Abstract
Schizophyllan (SCH) is a high molecular weight homopolysaccharide composed of a β-(1,3)-D-glucan main chain with branching β-(1,6)-bound D-glucose residues. It forms triple helices that are highly stable towards heat and extreme pH, which provides SCH with interesting properties for industrial and medical applications. The recombinant anti-SCH antibody JoJ48C11 recognizes SCH and related β-(1,6)-branched β-(1,3)-D-glucans, but details governing its specificity are not known. Here, we fill this gap by determining crystal structures of the antigen binding fragment (Fab) of JoJ48C11 in the apo form and in complex with the unbranched β-(1,3)-D-glucose hexamer laminarihexaose 3.0 and 2.4 Å resolution, respectively. Together with docking studies, this allowed construction of a JoJ48C11/triple-helical SCH complex, leading to the identification of eight amino acid residues of JoJ48C11 (Tyr27H, His35H, Trp47H, Trp100H, Asp105H; Asp49L, Lys52L, Trp90L) that contribute to the recognition of glucose units from all three chains of the SCH triple helix. The importance of these amino acids was confirmed by mutagenesis and ELISA-based analysis. Our work provides an explanation for the specific recognition of triple-helical β-(1,6)-branched β-(1,3)-D-glucans by JoJ48C11 and provides another structure example for anti-carbohydrate antibodies.
Similar content being viewed by others
Introduction
Schizophyllan (SCH) is a homopolysaccharide produced by the basidiomycete Schizophyllum commune1. It is composed of a β-(1,3)-D-glucan main chain that possesses additional single β-(1,6)-bound D-glucose residues at approximately every third monomer of the backbone2,3,4. The average molecular weight ranges from 6 × 106 to 1.3 × 107 g moL−1 5,6. In aqueous solution, SCH exists as a trimeric molecule with three twisted glucan chains held together by hydrogen bonds and the β-(1,6)-bound D-glucose residues pointing towards the outside6,7,8,9. The helical secondary structure is stable in a broad pH range and at high temperatures, starting to dissolve into single chains only at pH > 12 and above 135 °C9,10. The rigidity of the triplex is considered to be the prime reason for the high viscosities of aqueous SCH solutions and their pseudoplastic flow behavior, since its denaturation leads to strong reduction of viscosity1,6,9,10,11. Because of the stable viscosity at high temperatures and high salt concentrations, SCH is tested as polymer flooding agent for enhanced oil recovery12,13. Furthermore, SCH has several bioactive properties, similar to other fungal β-(1,3)-D-glucans14,15,16,17,18. It shows antitumoral and immunomodulating effects which are assumed to be based on the enhancement of cell-mediated immune response19,20,21,22.
Because of the potential of SCH in different applications, specific SCH antibodies for quantitative trace analysis or for the investigation of the role of particular conformations for glucan bioactivity are needed. Towards this, we have generated recombinant antibodies (rAbs) against SCH by antibody phage display23. Next to SCH, these antibodies were identified to bind also to other similar β-(1,6)-branched β-(1,3)-D-glucans like scleroglucan and cinerean24,25,26. Further specificity profiling indicated the triple helical structure with the protruding β-(1,6)-linked D-glucose as a crucial factor for binding. Denaturation of the secondary structure resulted in a sharp decrease of binding affinity and no binding was detected for β-(1,6)-D-gentiobiose and laminarihexaose representing the β-(1,6)-branches and β-(1,3)-backbone. For validation of the hypothesis that the secondary structure of SCH is indeed important for recognition, structure analysis of the antibody paratope would be required to develop a structural model that describes the interaction with SCH and related molecules.
Here, we have determined the crystal structure of the antigen binding fragment (Fab) of anti-SCH antibody JoJ48C11, both in the apo form and in complex with the oligosaccharide laminarihexaose. These structures allow modelling of an antibody/SCH complex which suggests that all three chains of the helical glucan engage in interactions with the paratope of JoJ48C11. Importantly, these interactions involve several protruding β-(1,6)-bound glucose residues of SCH, explaining the specificity of the antibody. The model was validated by introducing point mutations into JoJ48C11, corroborating its correctness.
Results
Structure analysis of JoJ48C11 Fab and the JoJ48C11 Fab/laminarihexaose complex
In order to obtain detailed information about the binding of SCH and other β-(1,3)-branched β-(1,6)-D-glucans by JoJ48C11, we resorted to an X-ray crystallographic structure analysis. For this, we produced recombinant Fab fragments of JoJ48C11 by adding human constant CH1 and Ckappa domains to the respective variable regions of the initial JoJ48C11 scFv fragment and crystallized the purified protein to collect diffraction data.
Initial phasing of the JoJ48C11 Fab fragment was performed by molecular replacement with the structure of a chimeric antibody Fab fragment against CD25 (PDB entry 1MIM) as a search model27. The resulting structure was refined to 3.0 Å resolution. The JoJ48C11 Fab fragment adopts the expected heterodimeric structure of a heavy chain fragment and a light chain both consisting of a constant (C) and a variable (V) immunoglobulin (Ig) domain. The Ig domains show the typical immunoglobulin fold characterized by two anti-parallel β-sheets packed against each other (Fig. 1a)28. Not surprisingly, backbone atoms can easily be superposed onto other Fab structures, and even several structures with almost identical CL, CH and VL domains including their CDRs can be found (Table 1). However, with respect to previously published Fab fragments, the VH domain of JoJ48C11 Fab is slightly different, especially in the CDR3 region (Fig. 1b,c).
