Abstract
Buildings are responsible for over 40% of total US energy use, of which about 40% is directly related to the operation of heating, ventilation and air-conditioning (HVAC) systems. Saving energy to heat and cool buildings would contribute substantially to sustainability. Here we propose a category of coloured low-emissivity films for building walls that constitute the main component of the building thermal envelope. We demonstrate high reflectance (~90%) in infrared wavelength range and selective reflectance in the visible light wavelength range for desired colours. These films can help minimize radiative heat exchange between the indoor and outdoor environments, thus saving energy for all-year cooling and heating while satisfying the required aesthetical effect. Simulations show that these films can help reduce heat gain and loss by up to 257.6 MJ per installation wall area annually. In the case of a typical midrise apartment building, the HVAC system can save up to 124.46 GJ (equal to 9.87% of the building’s HVAC energy consumption). By rough estimation, a global CO2 emission reduction of 1.14 billion metric tons annually could be achieved. Our work provides insights for innovative energy-saving building envelope materials that can help achieve global carbon neutrality and sustainability.
This is a preview of subscription content, access via your institution
Access options
Access Nature and 54 other Nature Portfolio journals
Get Nature+, our best-value online-access subscription
$29.99 / 30 days
cancel any time
Subscribe to this journal
Receive 12 digital issues and online access to articles
$119.00 per year
only $9.92 per issue
Buy this article
- Purchase on Springer Link
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
Data availability
The original data that support the findings of this study are available from the corresponding author upon request.
Code availability
The code for the building energy consumption model can be made available upon request.
Change history
01 February 2022
In the PDF version of this article initially published, the sets of heat-flow arrows in Fig. 4a and Fig. 4c were omitted. The arrows have now been restored to the PDF.
References
Yin, X., Yang, R., Tan, G. & Fan, S. Terrestrial radiative cooling: using the cold universe as a renewable and sustainable energy source. Science 370, 786–791 (2020).
Quadrennial Technology Review: An Assessment of Energy Technologies and Research Opportunities Ch. 5 (US Department of Energy, 2015); https://www.energy.gov/sites/prod/files/2017/03/f34/qtr-2015-chapter5.pdf
Heating and Cooling (US Department of Energy, accessed 16 April 2021); www.energy.gov/heating-cooling
Li, T. et al. A radiative cooling structural material. Science 364, 760–763 (2019).
Goetzler, W. Energy Savings Potential and RD&D Opportunities for Commercial Building HVAC Systems (US Department of Energy, 2017).
Jelle, B. P. Traditional, state-of-the-art and future thermal building insulation materials and solutions—properties, requirements and possibilities. Energy Build. 43, 2549–2563 (2011).
Pisello, A. L. State of the art on the development of cool coatings for buildings and cities. Sol. Energy 144, 660–680 (2017).
Zhai, Y. et al. Scalable-manufactured randomized glass–polymer hybrid metamaterial for daytime radiative cooling. Science 355, 1062–1066 (2017).
Mandal, J. et al. Hierarchically porous polymer coatings for highly efficient passive daytime radiative cooling. Science 362, 315–319 (2018).
Chen, Y. et al. Colored and paintable bilayer coatings with high solar-infrared reflectance for efficient cooling. Sci. Adv. 6, eaaz5413 (2020).
Zhou, L. et al. A polydimethylsiloxane-coated metal structure for all-day radiative cooling. Nat. Sustain. 2, 718–724 (2019).
Raman, A. P., Anoma, M. A., Zhu, L., Rephaeli, E. & Fan, S. Passive radiative cooling below ambient air temperature under direct sunlight. Nature 515, 540–544 (2014).
Hernández-Pérez, I. et al. Thermal performance of reflective materials applied to exterior building components—a review. Energy Build. 80, 81–105 (2014).
Li, X. et al. Integration of daytime radiative cooling and solar heating for year-round energy saving in buildings. Nat. Commun. 11, 6101 (2020).
Martilli, A., Clappier, A. & Rotach, M. W. An urban surface exchange parameterisation for mesoscale models. Bound. Layer Meteorol. 104, 261–304 (2002).
Albatici, R., Passerini, F., Tonelli, A. M. & Gialanella, S. Assessment of the thermal emissivity value of building materials using an infrared thermovision technique emissometer. Energy Build. 66, 33–40 (2013).
Avdelidis, N. P. & Moropoulou, A. Emissivity considerations in building thermography. Energy Build. 35, 663–667 (2003).
Aditya, L. et al. A review on insulation materials for energy conservation in buildings. Renew. Sustain. Energy Rev. 73, 1352–1365 (2017).
Jelle, B. P., Kalnæs, S. E. & Gao, T. Low-emissivity materials for building applications: a state-of-the-art review and future research perspectives. Energy Build. 96, 329–356 (2015).
