Abstract
No-cloning theorem forbids perfect cloning of an unknown quantum state. A universal quantum cloning machine (UQCM), capable of producing two copies of any input qubit with the optimal fidelity, is of fundamental interest and has applications in quantum information processing. This is enabled by delicately tailored nonclassical correlations between the input qubit and the copying qubits, which distinguish the UQCM from a classical counterpart, but whose experimental demonstrations are still lacking. We here implement the UQCM in a superconducting circuit and investigate these correlations. The measured entanglements well agree with our theoretical prediction that they are independent of the input state and thus constitute a universal quantum behavior of the UQCM that was not previously revealed. Another feature of our experiment is the realization of deterministic and individual cloning, in contrast to previously demonstrated UQCMs, which either were probabilistic or did not constitute true cloning of individual qubits.
Similar content being viewed by others
Introduction
An unknown quantum state cannot be cloned perfectly due to the linearity associated with the unitary transformation of quantum mechanics. This feature, discovered by Wooters and Zurek in 1982 and known as the no-cloning theorem1, represents one of the fundamental differences between quantum information and classical information. In particular, it ensures the security of quantum cryptography schemes2,3,4.
Because of the impossibility of perfect quantum cloning, much attention has been paid to the possibility of producing copies close to the original states. In the seminal paper by Buzek and Hillery, a universal quantum cloning machine (UQCM) was proposed, which produces two identical approximate copies via controllably entangling them with the original qubit5. The output state of each of these two copy qubits has a fidelity of 5/6 to the input state, which is independent of the input state and was proven to be optimal6,7. Besides fundamental interest, quantum cloning can be used to improve the performance of some quantum computational tasks8, to distribute quantum information, and to realize minimal disturbance measurements9. The UQCM has been reported in nuclear magnetic resonance systems10,11, but the true cloning of individual quantum systems cannot be achieved due to the ensemble aspect. Huang et al. presented a proof-of-principle demonstration in an optical system12, where only a single photon was involved; its polarization state was copied onto one path freedom degree.
Several optical experiments have been reported, where the state of a photon was copied onto another photon13,14,15,16,17, but the cloning processes are probabilistic for lack of a deterministic two-qubit controlled gate between different photons in these experiments.
Besides the limitation of ensemble aspect or probabilistic nature, previous experiments did not reveal the nonclassical correlations between the original input qubit and the copying qubits. These correlations enable the information carried by the input state to be equally imprinted on the clones with the optimal fidelity and represent the most fundamental difference between the UQCM and a classical cloning machine. Quantitative characterization of these correlations is important for revealing the genuine quantum behavior of the UQCM, which is closely related to the universality and optimality of the copying operation.
We here adapt a scheme proposed in the context of cavity quantum electrodynamics (QED)18 to a superconducting circuit involving Xmon qubits controllably coupled to a bus resonator. The high degree of control over the qubit–qubit interactions enables realizations of all gate operations required for approximately cloning the state of each qubit in a deterministic way. We indicate the universality of the implemented UQCM and quantitatively characterize the entanglement between the input qubit and each of the copy qubits. The results confirm our theoretical prediction that this entanglement is also input state independent and represents a universal quantum feature of the UQCM. The entanglement between the two copy qubits is also measured.
Results
Implementation of UQCM
The sample used to perform the experiment involves five Xmon qubits19, three of which are employed in our experiment and labeled from Q1 to Q3; these qubits are almost symmetrically coupled to a central bus resonator, as sketched in Fig. 1a. The resonator has a fixed frequency of ωr/2π = 5.588 GHz, while the frequencies of the qubits are individually adjustable, which enables us to tailor the system dynamics to accomplish the copying task. The Hamiltonian for the total system is
where a† and a are the photonic creation and annihilation operators for the resonator, respectively, \({S}_{j}^{+}=\left|{1}_{j}\right\rangle \left\langle {0}_{j}\right|\) and \({S}_{j}^{-}=\left|{0}_{j}\right\rangle \left\langle {1}_{j}\right|\) are the flip operators for Qj, with \(\left|{0}_{j}\right\rangle\) and \(\left|{1}_{j}\right\rangle\) being its ground and first excited states separated by an energy gap \(\hbar\)ωq,j, gj are the corresponding qubit–resonator coupling strengths, and \(\hbar\) is the reduced Planck constant. In our sample, these coupling strengths are almost identical, e.g., gj ≃ g ≃ 2π × 20 MHz. The system parameters are detailed in Supplementary Note 3. The qubit frequency tunability makes the system dynamics programable.