Structure of JoJ48C11 Fab. (a) Overall structure of JoJ48C11 Fab. The colors for each chain are green and cyan for heavy chain and light chain, respectively. CDR-region on heavy chain and light chain shown as brown and magenta colors. Sticks indicate important amino acid residues for binding to triple-helical SCH. (b) Superposition of variable regions of the heavy chain of JoJ48C11 and previously published Fab fragments. The colors are green for JoJ48C11, and red, blue or yellow for an antibody against SPE7 (PDB entry 1OAQ), Fab316.1 (PDB entry 5D93) or 10D10 (PDB entry 5T5N), respectively. (c) Superposition of the variable regions of the light chain of JoJ48C11 and previously published Fab fragments. The colors are cyan for JoJ48C11, and red, blue or yellow for an antibody against TRAAK (PDB entry 4I9W), B7-H6 (PDB entry 4ZSO) or MFE-23 (PDB entry 1QOK), respectively.
For understanding of the molecular determinants that contribute to the recognition of SCH by JoJ48C11, we aimed at obtaining the crystal structure of a complex with SCH but failed despite extensive attempts. Therefore, we resorted to structure determination of a complex with the less complex oligosaccharide laminarihexaose, which is a β-(1,3)-linked unbranched glucose hexamer. Electron density for two glucose moieties was observed when crystals were soaked with high concentration of the ligand (50 mM laminarihexaose) for one week. Interestingly, laminarihexaose does not show binding to JoJ48C11 in an in vitro affinity assay23, indicating that this is a good example for the sensitivity of protein crystallography to detect lower affinity29. The JoJ48C11 Fab/laminarihexaose structure was refined to 2.4 Å resolution. In the complex, Asp105H of the heavy chain CDR3 region binds the O4- and O6-atoms of the non-reducing end of laminarihexaose in a bidentate fashion (Fig. 2a and Supplementary Fig. S1). To confirm the observed interaction of Asp105H, we generated an alanine mutant and produced it as scFv-Fc. Binding of JoJ48C11-Asp105AlaH scFv-Fc to SCH was completely abrogated in a titration ELISA, which corroborates the importance of Asp105H and the significance of the JoJ48C11 Fab/laminarihexaose complex crystal structure.
Structural models of the binding between JoJ48C11 Fab and glucose moieties. (a) X-ray crystal structure of JoJ48C11 Fab complex involved in laminarihexaose. Glucose residues of laminarihexaose bound to JoJ48C11 Fab are shown as ball-and-sticks (gray) with mFo-DFc electron density map contoured at 2.5 σ. Dashed lines indicate potential hydrogen bonds. (b) Superposition of the laminarihexaose complex structure (gray) and the SCH RU binding model derived by docking calculations (yellow).
The apo structure of JoJ48C11 Fab and the complex with laminarihexaose were used as template for modeling of JoJ48C11 Fab in complex with the triple helical SCH as described below.
Modelling the interaction of JoJ48C11 with triple helical SCH
To further refine insight into the JoJ48C11 Fab/SCH interaction, we used SwissDock to generate models of a complex with the repeating unit (RU) of SCH and the apo structure of JoJ48C11 Fab. 256 models in 44 clusters were generated and then inspected to select the most likely models for further analysis. Two similar docking poses positioning the RU inside the typical antigen binding area of antibodies were identified. They proposed that Trp33H, His35H, Trp47H, Tyr50H, Glu59H, Trp100H, Trp90L and Asn93L were interacting residues. Subsequent mutagenesis studies proved His35H, Trp47H, Trp100H and Trp90L to be necessary for binding SCH, since their respective alanine mutants showed significant decrease of binding strength with EC50 values of 1.1 nM to 10.9 nM, which are higher than 0.6 nM (3 times the EC50 value of wild type JoJ48C11 scFv-Fc). It is important to note that the main interaction sites predicted by docking are different from the position identified in the crystal structure with laminarihexaose, suggesting that JoJ48C11 may contain two separated recognition motives for β-(1-6)-linked glucose moieties (Fig. 2b).
With the information from the crystal complex and the docking poses with the RU of SCH, we aimed at generating a model of JoJ48C11 in complex with triple helical SCH. Interestingly, the binding sites for the terminal glucose moiety of laminarihexaose observed in the crystal structure and the second binding site identified by docking calculation are approx. 18 Å apart, which corresponds very well to the helix pitch distance of the SCH chains in the triple-helical form (Figs 2b and 3a)30. We therefore created a model of JoJ48C11 Fab in complex with triple-helical SCH by superimposing a SCH triple helix structure from the literature onto the β-(1,6)-linked glucose unit of the docked SCH RU (Supplementary Fig. S2)31. To corroborate this model, we examined additional residues that are located close to the predicted binding sites of the triple-helical SCH, namely Tyr27H, Ser31H, Tyr57H, Asp49L, Lys52L and Ser55L, by generating respective alanine exchange mutants in the scFv-Fc format. This revealed Tyr27H, Asp49L and Lys52L to be significantly involved in binding of SCH, validating our structural model of the JoJ48C11 Fab/triple-helical SCH interaction (Fig. 3b and Table 2).
