as a surprise: After all, both proteins can be expected to have a different reactivity and to affect the brightness of the attached fluorophore in different ways (quenching25). The sum of these effects can be summarized by the protein-pair specific constant k in the equation
[Eq. (2): Absolute quantification]
In summary, this means that the competition assay allows relative protein quantifications when the constant k is unknown (Eq. (1)), and absolute protein quantifications when k is known (Eq. (2)). This is illustrated in Fig. 7. Here, a relative quantification (step 3A) is performed simply by comparing the signal ratios of different samples. In this case, it can be inferred that sample 2 contains 1.65× more POI compared to sample 3 (1.35/0.82 = 1.65) and sample 1 contains 2.49× more POI compared to sample 3 (2.12/0.82 = 2.49).
When a sample with known POI quantities is available (Fig. 7, step 3B), it is possible to determine k. For this, it is sufficient to measure the signal ratio of any POI/reference mixture of known concentration (see Eq. (2); several measurements are advisable for higher accuracy). In the simplest case, a 1:1 mixture is used so that Eq. (2) is reduced to
[Eq. (3): Determination of k with [POI] = [Ref]]
This equation also clarifies the biological meaning of k: it compares the signals obtained from the same amounts of POI and reference. The so-determined k-value can then be used in any subsequent experiment to calculate unknown POI quantities. In Fig. 7, k = 1.27, and the known amounts of reference protein (125 fmol) are used to calculate that sample 1 contains 245 fmol POI (2.12 × 125 fmol/1.27 = 245 fmol), that sample 2 contains 162 fmol (1.35 × 125 fmol/1.27 = 162 fmol), and that sample 3 contains 98 fmol (0.82 × 125 fmol/1.27 = 98 fmol).
Accuracy, reproducibility, and comparability of results
In the next step, we determined the accuracy of such quantifications. For this, we calculated protein quantities via Eq. (2) in 12 independent experiments with a total of 165 signal ratio measurements. We then compared the results to the (known) POI quantities that were actually used in the experiments (Fig. 6 (bottom layer) and Supplementary Fig. 5). We found that the accuracy of the quantification depends on the signal ratio: Equally intense bands can be compared more accurately, while for bands with very different intensity, small errors in the quantification of the less intense band lead to high errors in the calculated POI quantities. Based on these results, we suggest to use the assay at signal ratios between 0.1 and 10, which is sufficient to quantify samples with a 100× difference in POI levels.
Overall, the method proved very accurate with an average error of 4.9% in the suggested signal ratio range (Fig. 6 (bottom layer) and Supplementary Fig. 5). Notably, this error includes both technical errors, such as pipetting errors, and possible deviations from the presumed linear signal ratio–substrate quantity relationship in Eq. (2). Consequently, if such deviations from this empiric finding exist, they must be small enough to warrant sufficiently accurate quantifications.
In order to compare these results with the state of the art4, we designed quantitative Western blot experiments with the same cMyc-tagged POI, a comparable fluorophore (IRDye680), and the same instrumentation. However, as cMyc-tagged Ubiquitin and GroES gave only weak signals (Supplementary Fig. 7), we eventually conducted the experiments with two other cMyc-tagged proteins, SdAb and E1, instead. We also used higher POI quantities (12.5–12500 fmol, corresponding to 0.58 ng–0.58 µg in the case of E1). The obtained signal-substrate curves (Fig. 8) were linear for 12× (SdAb, Hsp20)−32× (E1) POI increases (visualized by dotted lines). Within this range, the quantification values deviated on average by 15.9% from the linear data fits (solid lines). These results are comparable to other published Western blot quantifications, with linear ranges between <10× (CPARP, COXIV, ACTB, GAPDH4; α-Tubulin, β-Catenin21; Hsp90, Tubulin1), 16× (p38, E-cadherin, ERK1/2, GAPDH)1, ~20× (Actin)4 and ~64× (Phospho-β-Catenin21), and similar deviations from data fits (see Butler et al.7 for more examples; errors at lower POI quantities are less visible on the commonly used linear scale (Supplementary Fig. 8)). We conclude that in most cases, in-gel fluorescence quantifications have a broader linear range and are more reliable, reproducible, and accurate.