When two or more qubits are detuned from the resonator by the same amount much larger than g, they are coupled by virtual photon exchange20,21,22,23,24,25,26,27,28,29,30. In our experiment, Q1 acts as the original qubit whose state is to be cloned, and Q2 and Q3 are used as the copying qubits.
The experimental sequence for realizing the UQCM with our set-up is shown in Fig. 1b. The experiment starts with initializing the resonator to the vacuum state \(\left|{0}_{r}\right\rangle\) and the qubits to their ground state \(\left|{0}_{1}{0}_{2}{0}_{3}\right\rangle\) at their idle frequencies. These idle frequencies are highly detuned from the resonator frequency and off-resonant with each other, ensuring each qubit to be effectively decoupled from the resonator and other qubits when staying at its idle frequency. After the initialization, a suitable rotation is applied to Q1 to prepare it in the state to be cloned
where α and β are complex numbers, satisfying \({\left|\alpha \right|}^{2}+{\left|\beta \right|}^{2}=1\). Prior to the copying operation, we have to prepare Q2 and Q3 in the entangled state \(|{\psi }_{2,3}^{+}\rangle =(|{1}_{2}{0}_{3}\rangle +|{0}_{2}{1}_{3}\rangle )/\sqrt{2}\). To prepare this state, we first transform Q3 to the excited state \(\left|{1}_{3}\right\rangle\) by a π rotation Xπ and then tune Q2 and Q3 to the working frequency ωw/2π = 5.44 GHz. With this setting, the resonator will not exchange photons with the qubits and remain in the ground state due to the large detuning but can mediate energy swapping between the two qubits20. After a duration of 57.7 ns, a \(\sqrt{i\,\text{SWAP}\,}\) gate is realized, which evolves these two qubits to the state \(({{\rm{e}}}^{i\theta }\left|{1}_{2}{0}_{3}\right\rangle +\left|{0}_{2}{1}_{3}\right\rangle )/\sqrt{2}\), where θ = π/2 + θd, with θd being the extra dynamical phase accumulated during the frequency tuning process. To cancel the phase θ, Q3 is tuned to the frequency 5.311 GHz, where the rotation \({R}_{\theta }^{z}={{\rm{e}}}^{i\theta \left|{1}_{3}\right\rangle \left\langle {1}_{3}\right|}\) is realized after a duration of 30 ns.
After the production of \(|{\psi }_{2,3}^{+}\rangle\), Q2 and Q3 are tuned on resonance with Q1 at the working frequency, where these qubits are red-detuned from the resonator by the same amount Δ = 2π × 148 MHz. With this setting, the resonator does not exchange photons with the qubits due to the large detuning but can mediate a coupling of strength λ = g2/Δ between any two of these qubits. The resonator will remain in the ground state during this process and can be discarded in the description of the system dynamics. In the interaction picture, the state evolution of the qubits is governed by the effective Hamiltonian20,21
Under this Hamiltonian, Q2 and Q3 symmetrically interact with Q1 through excitation exchange, with the number of the total excitations being conserved. After an interaction time τ = 2π/9λ, the three-qubit coupling C1,2,3 evolves Q1, Q2, and Q2 to the entangled state
Then Q1 is tuned back to its idle frequency of 5.367 GHz and decoupled from Q2 and Q3, which remain at the working frequency and continue to interact with each other. The state components \(\left|{0}_{2}\right\rangle \left|{0}_{3}\right\rangle\) and \(\left|{1}_{2}\right\rangle \left|{1}_{3}\right\rangle\) are eigenstates of the two-qubit interaction Hamiltonian \({H}_{\,\text{e}\,}^{{\,}^{\prime}}=-\lambda \left({S}_{2}^{+}{S}_{3}^{-}+{S}_{2}^{-}{S}_{3}^{+}\right)\) with the zero eigenvalue, while \(\left|{\psi }_{2,3}^{+}\right\rangle\) is an eigenstate of \({H}_{\,\text{e}\,}^{{\,}^{\prime}}\) with the eigenvalue of −λ. As a result, this swapping interaction does not affect \(\left|{0}_{2}\right\rangle \left|{0}_{3}\right\rangle\) and \(\left|{1}_{2}\right\rangle \left|{1}_{3}\right\rangle\) but produces a phase shift \(\lambda {\tau }^{{\,}^{\prime}}\) to \(\left|{\psi }_{2,3}^{+}\right\rangle\), with \({\tau }^{{\,}^{\prime}}\) being the interaction time. With the choice \({\tau }^{{\,}^{\prime}}=\pi /3\lambda\), the two-qubit coupling C2,3 cancels the phase factor e−iπ/3 associated with \(\left|{\psi }_{2,3}^{+}\right\rangle\), evolving the three qubits to18