Model of the complex between JoJ48C11 Fab and triple-helical SCH. (a) Overall view. The chains of SCH are colored black, blue and yellow, respectively for chain 1, 2 and 3. (b) Comparison of the calculated EC50 values from the Binding assay with SCH and point mutants of JoJ48C11 in the scFv-Fc format. The dashed line at 0.6 nM marks the EC50 value considered to be the threshold for indicating a significant decrease in binding strength. (c) Surface model of JoJ48C11 Fab in complex with triple-helical SCH. The CDR-regions of the antigen binding site are shown in gray and thick ball-and-sticks indicate important glucose moieties interacting with JoJ48C11 Fab. (d) Close-up view of the triple-helical SCH binding site of JoJ48C11 Fab.
The model suggests that five glucose units are involved in binding to JoJ48C11: two β-(1,6)-linked moieties of SCH chain 1 fit into the two binding cavities found in the crystal structure with laminarihexaose and in the docking studies with the RU of SCH, one β-(1,6)-linked and one β-(1,3)-linked glucose group of SCH chain 2 interact with VH and VL in the area between the two binding cavities, and one β-(1-3)-linked moiety of SCH chain 3 interacts with VL near the docking site of the RU of SCH. The distribution of torsion angles values at the β-(1,3)-glycosidic bonds of triple-helical SCH in the modeled complex with JoJ48C11 after energy minimization is very similar to values observed in crystal structures, indicating the high geometrical quality of the model (Supplementary Fig. S3). According to our binding studies, the antibody itself contributes eight amino acid residues (Tyr27H, His35H, Trp47H, Trp100H, Asp105H; Asp49L, Lys52L, Trp90L) to this interaction, acting mainly through hydrogen bonds or π-effects (Fig. 3c,d). Taken together, this provides an explanation for JoJ48C11’s specificity towards SCH triple helices.
Discussion
Basic characteristics for the paratope structure of carbohydrate binding antibodies were early established by studies of anti-dextran binding antibodies. They predicted that the respective antibodies consist of a cavity-shaped paratope for accommodation of terminal saccharide residues or of a groove structure for up to seven internal saccharide residues of a linear polysaccharide chain32,33. To date, the structures of a few anti-carbohydrate antibodies have been determined by X-Ray crystallography. They indeed show the predicted cavity or groove structures of their paratope and some even consist of a combined structure of both types34. To name one interesting example, the monoclonal antibody F22-4 that is directed against the O-Antigen (lipopolysaccharide) from serotype 2a Shigella flexneri consist of a groove-shaped paratope with two small cavities integrated. Co-crystallization with a synthetic fragment (decasaccharide) of the O-antigen clearly showed the binding-orientation of the helically bowed fragment along the groove with two branches of single glucose residues fitting into the small cavities35. For JoJ48C11 we stated that the combination of the triple helical structure with the protruding β-(1,6)-linked D-glucose is a crucial factor for binding23. Therefore, we expected a groove-shaped paratope for interchain recognition of SCH with at least one cavity-shaped binding site to accommodate a β-(1,6)-linked D-glucose.
Here, we discovered via protein crystallography and in silico docking that the paratope structure of JoJ48C11 consists of two cavity-shaped binding sites that are connected by a shallow groove. These cavities can accommodate single glucose residues and are approx. 18 Å apart, a distance that corresponds strikingly well to the helical pitch in structural models of triple-helical SCH30. This enabled us to generate a model of the JoJ48C11 Fab/SCH complex, which is defined by the protruding β-(1,6)-linked D-glucose residues positioned in the two cavities. Experimental validation by mutagenesis indicated that eight amino acids of JoJ48C11 predicted to be involved in binding of SCH, namely Tyr27H, His35H, Trp47H, Trp100H, Asp105H, Asp49L, Lys52L and Trp90L, are indeed required, confirming the correctness of the model.
The complete abrogation of binding by mutation of Asp105H reveals the critical function of this residue. As part of one of the two binding cavities, it was identified to engage in two hydrogen bonds with the glucose unit at the non-reducing end of laminarihexaose in the complex crystal structure. Such bidentate interactions between acidic residues and saccharide moieties are an important motif in protein/carbohydrate complexes36 and the model with SCH suggests that Asp105H contributes a similar interaction to a β-(1,6)-linked moiety from SCH chain 1.
In silico docking suggested that His35H, Trp47H, Trp100H and Trp90L establish walls around a second cavity for the binding of a second β-(1,6)-linked glucose moiety of SCH chain 1. Histidine and tryptophan are often found in carbohydrate binding sites, where they seem to interact through aromatic contacts36. Such interactions are known to determine the specificity of carbohydrate binding proteins, but their contribution to the stability of such complexes is rather modest37,38, which is in line with the observation that mutation of these residues led to a smaller affinity decrease than in the case of the Asp105AlaH substitution. However, the function of Trp47H and Trp100H may extend beyond establishing aromatic contacts. As a conserved residue in frame work 2 of the VH domain, Trp47H seems to possess an additional structural role: Herold et al. observed that Trp47H contributes to the stability of the VH domain as well as to the VH/VL association in the antibodies MAK33 and 2A2 rheumatoid factor39. Trp100H, on the other hand, seems to involve the an additional hydrogen bond between the indole group and a β-(1,3)-glucose moiety of SCH chain 3. A similar interaction has also been observed by Cygler et al. for an antibody against polysaccharide O-antigen of pathogenic Salmonella of serogroup B40. Interestingly, in order to avoid clashes with SCH, Trp100H has to adopt a different sidechain rotamer than is observed the apo structure. The required conformation is found in two out of four copies of the laminarihexaose complex, however, which may be indicative of crosstalk between the two glucose binding sites (Supplementary Fig. S4).