Guo, W., Qiao, X., Huang, Y., Fang, M. & Han, X. Study on energy saving effect of heat-reflective insulation coating on envelopes in the hot summer and cold winter zone. Energy Build. 50, 196–203 (2012).
Juanicó, L. E. Thermal insulation of roofs by using multiple air gaps separated by insulating layers of low infrared emissivity. Constr. Build. Mater. 230, 116931 (2020).
Tenpierik, M. J. & Hasselaar, E. Reflective multi-foil insulations for buildings: a review. Energy Build. 56, 233–243 (2013).
Medina, M. A. A comprehensive review of radiant barrier research including laboratory and field experiments. ASHRAE Trans. 118, 400–407 (2012).
Principi, P. & Fioretti, R. Thermal analysis of the application of PCM and low emissivity coating in hollow bricks. Energy Build. 51, 131–142 (2012).
Fantucci, S. & Serra, V. Experimental assessment of the effects of low-emissivity paints as interior radiation control coatings. Appl. Sci. 10, 842 (2020).
Joudi, A., Svedung, H., Cehlin, M. & Rönnelid, M. Reflective coatings for interior and exterior of buildings and improving thermal performance. Appl. Energy 103, 562–570 (2013).
Fantucci, S. & Serra, V. Low-E paints enhanced building components: performance, limits and research perspectives. Energy Procedia 126, 274–281 (2017).
Shen, H., Tan, H. & Tzempelikos, A. The effect of reflective coatings on building surface temperatures, indoor environment and energy consumption—an experimental study. Energy Build. 43, 573–580 (2011).
Cai, L. et al. Temperature regulation in colored infrared-transparent polyethylene textiles. Joule 3, 1478–1486 (2019).
Peng, Y. & Cui, Y. Advanced textiles for personal thermal management and energy. Joule 4, 724–742 (2020).
Hsu, P.-C. et al. Radiative human body cooling by nanoporous polyethylene textile. Science 353, 1019–1023 (2016).
Peng, Y. et al. Nanoporous polyethylene microfibres for large-scale radiative cooling fabric. Nat. Sustain. 1, 105–112 (2018).
Hsu, P.-C. et al. A dual-mode textile for human body radiative heating and cooling. Sci. Adv. 3, e1700895 (2017).
Reale, A. et al. Spray coating for polymer solar cells: an up-to-date overview. Energy Technol. 3, 385–406 (2015).
Chen, Y. et al. Roll-to-roll production of metal–organic framework coatings for particulate matter removal. Adv. Mater. 29, 4–9 (2017).
Fan, L., Li, W., Jin, W., Orenstein, M. & Fan, S. Maximal nighttime electrical power generation via optimal radiative cooling. Opt. Express 28, 25460–25470 (2020).
Crawley, D. B., Pedersen, C. O., Lawrie, L. K. & Winkelmann, F. C. EnergyPlus: energy simulation program. ASHRAE J. 42, 49–56 (2000).
Acknowledgements
We thank Q. Li for helpful discussion and kind help. Part of this work was performed at the Stanford Nano Shared Facilities and the Stanford Nanofabrication Facility. S.F. acknowledges the support of the US Department of Energy (grant no. DE-FG-07ER46426).
Author information
Authors and Affiliations
Contributions
Y.C. and Y.P. conceived the idea. Y.P. designed the experiments and performed the material preparation and characterization with the help of Y.Y., Z.H., Y.M., J.T. and J.Z. L.F. and W.J. performed the modelling work. S.Z. and X.L. provided helpful discussion on EnergyPlus. L.C.G. helped with writing the manuscript. Y.C., A.M. and S.F. supervised the project. All the authors provided discussion and comments.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Sustainability thanks Tao Ma and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Supplementary Information
Supplementary Notes 1–3, Figs. 1–24, Tables 1 and 2, and References.
Rights and permissions
About this article
Cite this article
Peng, Y., Fan, L., Jin, W. et al. Coloured low-emissivity films for building envelopes for year-round energy savings. Nat Sustain 5, 339–347 (2022). https://doi.org/10.1038/s41893-021-00836-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41893-021-00836-x
This article is cited by
-
Bilateral passive thermal management for dynamical temperature regulation
Scientific Reports (2024)
-
Polydopamine adhesion of MXenes to cotton fabric for solar thermal and passive radiative heating
Journal of Materials Science (2024)
-
Night-time radiative warming using the atmosphere
Light: Science & Applications (2023)
-
A smart way to wrap a building
Nature Sustainability (2023)
-
Dynamic electrochromism for all-season radiative thermoregulation
Nature Sustainability (2023)