Correction to: npj Flexible Electronics https://doi.org/10.1038/s41528-021-00111-1, published online 7 July 2021
The original version of this Article omitted from the author list the 3rd author Pawel Jerzy Wojcik from redoxme AB, Research & Development Department, Norrköping, Sweden (Affiliation #3) and 7th author Peter Dyreklev from RISE Research Institutes of Sweden, Norrköping, Sweden (Affiliation #1).
Consequently, the following was added to the affiliation list: 3redoxme AB, Research & Development Department, Norrköping, Sweden.
Additionally, the Author Contributions has been updated: ‘P.J.W. and P.D. conceived the original idea of the project. S.M. formulated the curing ink, carried out the inkjet printing, electrical and optical characterizations, interpreted the data, and wrote the manuscript through the contributions of all authors. M.K. carried out the Zn ink formulation and rheology measurements at the initial stage of the project, which was followed by A.S. at the later stage. N.H.A. performed the SEM, EDX, and FTIR measurements. Y.M. assisted in designing the test structures and designed and fabricated the demonstrator circuits. V.B. contributed to the interpretation of different data and discussions. All works were coordinated by D.N. All authors have approved the final version of the manuscript.’
This has been corrected in both the PDF and HTML versions of the Article.
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Majee, S., Karlsson, M.C.F., Wojcik, P.J. et al. Author Correction: Low temperature chemical sintering of inkjet-printed Zn nanoparticles for highly conductive flexible electronic components. npj Flex Electron 5, 32 (2021). https://doi.org/10.1038/s41528-021-00129-5
Published:
DOI: https://doi.org/10.1038/s41528-021-00129-5