The potential involvement of Tyr27H, Asp49L and Lys52L in SCH recognition was only discovered from the JoJ48C11/triple-helical SCH complex model. Tyr27L seems to interact with a β-(1,6)-bound glucose of SCH chain 2, whereas Asp49L and Lys52L engage in hydrogen bonds with one β-(1,3)-bound glucose unit of the same SCH chain. Of these residues, Asp49L is especially important as can be concluded from the large decrease in binding affinity observed after its mutation to alanine (Fig. 3b).
In summary, we have determined the structure of the anti-SCH antibody JoJ48C11 and obtained further insight into SCH binding by combining crystal structure analysis of a complex with a molecule that does not show binding in ELISA experiments, in silico docking of a SCH RU and modeling of the JoJ48C11 Fab/triple-helical SCH complex by hand. The model is consistent with experimental data and validates our previous hypothesis about the specificity of JoJ48C11 towards SCH and other similar β-(1,6)-branched β-(1,3)-D-glucans, namely that the β-(1,6)-bound D-glucose residues in conjunction with the triple-helical structure constitute the binding epitope for the antibody JoJ48C1123. Our work provides first insight into the structural principles that govern the binding of triple-helical SCH to a SCH-specific antibody and provides another example of an anti-carbohydrate antibody structure in complex with its antigen.
Materials and Methods
Preparation of JoJ48C11 as Fab for crystallography
JoJ48C11 was produced as a Fab in HEK239–6E cells (National Research Council, Biotechnological Research Institute). Towards this, the DNA encoding VH and VL of JoJ48C11 scFv were cloned into the respective vectors pCSE2.5-Fab-k-His-XP and pCSE2.5-Fab-h-His-XP23. A mixture containing 12.5 µg of both vectors was used for PEI-mediated transfection of 25 mL culture (about 1.5 × 106 cells mL−1). Transfection and production were carried out as described previously23,41. After production, the Fab was isolated by His-tag affinity purification. 1 mL of Chelating Sepharose Fast Flow (GE Healthcare) complexed with nickel was incubated with the cell free supernatant supplemented with 0.5 M NaCl. The sepharose was washed in a gravity flow column with 25 volumes of His-tag binding buffer (0.5 M NaCl, 20 mM Na2HPO4, 20 mM NaH2PO4, 10 mM imidazole, pH 7.4) and the Fab was eluted in 2 mL 0.1 M EDTA in PBS (8.0 g L−1 NaCl, 0.2 g L−1 KCl, 1.44 g L−1 Na2HPO3*4 H2O, 0.24 g L−1 KH2PO4, pH 7.4). Possible agglomerates were removed by subsequent size exclusion chromatography. For this, the eluate of the His-tag affinity purification was loaded onto a Superdex 75 HiLoad 16/60 column (GE Healthcare) running at 0.75 mL min−1 in crystallization buffer (20 mM Tris-HCl, 150 mM NaCl, pH 8.0). The resulting monodisperse Fab was concentrated to 7.2 mg mL−1 with Amicon Ultra – 0.5 mL Centrifugal Filters 30 K (Merck Millipore) and directly used for crystallization.
Crystallization and data collection
Initial crystallization experiments were carried out with a HoneyBee crystallization robot (Digilab) and 96-well sitting-drop Intelli-plates (Art Robbins Instruments) at 200 nL volume of protein and an equal volume of reservoir solution. Clusters of needle-shaped multicrystals growing from a single nucleation center were obtained at 20 °C with a precipitant containing 0.1 M Tris pH 8.5, 0.2 M lithium sulfate and 30% w/v PEG 4000. Crystals were washed in cryoprotectant (0.1 M Tris pH 8.5, 0.2 M lithium sulfate, 30% w/v PEG 4000 and 20% w/v glycerol) before flash-cooling in liquid nitrogen. A single needle was isolated and a 3 Å data set was collected from two wedges at 100 K on beamline P11 of the PETRAIII-synchrotron at DESY (Hamburg, Germany), using a PILATUS 6M-F detector to merge 1800 and 400 0.1°-frames, respectively. The crystal belonged to the monoclinic space group P21, with cell parameters of a = 94.03 Å, b = 112.86 Å, c = 140.82 Å and β = 98.62°. The asymmetric unit contained 6 copies of Fab fragment with a calculated Matthews parameter (VM) of 2.41 Å3/Da, corresponding to a solvent content of 48.9%.