where the phase ϕ is due to the frequency shift of Q1 during the Q2–Q3 interaction, which does not affect the reduced density matrices for both Q2 and Q3, each of which in the basis \(\left\{\left|0\right\rangle ,\left|1\right\rangle \right\}\) is given by
For the perfect UQCM, the fidelity of these two output copiers with respect to the input state \(\left|{\psi }_{\text{in}}\right\rangle\) is 5/6, irrespective of the probability amplitudes α and β associated with the components \(\left|0\right\rangle\) and \(\left|1\right\rangle\). Due to the nonuniform qubit–resonator couplings and the existence of the direct but also nonuniform qubit–qubit couplings in our device26,27,28,29,30, each qubit is asymmetrically coupled to the other two qubits with the effective coupling strengths slightly different from λ. In order to produce the optimal outcome, the coupling operations C123 and C23 are calibrated simultaneously, and consequently, the optimal coupling times τ and \({\tau }^{\prime}\) that deviate from the values for the ideal case are 40.8 and 69.5 ns, respectively. After the copy process, Q2 and Q3 are tuned back to their idle frequencies of 5.223 and 5.311 GHz, respectively.
Characterization of performance
We characterize the performance of the UQCM by preparing different input states {\(\left|{0}_{1}\right\rangle\), \(\left(\left|{0}_{1}\right\rangle +i\left|{1}_{1}\right\rangle \right)/\sqrt{2}\), \(\left(\left|{0}_{1}\right\rangle -i\left|{1}_{1}\right\rangle \right)/\sqrt{2}\), \(\left(\left|{0}_{1}\right\rangle +\left|{1}_{1}\right\rangle \right)/\sqrt{2}\), \(\left(\left|{0}_{1}\right\rangle -\left|{1}_{1}\right\rangle \right)/\sqrt{2}\), \(\left|{1}_{1}\right\rangle\)} and measuring the corresponding output states of Q2 and Q3 through quantum state tomography (see Supplementary Note 7). Note that, for the tomography in our experiment, the readout calibration is performed to correct the measured probabilities for the qubit states according to the qubits’ \(\left|0\right\rangle\) and \(\left|1\right\rangle\) state measurement fidelities (see Supplementary Table 1 and Note 6). The measured density matrices for the clones of the above-mentioned six input states are respectively displayed in Fig. 2a–f, where the upper and lower panels denote the measured output density matrices of Q2 and Q3, respectively. The fidelities of the output states of Q2 (Q3) to these six ideal input states, defined as \(F=\left\langle {\psi }_{\text{in}}\right|{\rho }_{\text{out}}\left|{\psi }_{\text{in}}\right\rangle\), are, respectively, 0.784 ± 0.002 (0.824 ± 0.002), 0.786 ± 0.001 (0.818 ± 0.003), 0.784 ± 0.002 (0.832 ± 0.002), 0.788 ± 0.002 (0.831 ± 0.001), 0.786 ± 0.002 (0.832 ± 0.001), and 0.785 ± 0.002 (0.832 ± 0.001), where ρout denotes the measured density matrix for the corresponding output clone. Each of these fidelities is close to the optimal value 5/6, confirming that the performance of the UQCM is independent of the input state. The slight difference between the output states of the two copy qubits is mainly due to direct qubit–qubit couplings. These nonuniform couplings also make the qualities of the output states slightly depend on the input state. We note that, for each of the six input states, the output state of Q3 has a fidelity very close to the theoretical upper bound. This is partly due to the asymmetry between the two clones. The other reason is that the qubit–qubit couplings during the copy process partly protect the qubits from dephasing, so that the real T2 times of the qubits coupled at the working frequency are longer than the corresponding results listed in Supplementary Table 1, which are measured without qubit–qubit couplings27,28.