The factors that lead to the smaller error values observed in in-gel fluorescence quantifications (Fig. 6) are the use of the POI/reference signal ratio instead of the raw POI signal and the smaller number of parameters that influence this readout. While the POI signal alone (see Fig. 4) would be affected by variations in the added N-Cnt reagent, pipetting errors when loading the gel, fluorescence scanner sensitivity settings, or fluorophore bleaching, the POI/reference signal ratio is mostly unaffected by these variables as they influence both the POI and the reference signal in a similar way. Instead, our experiments show that in-gel fluorescence signal ratios are only affected by a few parameters that can be easily controlled: the reaction time (Supplementary Fig. 9), the reaction buffer, and the reaction temperature (Supplementary Fig. 10). By contrast, the POI and reference quantities did not affect the signal ratio, as long as the POI/reference ratio remained constant (Supplementary Fig. 11). Taken together, this means that in-gel fluorescence quantifications show smaller variations than quantitative Western blots, where a lot of parameters affect the POI signals (e.g., transfer, blocking, washing, antibody binding, etc.). With constant reaction conditions (time, temperature, buffer), the main error source is the densitometric analysis itself (e.g., fuzzy bands, inaccurate background subtraction, etc.). This remaining error is also minimized by the use of the signal ratio: While a 100× difference in POI quantities necessitates the error-prone comparison of very strong and thin bands in Western blots, the analysis of a 10× more intense bands (i.e., a signal ratio between 0.1 and 10) is sufficient in an analogous in-gel fluorescence analysis.
Another consequence of the small number of parameters that affect in-gel fluorescence signal ratios is that the results from independent experiments with (exactly) the same reaction conditions are reproducible (Fig. 6). This suggests that signal ratios from different gels can be compared if experiments are performed in the same way, which can be an advantage for continuous studies on the same protein of interest. Conversely, raw POI signals from different Western blots can generally not be compared due to unavoidable blot-to-blot variations1,4 (the blots in Fig. 8 had to be normalized for comparison). For the same reason, it is necessary to load a standard curve with a recombinant protein of known concentration on Western blots for absolute quantifications. As a result, such analyses are rarely seen in the literature. By contrast, a previously determined k value can be used for the same purpose in quantitative in-gel fluorescence analyses, due to the comparability and linearity of the signal ratio read-out (controls are nevertheless mandatory). For example, by mixing the HEK293 cells from Fig. 5a with reference protein, we can conclude in a simple experiment that they contain 603 fmol SdAb per µg cell lysate (Supplementary Fig. 12). We hope that researchers will make ample use of this method in order to obtain more detailed information on biological processes.
Comparison to alternative methods
The presented in-gel detection method can be used for similar analyses as Western blots with tag-specific antibodies but offers various potential advantages. Data suggests that it is simpler, faster, cheaper, and more sensitive. It is practically free of noise and requires no further optimization—throughout all our experiments, we only varied the analyzed samples but kept exactly the same assay procedure. The utilized gels can be further used for Coomassie-staining (e.g., for normalization) or even Western blotting. Due to the simple procedure, experiments and obtained results become more reproducible, in particular across different labs. The most notable advantage, however, lies in quantifications. Western blots often have a narrow and imperfect linear range1,4,7. Conditions that allow quantifications must be identified in previous experiments and are affected by a great number of parameters, such as the blocking agent, band intensities, transfer conditions, or POI quantities/antibody concentrations, to name just a few1,3,26. Even seemingly insignificant differences in the procedure may have a surprisingly strong influence on the results3,4. Sadly, it is not uncommon in literature to just assume a linear relationship without sufficient controls or validations, resulting in misleading or incorrect interpretations5,7. In contrast, the in-gel fluorescence competition assay typically provides a linear signal ratio-to-substrate relationship, enabling accurate relative quantifications with little effort. In addition, it allows absolute quantifications and the comparison of results from different experiments.
It should also be noted that a variety of other in-gel detection methods exist. The company Licor offers protocols for in-gel Westerns, where polyacrylamide gels are soaked in antibody solutions. This procedure is primarily meant for proteins that do not transfer well to membranes, as it requires long incubation and washing steps while offering a lower sensitivity and signal-to-noise ratio compared to regular Western blots. Alternatively, Brüchert et al.14 have used fluorophore-coupled super-chelators (hexaNTAAlexa647) to detect His12-tagged proteins on polyacrylamide gels. While the employed tags can also be useful for pulldowns or during protein purification, the method is less sensitive (detection limit 0.2 pmol14) compared to the approach presented here (0.1 fmol (Fig. 4 and Supplementary Fig. 4), and has only been tested for qualitative analyses. Finally, Raducanu et al.13 pursued a similar approach, except that they used His6 tags and soaked the gel after the run in staining solution (trisNTAAlexa647). This also resulted in a similar detection limit (0.1 pmol) and strongly convex signal-to-substrate curves in quantifications. Taken together, Connectase-mediated in-gel fluorescence offers advantages, not only compared to Western blots with tag-specific antibodies but also compared to existing gel-based methods.