For optimization of the crystallization, macroseeding was carried out with drops consisting of 500 nL protein solution, 600 nL precipitant (0.1 M HEPES pH 7.5, 0.1 M sodium acetate, 0.2 M lithium sulfate, 25% w/v PEG 4000) and 100 nL macroseed crystal from 0.1 M Tris pH 8.5, 0.2 M lithium sulfate and 30% w/v PEG 4000, set up with an OryxNano crystallization robot (Douglas Instruments Ltd). Crystals were observed after 2 months and were soaked by adding 50 mM laminarihexaose to the drop for 1 week and subsequent flash freezing in liquid nitrogen without additional cryoprotectant. Diffraction data were collected from 3600 0.05°-oscillation images to a maximum resolution of 2.4 Å. The complex crystal belonged to space group P21 with cell parameters of a = 81.73 Å, b = 131.50 Å, c = 91.03 Å and β = 91.51°. The asymmetric unit contained 4 copies of the Fab fragment, with a calculated Matthews parameter (VM) of 2.39 Å3/Da (solvent content 48.5%). Diffraction data were processed and scaled using autoPROC with XDS, pointless and aimless42,43,44,45,46. Statistics for the data collection are described in Table 3.
Structure determination and refinement
The structure of the anti-SCH JoJ48C11 Fab was solved by the automated molecular replacement pipeline BALBES (https://www.ccp4.ac.uk/ccp4online/), using the structure of a Fab fragment of a chimeric antibody against CD25 (PDB entry 1MIM) as a search model27. The complex structure with laminarihexaose was solved by molecular replacement with PHASER as included in the PHENIX software suite using the apo structure of JoJ48C11 Fab as a search model47,48. An initial atomic model was manually improved using COOT and refined with PHENIX and REFMAC by standard protocols49,50. Refinement statistics for the JoJ48C11 Fab fragment structures are summarized in Table 3. Coordinates and structure factors have been deposited in the Protein Data Bank (PDB) with accession codes 6EV1 (JoJ48C11 Fab) and 6EV2 (JoJ48C11 Fab:laminarihexaose complex)51. Figures were prepared using PYMOL52.
Molecular modeling
Molecular docking calculations were performed using the SwissDock web service (http://swissdock.vital-it.ch/) with default parameters and settings53,54. The variable region of the apo structure of JoJ48C11 Fab (residue 1 to 116 of chain A (VH) and 1 to 106 of chain B (VL)) was selected as the target. Water molecules were removed from the structure. For the ligand, a three-dimensional model of the SCH RU was obtained from the PubChem Compound Database (CID:24777) and was converted into MOL2 file format using YASARA View55,56. Results were visualized with the UCSF Chimera package and unique docking poses were selected by visual inspection57.
To derive a model for the interaction of JoJ48C11 with triple-helical SCH, the selected docking pose of the SCH RU was superposed onto chain A and B of the laminarihexaose complex. Residues Leu99 to Asp105 of chain A and Lys44 to Val57 as well as Gln89 to Asn93 of chain B were replaced with the corresponding residues from chain A and B of the apo structure due to the fact that Trp100 of chain A and Asp49 and Trp90 of chain B adopted different sidechain rotamers than in the apo structure that had been used for the docking calculations with SCH RU. The model of triple-helical SCH was generated using a structure of the triple-helical curdlan as a template (http://polysac3db.cermav.cnrs.fr/polysacdb/curdlan-II/curdlan2_3chains_expanded.pdb in PolySac3DB), which was modified into triple-helical SCH by manually adding β-(1,6)-bound glucose moieties homogenously at every third glucose moiety of each chain58,59. Subsequently, triple-helical SCH was fitted onto the JoJ48C11 Fab structure by visual superposition of two β-(1,6)-bound glucose with the two glucose moieties from the complex structure with laminarihexaose and the docking model with SCH RU. Subsequently, the two β-(1,6)-bound glucose of triple-helical SCH used for the superposition were replaced with the two glucose moieties from the laminarihexaose complex and the SCH RU docking pose. Finally, energy minimization was performed with the YASARA Energy Minimization Server (http://www.yasara.org/minimizationserver.htm)60. The complete docking and modeling procedure is summarized in Supplementary Fig. S1.
Generation and preparation of JoJ48C11 mutants as scFv-Fc
The mutants of JoJ48C11 variable chains for the binding studies were derived by quick change PCR for site directed mutagenesis61. PCR experiments were conducted with Phusion® High Fidelity DNA Polymerase (Thermo Fisher Scientific). Primer pairs were designed for each mutation site with the mismatch alanine codon framed by at least six bases in the 5′-direction and thirteen bases in the 3′-direction. The mutated scFv DNA sequence was cloned into pCSE2.6-mIgG2c-Fc-XP vector and used for transfection of HEK cells (EXPI293-F™, Thermo Fisher Scientific)41. The cells were cultivated as described above. For transfection, 5 µg of the vector DNA was added to 250 µL culture medium and mixed with 250 µL medium containing 25 µg polyethylenimine. 5 mL of cells (ca. 1.5 × 106 cells mL−1) were transferred into 40 mL screw cap tubes (Sarstedt), the DNA-PEI mixture was added and the culture was incubated at 37 °C, 190 rpm as well as 5% CO2 in the atmosphere (HERAcell™, Thermo Fisher Scientific and Celltron, Infors). 48 h after transfection the culture was fed with 5 mL HEK TF medium (Xell AG) supplemented by 8 mmol L−1 L-glutamine and 1 mL of HEK FS medium (Xell AG). The scFv-Fc mutants were isolated by protein A affinity purification. 9.5 ml of cell free supernatant was incubated with 500 µL of protein A purification resin (MabSelect™ SuRe™, GE Healthcare). The loaded resin was washed with 20 volumes PBS and the scFv-Fc was eluted in 2 mL of 100 mM citrate puffer (pH 3). For pH neutralization, 220 µL of 1 M Tris was added immediately after elution. Afterwards the buffer was exchanged for PBS by centrifugation with Zeba™ desalt spin columns (Thermo Fisher Scientific). The concentrations of the antibody preparations were calculated by their absorbance at 280 nm (NanoDrop 2000, Thermo Fisher Scientific).