To further examine the performance of the UQCM, we perform the quantum process tomography (see Supplementary Note 7), achieved by preparing the above-mentioned six distinct input states, and measuring them and the corresponding output states of Q2 and Q3 through quantum state tomography. The measured process matrices associated with the output states of Q2 and Q3, χmeas,2 and χmeas,3, are presented in Fig. 3a, b, respectively. The fidelities of χmeas,2 and χmeas,3 with respect to the ideal cloning process χid, defined as \(F=Tr\left({\chi }_{\text{meas}}{\chi }_{\text{id}}\right)\), are 0.679 ± 0.001 and 0.743 ± 0.002, respectively. These process fidelities are close to the result of the perfect UQCM, 0.75, demonstrating a good quantum control over the multiqubit–resonator system.
Demonstration of universal entanglement behavior
The nonclassical correlations between the original input qubit and the clones play an essential role in implementation of the UQCM and represents one of the most fundamental differences between universal quantum and classical cloning but have not been quantitatively investigated. Characterization of these correlations is important for understanding the quantum behavior of the UQCM. We find that the degree of the entanglement between each output clone and the original input qubit, quantified by concurrence31, is 2/3 for an ideal UQCM, which is independent of the input state (see Supplementary Note 1). To detect these nonclassical correlations, we respectively measure the joint Q1–Q2 and Q1–Q3 output density matrices. The results for the six input states {\(\left|{0}_{1}\right\rangle\), \(\left(\left|{0}_{1}\right\rangle +i\left|{1}_{1}\right\rangle \right)/\sqrt{2}\), \(\left(\left|{0}_{1}\right\rangle -i\left|{1}_{1}\right\rangle \right)/\sqrt{2}\), \(\left(\left|{0}_{1}\right\rangle +\left|{1}_{1}\right\rangle \right)/\sqrt{2}\), \(\left(\left|{0}_{1}\right\rangle -\left|{1}_{1}\right\rangle \right)/\sqrt{2}\), \(\left|{1}_{1}\right\rangle\)} are displayed in Fig. 4a–f, where the upper and lower panels correspond to the joint Q1–Q2 and Q1–Q3 output density matrices, respectively. For clarity of display, a single-qubit z-axis rotation is numerically applied to cancel the extra phase produced by the qubits’ frequency shift, which does not affect the entanglement. The output Q1–Q2 concurrences associated with these six input states are 0.667 ± 0.008, 0.557 ± 0.005, 0.554 ± 0.006, 0.556 ± 0.007, 0.569 ± 0.007, and 0.590 ± 0.008, while the corresponding output Q1–Q3 concurrences are 0.565 ± 0.011, 0.453 ± 0.008, 0.457 ± 0.005, 0.468 ± 0.005, 0.459 ± 0.007, and 0.511 ± 0.006, respectively. As a nonzero concurrence indicates the existence of entanglement, these results unambiguously demonstrate that each of the two copy qubits is highly entangled with the original qubit, and the two copy qubits are also entangled. When the original qubit is traced out, the concurrence between the two copy qubits is 1/3 for an ideal UQCM (see Supplementary Note 1), which is also input state independent32. To verify this entanglement, we perform the joint Q2–Q3 output state tomography. The reconstructed joint Q2–Q3 density matrices for the six input states are displayed in Supplementary Note 5. The Q2–Q3 concurrences associated with these six measured density matrices are 0.236 ± 0.012, 0.076 ± 0.007, 0.076 ± 0.006, 0.079 ± 0.007, 0.088 ± 0.005, and 0.180 ± 0.010, respectively. These results indicate that for the input superposition state the output Q2–Q3 entanglement is much more affected by the decoherence effect compared to the case with input \(\left|{0}_{1}\right\rangle\) or \(\left|{1}_{1}\right\rangle\) state. This can be interpreted as follows. Since the direct couplings between the qubits are asymmetric, after the copy process, different state components of the final three-qubit state will accumulate different phases. For each input superposition state, the Q2–Q3 concurrence on these phases is a cosine function of these phases, which is very different from the modulation of the fidelity of the output state of each copy qubit (see Supplementary Note 2). With the present system parameters, the value of the modulation function of the Q2–Q3 concurrence is much smaller than that of the fidelity of the output state of each copy qubit, which approximates to the maximum. Consequently, the output Q2–Q3 entanglement for the input superposition state is much smaller than that for the input \(\left|0\right\rangle\) or \(\left|1\right\rangle\) state, while the output state fidelity of each qubit is almost input state independent. The existence of concurrence between any two of the three qubits confirm that they are in a genuine three-particle entangled state, revealing the fundamental difference between a quantum cloning process and a classical one.