Future research
Our goal is to establish the in-gel fluorescence assay as a standard method for the detection and quantification of recombinant proteins. As a first step in this process, this paper provides users with a detailed characterization and a general protocol (Supplementary Information). Furthermore, we distribute the required materials for free (see the section “Material availability”).
Future research should verify our findings and focus on four goals. First, the method could be improved by using purified fluorophore-conjugated N-Cnt instead of just mixing Connectase and fluorescent peptide (Supplementary Fig. 1). This could result in an increased sensitivity and signal-to-noise ratio as well as reduced labeling times. Second, more efficient and mutually exclusive Connectase/CnTag pairs27 should be identified. These could be used to detect different proteins in parallel (multiplexing). Third, the method should be adapted to enable the detection of C-terminally tagged proteins and native in-gel fluorescence analysis. And finally, the functionality of the CnTag could be improved, for example by generating CnTag-specific antibodies for pulldowns and affinity purification, or by exploring similar Connectase-based detection methods for microplate readers, cytometry, or fluorescence microscopy.
At the end of this process, we hope to bring a proven and widely applicable protein detection method to the lab and fuel further innovative approaches with this enzyme.
Methods
Cloning, expression, and purification
The sequences of all proteins in this study are listed in Supplementary Data 1. The genes were synthesized (Biocat, Heidelberg) or produced via PCR using optimized codon frequencies (E. coli or human). They were cloned into the pET30b(+) vector (restriction sites: NdeI, XhoI) for expression in E. coli or the pcDNA3.1 vector (restriction sites: HindIII, XhoI) for expression in HEK293 cells.
For recombinant expression in E. coli, BL21 gold cells were transfected with the respective plasmids and grown in lysogeny broth medium with 50 µg/l Kanamycin at 22 °C. Protein expression was induced at an optical density of 0.4 at 600 nm with 500 µM isopropyl-β-d-thiogalactoside. Cells expressing soluble proteins were harvested after 16 h, resuspended in buffer (100 mM Tris–HCl, 5 mM MgCl2, 1× cOmplete EDTA-free protease inhibitor cocktail (Roche), 0.02 g/l DNAse, pH 8.0), lysed by the French press, and cleared from cell debris by ultracentrifugation (120,000 × g, 45 min, 4 °C). Inclusion body proteins (i.e., PA173228) were cleared from the soluble cell fraction by ultracentrifugation (120,000 × g, 45 min, 4 °C), homogenized in washing buffer (1 M urea, 1% Triton, 50 mM Tris–HCl, 250 mM NaCl, 5 mM DTT, pH 8.0), centrifuged a second time (as above), and homogenized in denaturing buffer (8 M urea, 50 mM Tris–HCl, 250 mM NaCl, pH 8.0).
For recombinant expression in human cells, HEK293 cells (DMSZ no.: ACC 305) were cultured in six-well plates with DMEM medium at 37 °C. At 70% confluence, the cells were transfected with 2500 ng of the respective plasmids using 12.5 µl Lipofectamine 2000. The cells were harvested after 24 h.
For protein purification, soluble His6-tagged proteins were applied to HisTrap HP columns (20 mM Tris–HCl pH 8.0, 250 mM NaCl, 20–250 mM imidazole; all columns were obtained from Cytiva) and, in a second step to a Superdex 75 size-exclusion column (20 mM HEPES–NaOH pH 7.5, 100 mM NaCl, 50 mM KCl, 0.5 mM TCEP). His6-tagged inclusion body proteins (i.e., PA1732) were purified with HisTrap HP columns under denaturing conditions (20 mM Tris–HCl pH 8.0, 250 mM NaCl, 20–250 mM imidazole, 8 M urea). All chromatography steps were performed on an Äkta Purifier FPLC (GE Healthcare) using Unicorn v5.1.0 software. Purified proteins were supplemented with 15% glycerol, flash-frozen in liquid nitrogen, and stored at −80 °C.