Titration ELISA
Titration ELISA (enzyme-linked immunosorbent assay) was performed on Carbo-BIND™ multiwell plates (Corning) loaded with proteinase K-treated SCH (SCH-PK) as described before23. Briefly, serial dilutions of the scFv-Fc antibodies ranging from 0.03 pM to 950 nM were prepared in blocking solution (2% w/v milk powder and 0.05% w/v Tween® 20 in PBS) and added to the blocked multiwell plates (100 µL per well). After 1 hour incubation, the plates were washed 3 times with PBST (0.05% w/v Tween® 20 in PBS). For the titration of the point mutants in the scFv-Fc format, the plates were incubated with peroxidase-conjugated goat anti-murine Fc antibody (A0168, Sigma-Aldrich, 1:40,000 in blocking solution, 100 µL per well). For Detection of JoJ48C11 in the Fab format, the plates were first incubated with a mouse anti-His-tag antibody (DIA-900, Dianova, 100 µL per well, 40 ng ml−1) before incubation with the peroxidase-conjugated antibody. The ELISA was developed by adding 100 µL TMB solution (20 volumes 30 mM potassium citrate, 0.5 M citric acid, pH 4.1 and 1 volume 10 mM 3,3′,5,5′-tetramethylbenzidine, 10% v/v acetone, 90% v/v ethanol, 0.3% v/v H2O2)) per well. The color reaction was stopped after 10 minutes by addition of 100 µL of 0.5 M H2SO4 per well. The resulting absorption was measured at 450 nm (reference wavelength 620 nm). Each mutant was investigated in three independent experiments.
The datasets generated during and/or analyzed during the current study are available from the corresponding author on reasonable request.
References
Kikumoto, S., Miyajima, T., Yoshizumi, S., Fujimoto, S. & Kimura, K. Polysaccharide produced by Schizophyllum commune. Part I. Formation and some properties of an extracellular polysaccharide. J. Agric. Chem. Soc. Japan 44, 337–342 (1970).
Kikumoto, S., Miyajima, T., Kimura, K., Okubo, S. & Komatsu, N. Polysaccharide produced by schizophyllum commune. Part II. Chemical structure of an extracellular polysaccharide. J. Agric. Chem. Soc. Japan 45, 162–168 (1971).
Tabata, K., Ito, W., Kojima, T., Kawabata, S. & Misaki, A. Ultrasonic degradation of schizophyllan, an antitumor polysaccharide produced by Schizophyllum commune fries. Carbohydr. Res. 89, 121–135 (1981).
Schulz, D. & Rapp, P. Properties of the polyalcohol prepared from the β-d-glucan schizophyllan by periodate oxidation and borohydride reduction. Carbohydr. Res. 222, 223–231 (1991).
Rau, U., Müller, R., Cordes, K. & Klein, J. Process and molecular data of branched 1,3-β-D-glucans in comparison with xanthan. Bioprocess Eng. 5, 89–93 (1990).
Norisuye, T., Yanaki, T. & Fujita, H. Triple helix of a Schizophyllum commune polysaccharide in aqueous solution. J. Polym. Sci. Polym. Phys. Ed. 18, 547–558 (1980).
Sato, T., Norisuye, T. & Fujita, H. Triple helix of Schizophyllum commune polysaccharide in dilute solution. 5. Light scattering and refractometry in mixtures of water and dimethyl sulfoxide. Macromolecules 16, 185–189 (1983).
Yanaki, T., Norisuye, T. & Fujita, H. Triple helix of Schizophyllum commune polysaccharide in dilute solution. 3. Hydrodynamic properties in water. Macromolecules 13, 1462–1466 (1980).
Kashiwagi, Y., Norisuye, T. & Fujita, H. Triple helix of Schizophyllum commune polysaccharide in dilute solution. 4. light scattering and viscosity in dilute aqueous sodium hydroxide. Macromolecules 14, 1220–1225 (1981).
Yanaki, T., Tabata, K. & Kojima, T. Melting behaviour of a triple helical polysaccharide schizophyllan in aqueous solution. Carbohydr. Polym. 5, 275–283 (1985).
Rau, U. & Wagner, F. Non-newtonian flow behaviour of colloid-disperse glucan solutions. Biotechnol. Lett. 9, 95–100 (1987).
Rau, U., Haarstrick, A. & Wagner, F. Eignung von Schizophyllan-Lösungen zum Polymerfluten von Erdöl-Lagerstätten mit hoher Temperatur und Salinität. Chemie Ing. Tech. 64, 576–577 (1992).