Discussion
We have demonstrated universal cloning of an arbitrary state of an individual qubit with a circuit QED set-up, where all the quantum operations necessary for constructing a UQCM network are deterministically realized. We characterize the performance of the UQCM by quantum state tomography, confirming the universality of the copying process. We measure the entanglement between each copy qubit and the original qubit, with the results being in well agreement with the theoretical prediction that this entanglement is input state independent and represents a universal quantum behavior of the UQCM. We further measure the entanglement between the two clones, verifying the existence of true three-particle entanglement at the output. These results underline the fact that the universal entanglement behavior underlies the performance of the UQCM.
Data availability
All data needed to evaluate the conclusions in the paper are present in the paper and/or the Supplementary Materials. Additional data related to this paper may be requested from the authors.
Code availability
All codes used in the paper are available from the corresponding authors upon reasonable request.
References
Wootters, W. K. & Zurek, W. H. A single quantum cannot be cloned. Nature 299, 802–803 (1982).
Gisin, N., Ribordy, G., Tittel, W. & Zbinden, H. Quantum crytography. Rev. Mod. Phys. 74, 145–195 (2002).
Scarani, V., Iblisdir, S., Gisin, N. & Acín, A. Quantum cloning. Rev. Mod. Phys. 77, 1225–1256 (2005).
Fan, H. et al. Quantum cloning machines and the applications. Phys. Rep. 544, 241–322 (2014).
Bužek, V. & Hillery, M. Quantum copying: beyond the no-cloning theorem. Phys. Rev. A 54, 1844–1852 (1996).
Gisin, N. & Massar, S. Optimal quantum cloning machines. Phys. Rev. Lett. 79, 2153–2156 (1997).
Bruβ, D. et al. Optimal universal and state-dependent quantum cloning. Phys. Rev. A 57, 2368–2378 (1998).
Galvão, E. F. & Hardy, L. Cloning and quantum computation. Phys. Rev. A 62, 022301 (2000).
Ricci, M. et al. Separating the classical and quantum information via quantum cloning. Phys. Rev. Lett. 95, 090504 (2005).
Cummins, H. K. et al. Approximate quantum cloning with nuclear magnetic resonance. Phys. Rev. Lett. 88, 187901 (2002).
Du, J. et al. Experimental quantum cloning with prior partial information. Phys. Rev. Lett. 94, 040505 (2005).
Huang, Y. H. et al. Optical realization of universal quantum cloning. Phys. Rev. A 64, 012315 (2001).
Linares, A. L., Simon, C., Howell, J. C. & Bouwmeester, D. Experimental quantum cloning of single photons. Science 296, 712–714 (2002).
Fasel, S., Gisin, N., Ribordy, G., Scarani, V. & Zbinden, H. Quantum cloning with an optical fiber amplifier. Phys. Rev. Lett. 89, 107901 (2002).