In-gel fluorescence assays
Generally, all reactions were conducted as described in the assay protocol (Supplementary Information). Specifically, samples were prepared in buffer A (50 mM sodium acetate, 50 mM MES–NaOH, 50 mM HEPES–NaOH, 50 mM KCl, 150 mM NaCl, pH 7.0) or RIPA buffer (50 mM Tris–HCl, 150 mM NaCl, 1% NP-40, 0.5% deoxycholate, 0.1% SDS, pH 7.5). To avoid protein loss, low protein binding tubes (Eppendorf) or PCR tubes were used and buffer A was supplemented with a carrier protein (0.1 g/l BSA) or E. coli BL21 gold cell extract (0.1 g/l protein). Where sample impurities should be simulated, higher levels of cell extract (6 g/l) were used instead (Figs. 3–6, 8, and Supplementary Fig. 2, 5, 7, 9–11). The labeling solution was prepared by mixing equimolar amounts of Cy5.5-RELASKDPGAFDADPLVVEI reagent (synthesized by Genscript; TFA salt; HPLC purity 95.6%; net peptide content 85.9%; molecular weight (2707.16) confirmed via NMR) and Connectase (5 µM each; buffer A without carrier protein). After 1 min at room temperature, this solution was diluted and mixed with the samples to be analyzed (final concentration: 5 nM). The reactions were incubated for 30 min at room temperature and transferred in a fresh tube with 1/4 vol. SDS loading buffer (250 mM Tris, 8% SDS, 0.1% bromophenol blue, 40% glycerol, pH 6.8). The samples were heat incubated (95 °C, 3 min) in some cases (Figs. 3–5, Supplementary Figs. 4 and 12; Note: this step is optional and can be skipped if heat incubation is not required to unfold the target proteins). The samples (5 µl each) were then separated with NuPAGE (Thermo) or mPAGE (Merck) 12% BisTris gels (50 mM MOPS, 50 mM Tris, 1 mM EDTA, 0.1% SDS, pH 7.7; 200 V constant). The gels were imaged immediately after the run with an Odyssey CLx fluorescence scanner (Licor; 700 nm channel, Intensity: Auto, focus offset: 0.5 mm, resolution: 84–337 µm, quality: lowest-medium). 32 bit images containing all fluorescence data (provided in the Source Data file) were generated with the instrument software (Image Studio 5.2.5), exported, and analyzed with ImageJ 1.52a using the Bio-Formats 6.11.0 plugin. For quantifications, the signal of the whole band, including potential smears or shadows was used. For a delayed/later analysis, the gels were stored in a fixation solution (50% methanol, 10% acetate, at 4 °C in the dark; no maximum fixation time). In some cases (Figs. 3 and 6), gels were stained after the fluorescence scan with Coomassie solution (5.8% H3PO4, 10% (NH4)2SO4, 0.12% Coomassie G-250, 20% Ethanol, 5% Methanol), de-stained (10% acetate), and re-imaged with the fluorescence scanner (same settings). Exceptions from this general procedure and details on each experiment are described in the following.
For the preparation of Fig. 3a, equal quantities of CnTagged proteins (125 fmol SdAb (Single domain Antibody), Ubiquitin (Ub), GroES, Glutathione-S-Transferase (GST), Ubiquitin-conjugating enzyme (E2), Ubiquitin-activating enzyme (E1), Heat-shock protein 20 kDa (Hsp20), Proteasome subunit Alpha (PsmA), Outer membrane phospholipase A1 (OmpLA) or Cyclophilin A (CyP)) in buffer A with cell extract (6 g/l) were visualized as described in the general procedure (see above). For Fig. 3b, various cell extracts were prepared. Spodoptera frugiperda SF9 (DMSZ no. ACC 125) and HEK293 cells (DMSZ no. ACC 305) were gifts from Dr. Birte Hernandez Alvarez; Pseudomonas fluorescens and Bacillus subtilis were cultured in LB at 30 °C up to OD 1.5; Sulfolobus solfataricus P2 cells were a gift from Dr. Jörg Martin. All cells were harvested by centrifugation, resuspended in RIPA buffer (supplemented with 0.02 g/l DNAse, cOmplete protease inhibitor, 5 mM MgCl2, and 5 mM TCEP), lysed by sonication, and centrifuged again to obtain the soluble cell extract fraction. The protein concentration was determined with the BCA method. Finally, 25 nM CnTagged E1 were mixed with 4 g/l of each cell extract and visualized as described in the general procedure (see above). The resulting gel showed higher protein quantities for SF9 and HEK293 fractions compared to the Sulfolobus fraction, in contrast to the quantities determined with the BCA method.