Leonhardt, B., Santa, M., Steigerwald, A. & Kaeppler, T. Polymer flooding with the polysaccharide Schizophyllan - First field trial results. In From Fundamental Science to Deployment: 17th European Symposium on Improved Oil Recovery, IOR 2013 (2013).
Meng, X., Liang, H. & Luo, L. Antitumor polysaccharides from mushrooms: a review on the structural characteristics, antitumor mechanisms and immunomodulating activities. Carbohydr. Res. 424, 30–41 (2016).
Komatsu, N. et al. Host-mediated antitumor action of schizophyllan, a glucan produced by Schizophyllum commune. Japanese J. Cancer Res. 60, 137–144 (1969).
Mansour, A., Daba, A., Baddour, N., El-Saadani, M. & Aleem, E. Schizophyllan inhibits the development of mammary and hepatic carcinomas induced by 7,12 dimethylbenz(α)anthracene and decreases cell proliferation: comparison with tamoxifen. J. Cancer Res. Clin. Oncol. 138, 1579–1596 (2012).
Rau, U. Schizophyllan. In Biotechnology of Biopolymers. From Synthesis to Patents (Vol. 1) (eds Steinbüchel, A. & Doi, Y.) 703–735 (Wiley-VCH Verlag GmbH & Co. KGaA, 2005).
Shimizu, Y. et al. Augmentation of immune responses of pelvic lymph node lymphocytes in patients with cervical cancer by sizofiran. Nihon Sanka Fujinka Gakkai Zasshi 41, 2013–2014 (1989).
Ooi, V. E. C. & Liu, F. Immunomodulation and Anti-Cancer Activity of Polysaccharide- Protein Complexes. Curr. Med. Chem. 7, 715–729 (2000).
Suzuki, M., Arika, T., Amemiya, K. & Fujiwara, M. Cooperative role of T lymphocytes and macrophages in anti-tumor activity of mice pretreated with schizophyllan (SPG). Jpn. J. Exp. Med. 52, 59–65 (1982).
Sugawara, I., Lee, K. C. & Wong, M. Schizophyllan (SPG)-treated macrophages and anti-tumor activities against syngeneic and allogeneic tumor cells. I. Characteristics of SPG-treated macrophages. Cancer Immunolgy Immunother. 16, 137–144 (1984).
Tsuchiya, Y., Igarashi, M., Inoue, M. & Kumagai, K. Cytokine-related immunomodulating activities of an anti-tumor glucan, sizofiran (SPG). J. Pharmacobiodyn. 12, 616–625 (1989).
Josewski, J. et al. Generation of recombinant antibodies against beta-(1,6)-branched beta-(1,3)-D-glucan Schizophyllan from immunized mice via phage display. Biotechnol. Res. Int. 2017 (2017).
Rinaudo, M. & Vincendon, M. 13C NMR structural investigation of scleroglucan. Carbohydr. Polym. 2, 135–144 (1982).
Bluhm, T. L., Deslandest, Y. & Marchessault, R. H. Solid-state and solution conformation of scleroglucan. Carbohydr. Res. 100, 117–130 (1982).
Gawronski, M. et al. Triple helix of the polysaccharide cinerean in aqueous solution. Macromolecules 30, 6994–6996 (1997).
Long, F., Vagin, A. A., Young, P. & Murshudov, G. N. BALBES: A molecular-replacement pipeline. Acta Crystallogr. Sect. D Biol. Crystallogr. 64 (2007).
Bork, P., Holm, L. & Sander, C. The immunoglobulin fold: Structural classification, sequence patterns and common core. J. Mol. Biol. 242 (1994).
Tickle, I., Sharff, A., Vinkovic, M., Yon, J. & Jhoti, H. High-throughput protein crystallography and drug discovery. Chem. Soc. Rev. 33, 558–565 (2004).
Bae, A.-H., Numata, M., Yamada, S. & Shinkai, S. New approach to preparing one-dimensional Au nanowires utilizing a helical structure constructed by schizophyllan. New J. Chem. 31, 618–622 (2007).
Kony, D. B., Damm, W., Stoll, S., van Gunsteren, W. F. & Hünenberger, P. H. Explicit-solvent molecular dynamics simulations of the polysaccharide schizophyllan in water. Biophys. J. 93, 442–455 (2007).
Kabat, E. A. Problems in understanding the generation of antibody complementarity. In Recent Advances in Immunology (eds Müftüoğlu, A. Ü. & Barlas, N.) 1–14, https://doi.org/10.1007/978-1-4684-4649-4 (Springer US, 1984).
Padlan, E. A. & Kabat, E. A. Model-building study of the combining sites of two antibodies to alpha(1 → 6)dextran. Proc Natl Acad Sci USA 85, 6885–6889 (1988).
Haji-Ghassemi, O., Blackler, R. J., Young, N. M. & Evans, S. V. Antibody recognition of carbohydrate epitopes. Glycobiology 25, 920–952 (2015).
Vulliez-Le Normand, B. et al. Structures of synthetic O-antigen fragments from serotype 2a Shigella flexneri in complex with a protective monoclonal antibody. Proc. Natl. Acad. Sci. USA 105, 9976–9981 (2008).