Ricci, M., Sciarrino, F., Sias, C. & Martini, F. D. Teleportation scheme implementing the universal optimal quantum cloning machine and the universal NOT gate. Phys. Rev. Lett. 92, 047901 (2004).
Irvine, W. T. M., Lamas-Linares, A., Dood, M. J. Ade & Bouwmeester, D. Optimal quantum cloning on a beam splitter. Phys. Rev. Lett. 92, 047902 (2004).
Nagali, E. et al. Optimal quantum cloning of orbital angular momentum photon qubits through Hong-Ou-Mandel coalescence. Nat. Photon. 3, 720–723 (2009).
Zou, X., Pahlke, K. & Mathis, W. Scheme for the implementation of a universal quantum cloning machine via cavity-assisted atomic collisions in cavity QED. Phys. Rev. A 67, 024304 (2003).
Song, C. et al. Continous-variable geometric phase and its manipulation for quantum computation in a superconducting circuit. Nat. Commun. 8, 1061 (2017).
Zheng, S. B. & Guo, G. C. Efficient scheme for two-atom entanglement and quantum information processing in cavity QED. Phys. Rev. Lett. 85, 2392–2395 (2000).
Zheng, S. B. One-step synthesis of multiatom Greenberger-Horne-Zeilinger states. Phys. Rev. Lett. 87, 230404 (2001).
Zheng, S. B., Yang, C. P. & Nori, F. Arbitrary control of coherent dynamics for distant qubits in a quantum network. Phys. Rev. A 82, 042327 (2010).
Osnaghi, S. et al. Coherent control of an atomic collision in a cavity. Phys. Rev. Lett. 87, 037902 (2001).
Fedorov, A., Steffen, L., Baur, M. & Wallraff, A. Implementation of a Toffoli gate with superconducting circuits. Nature 481, 170–172 (2012).
Reed, M. D. et al. Realization of three-qubit quantum error correction with superconducting circuits. Nature 482, 382–385 (2012).
Zhong, Y. P. et al. Emulating anyonic fractional statistical behavior in a superconducting quantum circuit. Phys. Rev. Lett. 117, 110501 (2016).
Song, C. et al. 10-qubit entanglement and parallel logic operations with a superconducting circuit. Phys. Rev. Lett. 119, 180511 (2017).
Xu., K. et al. Emulating many-body localization with a superconducting quantum processor. Phys. Rev. Lett. 120, 050507 (2018).
Ning, W. et al. Deterministic entanglement swapping in a superconducting circuit. Phys. Rev. Lett. 123, 060502 (2019).
Song, C. et al. Generation of multicomponent atomic Schrödinger cat states of up to 20 qubits. Science 365, 574–577 (2019).
Wootters, W. K. Entanglement of formation of an arbitrary state of two qubits. Phys. Rev. Lett. 80, 2245–2248 (1998).
Buzek, V., Braunstein, S. L., Hillery, M. & Bruβ, D. Quantum copying: a network. Phys. Rev. A 56, 3446–3452 (1997).
Acknowledgements
We thank Haohua Wang at Zhejiang University fortechnical support. This work was supported by the National Natural Science Foundation of China (Grant No. 11674060, No. 11874114, No. 11875108, No. 11934018, No. 11904393, and No. 92065114), the Strategic Priority Research Program of Chinese Academy of Sciences (Grant No. XDB28000000), and the Natural Science Foundation of Fujian Province under Grant No. 2018J01412.
Author information
Authors and Affiliations
Contributions
S.-B.Z. conceived the experiment. Z.-B.Y., P.-R.H., X.-J.H., and K.X. performed the experiment and analyzed the data with the assistance of W.N. H.L. and D.Z. provided the devices used for the experiment. S.-B.Z., Z.-B.Y., K.X., and H.F. wrote the manuscript with feedbacks from all the authors.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Yang, ZB., Han, PR., Huang, XJ. et al. Experimental demonstration of entanglement-enabled universal quantum cloning in a circuit. npj Quantum Inf 7, 44 (2021). https://doi.org/10.1038/s41534-021-00375-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41534-021-00375-5
This article is cited by
-
Entanglement-interference complementarity and experimental demonstration in a superconducting circuit
npj Quantum Information (2023)