For Fig. 4, a serial dilution of three individual CnTagged proteins (SdAb, Ub, and GST) was generated, ranging from 50 nM to 50 pM (1.6379× steps; buffer A with cell extract (6 g/l)). These samples were mixed with 1/2 vol. labeling solution and visualized as described in the general procedure (see above). For analysis, the average signal of the 50 nM samples, corresponding to 125 fmol on the gel, was set as 100% signal.
For Fig. 5a, HEK293 cells expressing CnTagged proteins (Actin, SdAb, Ub) were harvested and lysed in RIPA buffer. The protein concentration was determined with Bicinchoninic acid (BCA) and a 10× serial dilution, starting with 2 g/l, was prepared. Likewise, for Fig. 5b, a 10× serial dilution (RIPA buffer with cell extract (6 g/l)) of purified CnTagged proteins (E1, GST, SdAb), starting with 4000 fmol/µl was prepared. All samples were labeled with 1/2 vol. labeling solution and visualized as described in the general procedure (see above).
For Fig. 6, two replicates of three competition experiments were performed. In each case, 1 vol. of a reference protein solution (50 nM SdAb in buffer A with cell extract (6 g/l)) was mixed with 1 vol. of protein of interest solution (2.590−2590 nM (Ub, Hsp20) or 1.581−1581 nM (GroES); 1.6379× steps; same buffer), labeled with 1 vol. of labeling solution, and visualized as described above (final quantities: 125 fmol SdAb; 6.474–6474 fmol Ub or Hsp20; 3.953–3953 fmol GroES (i.e., a shift by one lane (1.6379×) compared to Ub and Hsp20). The signal ratio between reference and protein of interest band intensities was determined with ImageJ and plotted against the protein of interest quantities (middle layer). k values were determined for signal ratio 0.1–10 based on Eq. (2) ([POI] = Signal ratio × [Ref]/k). The average of these values is shown in the chart and visualized as a linear curve. The percentile deviation between the POI quantities calculated with Eq. (2) and the actually used POI quantities was plotted against the signal ratio (lower layer).
For Supplementary Fig. 1, Connectase and of Cy5.5-RELASKDPGAFDADPLVVEI reagent were mixed as described above (5 µM each). At the indicated time points (1–1440 min), N-Cnt formation was stopped by transferring an aliquot to a fresh tube with 1/4 vol. SDS loading buffer. The samples were separated via SDS–PAGE. The resulting gel was imaged on a fluorescence scanner, before and after Coomassie staining. The ratio between the resulting bands in the Coomassie-stained gel was plotted against the incubation time.
For Supplementary Fig. 2B, 125 fmol CnTagged E1 protein in RIPA buffer with cell extract (6 g/l) was visualized as described in the general procedure (see above), except that the reaction was stopped at different times (1–1440 min) by transferring an aliquot to a fresh tube with 1/4 vol. SDS loading buffer. For Supplementary Fig. 2C, the reaction was performed with 1–125 fmol CnTagged E1 protein and stopped after 0.2–30 min.
For Supplementary Fig. 3, 1 fmol CnTagged E1 protein was visualized as described in the general procedure (see above), except that the reaction was performed in different buffers and stopped at different times (0.25–30 min) by transferring an aliquot to a fresh tube with 1/4 vol. SDS loading buffer. The chosen buffers were buffer A (labeled Std buffer in the figure), buffer A supplemented with 2–8 M urea, 10% DMSO or 2% SDS, or RIPA buffer.
For Supplementary Fig. 4A, samples containing 45 µM–45 pM CnTagged MBP and 1 g/l E. coli cell extract were prepared. Labeling was performed with 1/2 vol. labeling reagent (final concentration 5 nM) and stopped after 30 min by the addition of 1/2 vol. SDS loading buffer. 5 µl of each sample were analyzed on the gel. For Supplementary Fig. 4B, 10 µM–200 pM CnTagged Sumo was used instead of MBP.
For Supplementary Fig. 5, the procedure described in Fig. 6 was repeated, except for the use of different reference (Ub, E2, SdAb, E1) and target proteins (Ub, SdAb, E2, PA1732). The gels show POI quantities ranging in 1.6379× steps from 3.953 to 3953 fmol (POI: Ub/Ref: E2), 2.413–2413 fmol (SdAb/E2), 1.474–1474 (SdAb/Ub) 2.413–2413 fmol (E2/Ub) and 3.953–3953 fmol (E2/SdAb; E1/PA1732). In the case of Supplementary Fig. 5F, the labeling was performed in the presence of 4 M urea.