Vyas, N. K. Atomic features of protein-carbohydrate interactions. Curr. Opin. Struct. Biol. 1, 732–740 (1991).
Asensio, J. L., Arda, A., Canada, F. J. & Jimenez-Barbero, J. Carbohydrate - Aromatic interactions. Acc. Chem. Res. 46, 946–954 (2013).
Hudson, K. L. et al. Carbohydrate-Aromatic Interactions in Proteins. J. Am. Chem. Soc. 137, 15152–15160 (2015).
Herold, E. M. et al. Determinants of the assembly and function of antibody variable domains. Sci. Rep. 7, 1–17 (2017).
Cygler, M., Rose, D. R. & Bundle, D. R. Recognition of a cell-surface oligosaccharide of pathogenic Salmonella by an antibody Fab fragment. Science 253, 442–445 (1991).
Jäger, V. et al. High level transient production of recombinant antibodies and antibody fusion proteins in HEK293 cells. BioMed Cent. Biotechnol. 13, 52 (2013).
Vonrhein, C. et al. Data processing and analysis with the autoPROC toolbox. Acta Crystallogr. Sect. D Biol. Crystallogr. 67 (2011).
Kabsch, W. XDS. Acta Crystallogr. Sect. D Biol. Crystallogr. 66 (2010).
Evans, P. Scaling and assessment of data quality. Acta Crystallogr. Sect. D Biol. Crystallogr. 62 (2006).
Evans, P. R. An introduction to data reduction: Space-group determination, scaling and intensity statistics. Acta Crystallogr. Sect. D Biol. Crystallogr. 67 (2011).
Evans, P. R. & Murshudov, G. N. How good are my data and what is the resolution? Acta Crystallogr. Sect. D Biol. Crystallogr. 69 (2013).
McCoy, A. J. et al. Phaser crystallographic software. J. Appl. Crystallogr. 40 (2007).
Adams, P. D. et al. PHENIX: A comprehensive Python-based system for macromolecular structure solution. Acta Crystallogr. Sect. D Biol. Crystallogr. 66 (2010).
Emsley, P. & Cowtan, K. Coot: Model-building tools for molecular graphics. Acta Crystallogr. Sect. D Biol. Crystallogr. 60 (2004).
Murshudov, G. N. et al. REFMAC5 for the refinement of macromolecular crystal structures. Acta Crystallogr. Sect. D Biol. Crystallogr. 67 (2011).
Berman, H. M. et al. The Protein Data Bank. Nucleic Acids Res. 28 (2000).
LLC, S. The PyMOL Molecular graphics System. (2015).
Grosdidier, A., Zoete, V. & Michielin, O. SwissDock, a protein-small molecule docking web service based on EADock DSS. Nucleic Acids Res. 39 (2011).
Grosdidier, A., Zoete, V. & Michielin, O. Fast docking using the CHARMM force field with EADock DSS. J. Comput. Chem. 32 (2011).
Kim, S. et al. PubChem substance and compound databases. Nucleic Acids Res. 44 (2016).
Krieger, E. & Vriend, G. YASARA View - molecular graphics for all devices - from smartphones to workstations. Bioinformatics 30, 2981–2982 (2014).
Pettersen, E. F. et al. UCSF Chimera - A visualization system for exploratory research and analysis. J. Comput. Chem. 25 (2004).
Chuah, C. T., Sarko, A., Deslandes, Y. & Marchessault, R. H. Triple-Helical Crystalline Structure of Curdlan and Paramylon Hydrates. Macromolecules 16 (1983).
Sarkar, A. & Pérez, S. PolySac3DB: An annotated data base of 3 dimensional structures of polysaccharides. BioMed Cent. Bioinforma. 13, 302 (2012).
Krieger, E. et al. Improving physical realism, stereochemistry, and side-chain accuracy in homology modeling: Four approaches that performed well in CASP8. Proteins Struct. Funct. Bioinforma. 77 (2009).
Zheng, L. An efficient one-step site-directed and site-saturation mutagenesis protocol. Nucleic Acids Res. 32, e115–e115 (2004).
Holm, L. & Rosenström, P. Dali server: Conservation mapping in 3D. Nucleic Acids Res. 38 (2010).
Acknowledgements
We appreciate the additional support of Viola Fühner, André Frenzel and Michael Hust in data analysis and writing of the manuscript. Especially, we thank the staff at beamline P11 of PETRAIII (Deutsches Elektronen Synchrotron (DESY) Hamburg, Germany) for giving us access to their facilities.
Author information
Authors and Affiliations
Contributions
U.R. and W.B. conceived the project. K.H.S. and J.J. designed the experiments. J.J. performed the biochemical experiments. K.H.S. performed the X-Ray crystallographic experiments. K.H.S. and J.J. performed analysis and wrote the manuscript. U.R., S.D. and W.B. contributed professionally to the data analysis and the manuscript. All authors reviewed the manuscript.
Corresponding author
Ethics declarations
Competing Interests
The authors declare no competing interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Sung, K., Josewski, J., Dübel, S. et al. Structural insights into antigen recognition of an anti-β-(1,6)-β-(1,3)-D-glucan antibody. Sci Rep 8, 13652 (2018). https://doi.org/10.1038/s41598-018-31961-x
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-018-31961-x
Keywords
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