For Supplementary Fig. 7, a serial dilution of four individual CnTagged proteins (GST, SdAb, GroES, and Ub) was generated, ranging from 16 µM to 16 pM (\(\surd 10\) steps; buffer A with cell extract (6 g/l)). These samples were mixed with 1/2 vol. labeling solution. The labeling reaction was stopped after 30 min by transferring an aliquot to a fresh tube with 1/4 vol. SDS loading buffer. The samples with the same POI quantities (e.g., 16 µM) were then pooled and analyzed via in-gel fluorescence.
For Supplementary Fig. 9, a mixture of two CnTagged proteins (E1/PsmA or GroES/Ub; 125 fmol each in buffer A with cell extract (6 g/l)) was visualized as described in the general procedure (see above), except that the reaction was stopped at different times (1–1440 min) transferring an aliquot to a fresh tube with 1/4 vol. SDS loading buffer. The average k value from two experiments was determined with Eq. (3) and plotted for each time point.
For Supplementary Fig. 10, a mixture of two CnTagged proteins (OmpLA/E1; 125 fmol each in buffer A with cell extract (6 g/l)) was visualized as described in the general procedure (see above), except that the reaction buffer was supplemented with CaCl2 or EDTA (10 mM), FC-12 (2 mM) or cell extract (6 g/l)/BSA (0.1 g/l). The reaction temperature was set to either 10 °C or 22 °C. The k value for the OmpLA/E1 pair under each condition was determined with Eq. 3.
For Supplementary Fig. 11, a mixture of two CnTagged proteins (E1/PsmA, E2/Ub or SdAb/Ub) in buffer A with cell extract (6 g/l)) was visualized as described in the general procedure (see above), except that different quantities of CnTagged proteins (125–20,000 fmol) were used. The average k value from two experiments was determined with Eq. (3) and plotted against the protein quantities.
For Supplementary Fig. 12, 125 fmol CnTagged E1 was mixed with either 125 fmol CnTagged SdAb or different quantities of SdAb-expressing HEK293 cells (see Fig. 5a) and analyzed as described in the general procedure (see above).
Western blots
For Western blot analysis (Figs. 5, 8, Supplementary Fig. 7), the samples were prepared as described above (in-gel fluorescence assay, Figs. 5, 6 and Supplementary Fig. 7), except that cMyc-tagged proteins were used and that no labeling reaction was performed. In the case of Fig. 8, cMyc-tagged Hsp20 and E1 proteins were used instead of GroES and Ub (see main text). The samples were heat incubated (95 °C, 3 min), and separated with NuPAGE 12% BisTris gels (Thermo). The proteins were subsequently blotted to Invitrogen Power Blotter Select Nitrocellulose Transfer Stacks (Thermo), using the Invitrogen Power Blotter XL (25 V, 1.3 A, 5 min). The membrane was then blocked (PBST, 5% milk powder, filtered) for 1 h at room temperature and, in the next step, incubated with primary antibody solution (monoclonal mouse anti cMyc 9E10 antibody (Thermo, #13-2500, Lot VK307345; validation: https://www.thermofisher.com/antibody/product/c-Myc-Antibody-clone-9E10-Monoclonal/13-2500), diluted 1:500 (to 1 µg/ml) in PBST) for 16 h at 4 °C. After 5 wash steps (PBST, 5 min each), the blot was incubated with secondary antibody (IRDye 680RD goat anti-mouse antibody (Licor, #926-68070, Lot D10512-15), diluted 1:15000 in PBST). After another five wash steps (PBST, 5 min each), the blot was imaged with an Odyssey CLx fluorescence scanner (Licor). Data analysis was performed as described in the in-gel fluorescence section.
AlphaFold model
For Fig. 1, an AlphaFold2 model of a complex between M. mazei Connectase and M. mazei recognition sequence (RELASKDPGAFDADPLVVEI) was generated. This was done by gathering and aligning all available Connectase sequences from Methanosarcinales and Methanomicrobiales. The sequences were trimmed to the length of the M. mazei variant. A GSGSGSG linker was added to the C-termini, as well as a region of the MtrA sequence from each organism. This region included the KDPGA motif and 15 residues N- and C-terminal of that motif. The structure of the M. mazei sequence within this dataset was then predicted with AlphaFold2, using the other sequences as a custom alignment for the process. For this, the Colab AlphaFold implementation with Jackhmmer (available under https://colab.research.google.com/github/sokrypton/ColabFold/blob/main/beta/AlphaFold_wJackhmmer.ipynb#scrollTo=pc5-mbsX9PZC) was used with standard settings. The best-scoring model from this prediction was in good agreement with the known co-structure of the respective M. jannaschii complex (PDB: “6ZW0”). It is shown in Fig. 1, without the linker and without 10 residues N-terminal of said MtrA region. (Note: The more conventional approach, i.e., the prediction of the complex from two separate protein chains, resulted in unconvincing models.)
Statistics and reproducibility
No statistical method was used to predetermine the sample size. Three independent experiments (n = 3) were performed for the preparation of Figs. 4 and 8. Two independent experiments (n = 2) were performed for the preparation of Figs. 6 and S9 and S11. The experiments shown in Figs. 3, 5, S1, S2, S3, S4, S5, S10, S12 were performed only once. Although no exact replicates were made in these cases, the results are in agreement with a multitude of similar experiments used to develop the in-gel fluorescence method, including nearly identical precursor experiments. No data were excluded from the analyses. The experiments were not randomized. The investigators were not blinded to allocation during experiments and outcome assessment.
Reporting summary
Further information on research design is available in the Nature Portfolio Reporting Summary linked to this article.
Data availability
Source data are provided with this paper. The primary data have also been deposited in the Mendeley public repository (https://data.mendeley.com/datasets/3n47z3g33b). The crystal structure data used in this study are available in the PDB database under accession code “6ZW0”. Source data are provided with this paper.
Material availability
We freely distribute the materials required to perform the assays in this paper. The kits include Cy5.5-conjugated peptides (100 µg; sufficient for thousands of gels), plasmids for bacterial expression of Connectase, and a reference protein. Purified Connectase and reference proteins are also available. We appreciate feedback to further improve the method.
References
Janes, K. A. An analysis of critical factors for quantitative immunoblotting. Sci Signal 8, rs2 https://doi.org/10.1126/scisignal.2005966 (2015).
Mishra, M., Tiwari, S. & Gomes, A. V. Protein purification and analysis: next generation Western blotting techniques. Expert Rev. Proteom. 14, 1037–1053 (2017).
Gilda, J. E. et al. Western blotting inaccuracies with unverified antibodies: need for a Western Blotting Minimal Reporting Standard (WBMRS). PLoS ONE 10, e0135392 (2015).
Pillai-Kastoori, L., Schutz-Geschwender, A. R. & Harford, J. A. A systematic approach to quantitative Western blot analysis. Anal Biochem. 593, 113608 https://doi.org/10.1016/j.ab.2020.113608 (2020).
Kroon, C. et al. Blind spots on western blots: assessment of common problems in western blot figures and methods reporting with recommendations to improve them. PLoS Biol 20, e3001783 (2022).
Koller, A. & Watzig, H. Precision and variance components in quantitative gel electrophoresis. Electrophoresis 26, 2470–2475 (2005).
Butler, T. A. J., Paul, J. W., Chan, E. C., Smith, R. & Tolosa, J. M. Misleading Westerns: common quantification mistakes in Western Blot densitometry and proposed corrective measures. Biomed. Res. Int. 2019, 5214821 (2019).
Baker, M. Reproducibility crisis: blame it on the antibodies. Nature 521, 274–276 (2015).
Takemura, M., Lu, Y. S., Nakato, E. & Nakato, H. Endogenous epitope tagging of a JAK/STAT ligand Unpaired1 in Drosophila. MicroPubl Biol. https://doi.org/10.17912/micropub.biology.000387 (2021).
Kim, J. S., Bonifant, C., Bunz, F., Lane, W. S. & Waldman, T. Epitope tagging of endogenous genes in diverse human cell lines. Nucleic Acids Res. 36, e127 (2008).
Pandey, S., Roy, D. & Shukla, A. K. Measuring surface expression and endocytosis of GPCRs using whole-cell ELISA. Methods Cell Biol. 149, 131–140 (2019).
Oh-Hashi, K., Furuta, E., Fujimura, K. & Hirata, Y. Application of a novel HiBiT peptide tag for monitoring ATF4 protein expression in Neuro2a cells. Biochem. Biophys. Rep. 12, 40–45 (2017).
Raducanu, V. S., Isaioglou, I., Raducanu, D. V., Merzaban, J. S. & Hamdan, S. M. Simplified detection of polyhistidine-tagged proteins in gels and membranes using a UV-excitable dye and a multiple chelator head pair. J. Biol. Chem. 295, 12214–12223 (2020).
Bruchert, S., Joest, E. F., Gatterdam, K. & Tampe, R. Ultrafast in-gel detection by fluorescent super-chelator probes with HisQuick-PAGE. Commun. Biol. 3, 138 (2020).
Schmidt, M., Toplak, A., Quaedflieg, P. J. & Nuijens, T. Enzyme-mediated ligation technologies for peptides and proteins. Curr. Opin. Chem. Biol. 38, 1–7 (2017).
Fuchs, A. C. D. et al. Archaeal Connectase is a specific and efficient protein ligase related to proteasome β subunits. Proc. Natl Acad. Sci. USA 118, e2017871118 (2021).
Xiao, Q., Zhang, F., Nacev, B. A., Liu, J. O. & Pei, D. Protein N-terminal processing: substrate specificity of Escherichia coli and human methionine aminopeptidases. Biochemistry 49, 5588–5599 (2010).
Solan, R., Pereira, J., Lupas, A. N., Kolodny, R. & Ben-Tal, N. Gram-negative outer-membrane proteins with multiple beta-barrel domains. Proc. Natl Acad. Sci. USA 118, e2104059118 (2021).
Wang, Y. V. et al. Quantitative analyses reveal the importance of regulated Hdmx degradation for p53 activation. Proc. Natl Acad. Sci. USA 104, 12365–12370 (2007).
Mathews, S. T., Plaisance, E. P. & Kim, T. Imaging systems for westerns: chemiluminescence vs. infrared detection. Methods Mol. Biol. 536, 499–513 (2009).
Taylor, S. C., Rosselli-Murai, L. K., Crobeddu, B. & Plante, I. A critical path to producing high quality, reproducible data from quantitative western blot experiments. Sci. Rep. 12, 17599 (2022).
Schuchner, S., Behm, C., Mudrak, I. & Ogris, E. The Myc tag monoclonal antibody 9E10 displays highly variable epitope recognition dependent on neighboring sequence context. Sci. Signal. 13, eaax9730 (2020).
Fan, H., Villegas, C., Chan, A. K. & Wright, J. A. Myc-epitope tagged proteins detected with the 9E10 antibody in immunofluorescence and immunoprecipitation assays but not in western blot analysis. Biochem. Cell Biol. 76, 125–128 (1998).
Debeljak, N., Feldman, L., Davis, K. L., Komel, R. & Sytkowski, A. J. Variability in the immunodetection of His-tagged recombinant proteins. Anal. Biochem. 359, 216–223 (2006).
Chen, H. M., Ahsan, S. S., Santiago-Berrios, M. B., Abruna, H. D. & Webb, W. W. Mechanisms of quenching of Alexa fluorophores by natural amino acids. J. Am. Chem. Soc. 132, 7244–+7245 (2010).
Ghosh, R., Gilda, J. E. & Gomes, A. V. The necessity of and strategies for improving confidence in the accuracy of western blots. Expert Rev. Proteom. 11, 549–560 (2014).
Fuchs, A. C. D., Alva, V. & Lupas, A. N. An astonishing wealth of new proteasome homologs. Bioinformatics https://doi.org/10.1093/bioinformatics/btab558 (2021).
Fuchs, A. C. D. et al. The architecture of the Anbu complex reflects an evolutionary intermediate at the origin of the proteasome system. Structure 25, 834–845.e835 (2017).
Acknowledgements
We thank Andrei Lupas for discussions and continuous support. We thank Birte Hernandez-Alvarez for handling the eukaryotic cell cultures and providing CnTagged OmpLA protein. We also thank Victoria Sanchez (Core facility, MPI for Biochemistry, Martinsried) and Dai Long Vu (MPI for Biology, Tübingen) for mass spectrometric analyses. This work was supported by institutional funds from the Max Planck Society and by the German Research Foundation (DFG project number 512378754 to A.C.D.F.).
Funding
Open Access funding enabled and organized by Projekt DEAL.
Author information
Authors and Affiliations
Contributions
A.C.D.F. designed, performed, and analyzed all experiments and wrote the paper.
Corresponding author
Ethics declarations
Competing interests
Max Planck Innovation has filed a provisional patent on Connectase and its use for enzymatic ligation (EP-Patent Application 20807419; Inventors: Dr. Adrian Fuchs, Dr. Marcus Hartmann, and Dr. Moritz Ammelburg). The application covers all aspects of this work. The author declares no other competing interests.
Peer review
Peer review information
Nature Communications thanks Aldrin Gomes, and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Source data
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Fuchs, A.C.D. Specific, sensitive and quantitative protein detection by in-gel fluorescence. Nat Commun 14, 2505 (2023). https://doi.org/10.1038/s41467-023-38147-8
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-023-38147-8
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.